Thermal and surface characterization of polyurethane–urea clay nanocomposite coatings

This paper reports synthesis and characterization of polyurethane–urea (PU‐urea) and the nanocomposites derived from the PU‐urea with silicate clays. Organophilic montmorillonite cotreated by cetyl trimethyl ammonium bromide (CTAB) was synthesized and used to prepare PU‐urea/montmorillonite nanocomposites coatings. PU‐ureas were prepared from polyethylene glycol (PEG), polypropylene glycol (PPG), trimethylol propane (TMP), and 4,4′‐diphenylmethane diisocyanate (MDI) by reacting excess diisocyanate with polyether glycols. The excess isocyanate of the prepolymers was cured with atmospheric moisture. The synthesized moisture cured PU‐urea and nanocomposites were characterized by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetric (DSC), and angle resolved X‐ray photoelectron spectroscopy (AR‐XPS). The thermal stability of the PU‐urea nanocomposites was higher relative to the mother PU‐urea films. DSC results showed a slight enhancement in the soft segment glass transition temperature after 3 wt % clay loading. The surface properties showed an enrichment of the soft segment toward the surface. An enhancement in the hard segment composition in the nanocomposite coatings has resulted in enhancing the phase mixing process. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2393–2401, 2006     

Architectural design and FPGA implementation of radix-4 CORDIC processor

A new scaled radix-4 CORDIC architecture that incorporates pipelining and parallelism is presented. The latency of the architecture is n/2 clock cycles and throughput rate is one valid result per n/2 clocks for n bit precision. A 16 bit radix-4 CORDIC architecture is implemented on the available FPGA platform. The corresponding latency of the architecture is eight clock cycles and throughput rate is one valid result per eight clock cycles. The entire scaled architecture operates at 56.96 MHz of clock rate with a power consumption of 380 mW. The speed can be enhanced with the upgraded version of FPGA device. A speed-area optimized processor is obtained through this architecture and is suitable for real time applications.     

A Spatial‐Context‐Based Approach for Automated Spatial Change Analysis of Piece‐Wise Linear Building Elements

Changes of designs and construction plans often cause propagative design modifications, tedious construction coordination, cascading effects of errors, reworks, and delays in project management. Among various building elements, those having piece‐wise linear geometries (i.e., connected straight line segments), such as connected straight sections of ducts in mechanical, electrical, and plumbing systems, frequently undergo spatial changes in response to the changes of their surroundings. On the other hand, the piece‐wise linear geometries pose challenges to analyzing and controlling changes in construction and facility management. State‐of‐the‐art 3D change detection algorithms often face ambiguities about which points belong to which objects when piece‐wise linear object are spacked in small spaces. This article examines a spatial‐context‐based framework that uses spatial relationships between piece‐wise linear building elements (ducts in this article) to enable fast and reliable association of 3D data with ducts in as‐designed models for supporting reliable change analysis. Three case studies showed that this framework outperformed a conventional change detection method, and could handle large dislocations of piece‐wise linear elements and occlusions.     

Effects of polymer molecular weight,concentration, and role of polyethylene glycol as additive on polyacrylonitrile homopolymer membranes

Polyacrylonitrile (PAN), is an important base polymer to cast porous membranes. In this work, a detailed study of the effects of molecular weight of PAN homopolymer and its concentration on the cast membrane has been undertaken. The effects of molecular weight of additive polyethylene glycol (PEG) and its concentration have also been investigated. The membranes are cast using dimethyl formamide as solvent using phase inversion technique. They are characterized in terms of porosity, water permeability, molecular weight cut off, average pore diameter, contact angle, and tensile strength at breaking point. Fourier transform infrared spectroscopy and scanning electron microscopy are used to characterize the chemical and morphological changes of the membrane surface. Further studies have been considered to evaluate the antifouling property of various membranes using filtration of bovine serum albumin solution. Membrane modified by PEG 400 membrane shows an improved separation performance and antifouling characteristics. POLYM. ENG. SCI., 54:2375–2391, 2014. © 2013 Society of Plastics Engineers     

Regime transition in viscous and pseudo viscous systems: A comparative study

A comprehensive quantitative study on the effect of liquid viscosity (1 ≤ µ_L ≤ 1149 mPa‐s) on the local flow phenomena of the gas phase in a small diameter bubble column is performed using ultrafast electron beam X‐ray tomography. The internal dynamic flow structure and the bubble size distribution shows a dual role of the liquid viscosity on the hydrodynamics. Further, the effect of solid concentration (C_s = 0.05, 0.20) on the local flow behavior of the gas phase is studied for the pseudo slurry viscosities similar to the liquid viscosities of the gas–liquid systems. The effects of liquid and pseudo slurry viscosities on flow structure, bubble size distribution, and gas phase distribution are compared. The bubble coalescence is significantly enhanced with the addition of particles as compared to the system without particles for apparently same viscosity. The superficial gas velocity at which transition from homogeneous bubbly to slug flow regime occurs is initiated by the addition of particles as compared to the particle free system for apparently same viscosity. © 2014 American Institute of Chemical Engineers AIChE J, 60: 3079–3090, 2014     

