Efficient Design of Bi-circular Patch Antenna for 5G Communication with Mathematical Calculations for Resonant Frequencies

Wireless Personal Communications - In this paper the conventional circular patch has been reshaped by two circular arcs with the FR4 Epoxy material for substrate. This is supported by the...     

Design of a wideband microstrip antenna and the use of artificial neural networks in parameter calculation

This paper deals with the design of a multi-slot hole-coupled microstrip antenna on a substrate of 2 mm thickness that gives multi-frequency (wideband) characteristics. The Method of Moments (MoM)-based IE3D software was used to simulate the results for return loss, VSWR, the Smith chart, and the radiation patterns. A tunnel-based artificial neural network (ANN) was also developed to calculate the radiation patterns of the antenna. The radiation patterns were measured experimentally at 10.5 GHz and 12 GHz. The experimental results were in good agreement with the simulated results from IE3D and those of the artificial neural network. A new method of using a genetic algorithm (GA) in an artificial neural network is also discussed. This new method was used to calculate the resonant frequency of a single-shorting-post microstrip antenna. The resonant frequency calculated using the genetic-algorithm-coupled artificial neural network was compared with the analytical and experimental results. The results obtained were in very good agreement with the experimental results.     

Fast computation of multidimensional discrete Hartley transform

Efficient algorithms for the fast computation of 2D and 3D discrete Hartley transforms have been proposed. It is shown that the proposed algorithms offer a significant saving in computation over the existing methods for various array sizes.<>     

Thermal shock and thermal fatigue study of ceramic materials on a newly developed ascending thermal shock test equipment

A test equipment was designed to study thermal shock and thermal fatigue of ceramic materials subjected to fast heating (ascending). The equipment was designed to generate thermal stress in a test specimen by heating one surface of it by an oxy-hydrogen flame while cooling the opposite surface. The sample cracked when thermal stress exceeded its mechanical strength. The in situ crack formation was detected by an acoustic emission system coupled to the set up. The hot zone temperature was measured by an infra red pyrometer. The equipment was also designed to run thermal fatigue test cycles in automatic mode between two selected temperatures. The temperature and thermal stress distribution in the test specimen were modelled using finite element software. The effect of temperature distribution of the top and bottom surfaces on thermal stresses was studied. It was observed that the thermal stress is very sensitive to the temperature distribution on the top surface and maximum near the periphery of the top surface. This was in agreement with the experimental results in which the cracks were originated from the periphery of top surface. It was also observed that the failure temperature was higher for thicker samples.     

Synthesis of ductile titanium-titanium boride (Ti-TiB) composites with a beta-titanium matrix: The nature of TiB formation and composite properties

The study focused on the in-situ synthesis of titanium (Ti)-titanium boride (TiB) composites with β phase in the matrix by reaction sintering of TiB₂ with Ti and alloying element powders. The goal was to examine the nature of TiB whisker formation in three different kinds of powder mixtures: (1) β-Ti alloy powders and TiB₂; (2) α-Ti powder, a master alloy (Fe-Mo) powder containing the β-stabilizing elements, and TiB₂; and (3) α-Ti powder, a β-stabilizing elemental powder (Mo or Nb), and TiB₂. The effects of powder packing and the relative locations of powder particles on the morphological changes in TiB whisker formation and their growth were studied at processing temperatures ranging from 1100°C to 1300°C. The morphology, size, and distribution of whiskers were found to be influenced by the powder-packing conditions. A large particle-size ratio in bimodally packed mixtures led to the formation of a TiB monolithic layer around β grains. With a relatively finer starting powder, smaller size ratio, and trimodal packing arrangement, the TiB whiskers were found to be distributed more homogeneously in the matrix. The study also used the X-ray direct comparison method and the structure factor for the β phase to determine the volume fraction of TiB phase from X-ray data. Tensile tests and fractographic investigations were carried out on selected composites. The evolution of the composite microstructure, the influence of powder-packing variables, and the morphology and growth of TiB whiskers and their effect on mechanical properties are discussed.     