Long‐term impact of nitrogen and potassium fertilizers on yield,soil nutrients and biochemical parameters of tea

A field experiment was conducted with tea cultivar UPASI‐9 over a period of 9 years to evaluate the long‐term effects of nitrogen (N) and potassium (K) fertilizers on yield, biochemical parameters, soil and leaf nutrient status. The yield increase was as high as 66% over the control for N application of 450 kg ha^?1 year^?1. Polyphenol and amino acid contents increased with increase in K application rate. Positive and significant correlation was found between nitrate reductase activity and the amino acid content of the tea shoots. While ammoniacal nitrogen in the soil was not affected by the application of fertilizer, ammonium acetate extractable K increased. The failure to apply fertilizer resulted in depletion of the organic matter status of the soil. Although increased rate of nitrogen application increased the overall yield of made tea (kg ha^?1 year^?1), the specific yield (kg kg^?1 N) declined. The soil tended to become acidic from frequent application of high doses of nitrogenous fertilizer. The leaf NK status was significantly influenced by the various treatments. Copyright © 2004 Society of Chemical Industry     

Enhanced visible green and 1.5 μm radiative emission of Er~(3+) ions in Li_2O-PbO-Al_2O_3-B_2O_3 glasses for photonic applications

A series of Er~(3+) ions doped lithium lead alumino borate(LiPbAlB) glasses were synthesized via melt quench method and their structural,physical and optical properties were studied.Judd-Ofelt theory in correlation with the emission and absorption profiles was performed for the measurement of various radiative parameters for different transitions of Er~(3+) doped glasses.The as-prepared glasses show deep green(550 nm) as well as NIR(1532 nm) emission at 380 and 980 nm excitation wavelengths,respectively.The intensity of emission spectra increases with Er~(3+) ions concentration up to 1.5 mol% and beyond quenching is observed.The Dexter theory applied to the emission profiles reveals the interaction between Er~(3+)ions as dipole-dipole in nature.CIE color coordinates are found to fall in the green region of the visible spectrum.It is observed that 1.5 mol% of Er~(3+) ions concentration is optimum to exhibit the maximum quantum efficiency,branching ratios,gain bandwidth,emission cross-section,gain crosssection and aptly suitable for visible and NIR photonic applications.     

A multiplicative model of software defect repair times

We hypothesize that software defect repair times can be characterized by the Laplace Transform of the Lognormal (LTLN) distribution. This hypothesis is rooted in the observation that software defect repair times are influenced by the multiplicative interplay of several factors, and the lognormal distribution is a natural choice to model rates of occurrence of such phenomenon. Conversion of the lognormal rate distribution to an occurrence time distribution yields the LTLN. We analyzed a total of more than 10,000 software defect repair times collected over nine products at Cisco Systems to confirm our LTLN hypothesis. Our results also demonstrate that the LTLN distribution provides a statistically better fit to the observed repair times than either of the two most widely used repair time distributions, namely, the lognormal and the exponential. Moreover, we show that the repair times of subsets of defects, partitioned according to the Orthogonal Defect Classification (ODC) scheme also follow the LTLN distribution. Finally, we describe how the insights that lead to the LTLN repair time model allow us to consider and evaluate alternative process improvement strategies.     

A note on the deformation of consolidating spherical shell

This paper presents the solutions of the problem of deformation of a consolidating spherical shell of poro-elastic material. Jana and Sanyal have treated the same problem and obtained approximate solutions using Laplace Transform technique. The loading conditions taken by them seem to be unrealistic. By considering boundary conditions which are physically realisable, solutions have been derived in this paper. To obtain the solutions truncated Hankel transform technique has been used and no approximation has been made.     

The computer analysis of space frames with offset members

The problems involved in the analysis of three dimensional frames having offset prismatic members are investigated. The sources of offset considered are the rigid gusset plate effects and misalignment of members from specified joint positions. The secondary effects due to axial forces are also considered in the analysis. The displacement method of structural analysis is used with an iterative procedure to take into account the secondary effects. The complete stiffness matrix has been derived. The computer program developed, based on this analysis, is also explained. From the example of steel frame folded plate it is seen that the difference in maximum axial forces and bending moments due to the offset members are about 20%. It appears that the method, developed herein, for analysing space frames having offset members, offers a very direct and versatile approach to the problem of analysing structures having misaligned members.