NMR studies of poly(2-hydroxy ethyl methacrylate-co-2-vinyl pyridine)

Copolymers of 2-hydroxy ethyl methacrylate-2-vinyl pyridine (H/V) of different composition were synthesized by free radical bulk polymerization using azobisisobutyronitrile (AIBN) as an initiator under nitrogen atmosphere. The copolymer compositions were calculated from ¹H NMR spectra. The reactivity ratios for H/V copolymers obtained from a linear Kelen-Tudos method (KT) and nonlinear error-in-variables method (EVM) are r_H = 0.50 ± 0.10, r_V = 1.04 ± 0.08 and r_H = 0.55, r_V = 1.06 respectively. The complete spectral assignment of methine, methylene, methyl, carbonyl, and aromatic carbon regions in term of compositional and configurational sequences of H/V copolymers were done with the help of ¹³C{¹H} NMR, distortionless enhancement by polarization transfer (DEPT), two-dimensional heteronuclear single quantum coherence (HSQC) along with total correlated spectroscopy (TOCSY). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A Maximum Likelihood Stereo Algorithm

A stereo algorithm is presented that optimizes a maximum likelihood cost function. The maximum likelihood cost function assumes that corresponding features in the left and right images are normally distributed about a common true value and consists of a weighted squared error term if two features are matched or a (fixed) cost if a feature is determined to be occluded. The stereo algorithm finds the set of correspondences that maximize the cost function subject to ordering and uniqueness constraints. The stereo algorithm is independent of the matching primitives. However, for the experiments described in this paper, matching is performed on the $cf4$individual pixel intensities.$cf3$ Contrary to popular belief, the pixel-based stereo appears to be robust for a variety of images. It also has the advantages of (i) providing adensedisparity map, (ii) requiringnofeature extraction, and (iii)avoidingthe adaptive windowing problem of area-based correlation methods. Because feature extraction and windowing are unnecessary, a very fast implementation is possible. Experimental results reveal that good stereo correspondences can be found using only ordering and uniqueness constraints, i.e., withoutlocalsmoothness constraints. However, it is shown that the original maximum likelihood stereo algorithm exhibits multiple global minima. The dynamic programming algorithm is guaranteed to find one, but not necessarily the same one for each epipolar scanline, causing erroneous correspondences which are visible as small local differences between neighboring scanlines. Traditionally, regularization, which modifies the original cost function, has been applied to the problem of multiple global minima. We developed several variants of the algorithm that avoid classical regularization while imposing several global cohesiveness constraints. We believe this is a novel approach that has the advantage of guaranteeing that solutions minimize the original cost function and preserve discontinuities. The constraints are based on minimizing the total number of horizontal and/or vertical discontinuities along and/or between adjacent epipolar lines, and local smoothing is avoided. Experiments reveal that minimizing the sum of the horizontal and vertical discontinuities provides the most accurate results. A high percentage of correct matches and very little smearing of depth discontinuities are obtained. An alternative to imposing cohesiveness constraints to reduce the correspondence ambiguities is to use more than two cameras. We therefore extend the two camera maximum likelihood toNcameras. TheN-camera stereo algorithm determines the “best” set of correspondences between a given pair of cameras, referred to as the principal cameras. Knowledge of the relative positions of the cameras allows the 3D point hypothesized by an assumed correspondence of two features in the principal pair to be projected onto the image plane of the remainingN− 2 cameras. TheseN− 2 points are then used to verify proposed matches. Not only does the algorithm explicitly model occlusion between features of the principal pair, but the possibility of occlusions in theN− 2 additional views is also modeled. Previous work did not model this occlusion process, the benefits and importance of which are experimentally verified. Like other multiframe stereo algorithms, the computational and memory costs of this approach increase linearly with each additional view. Experimental results are shown for two outdoor scenes. It is clearly demonstrated that the number of correspondence errors is significantly reduced as the number of views/cameras is increased.     

A novel sine augmented scaled sine cosine algorithm for frequency control issues of a hybrid distributed two-area power system

Neural Computing and Applications - In this research article, a novel approach is proposed by considering the sine augmented scaled sine cosine (SAS-SCA) Algorithm for the load frequency control of...     

Simulation Study of Dielectric Modulated Dual Material Gate TFET Based Biosensor by Considering Ambipolar Conduction

Silicon - In this paper, a dielectric modulated dual material gate TFET (DM-DMG_TFET)based biosensor is proposed. In order to detect various biomolecules, a nanogap cavity is formed by the...