Synthesis,Corrosion and Bioactivity Evaluation of Gelatin/Silicon and Magnesium Co-Doped Fluorapatite Nanocomposite Coating Applied on AZ31 Mg Alloy

In this study, a nano-composite composed of gelatin as the matrix and Si-Mg-FA nano-particles as an additive was deposited on the AZ31 Mg alloy via dip coating method. In addition, a coating composed of MgO, MgSiO₃ and Mg₂SiO₄ phases was applied on the AZ31 Mg alloy by anodizing process. It was found that the Nano-composite coating with a uniform distribution of nano-particles within the gelatin matrix with the thickness of about 9 µm was dense, crack-free and uniform whereas the surface of anodized layer was relatively coarse due to the presence of flaws and micro-cracks. The surface morphology, EDS analysis and FTIR results revealed the ability of nano-composite coated specimen to form the bone-like apatite. Due to the presence of aforementioned phases and special surface features, the anodized specimen possessed higher and lower corrosion resistance than uncoated and nano-composite coated specimens, respectively. The passive coating resistances (R_CT) of nano-composite, anodized specimen and uncoated samples were 2164, 1449 and 1024 Ω cm², respectively.     

Preparation of New Fibers on the Basis of Codeine Imprinted Polymer

A monolithic copolymer of methacrylic acid-ethylene glycol dimathacrylate as a fiber with 2 cm length and 0.3 mm diameter, containing codeine (CO) template was prepared through thermal radical co-polymerization procedure. This fiber is a robust recognition material capable of mimicking natural systems, combined with solid-phase micro-extraction (SPME) and gas chromatography/mass spectrometry for the extraction of trace CO from various street-drug samples. Effective experimental parameters such as Methacrylic Acid (MAA), Ethylene glycol dimethacrylate (EDMA), and CO proportions, nature, and dimension of mold, copolymerization time and temperature were optimized. Experimental studies such as scanning electron microscopy (SEM) reveal that highly homogenate fiber was achieved that can preciously be used for the above mentioned goals.     

Amine plant simulation by mass transfer and kinetic approach

A computer program has been developed for the simulation of gas-liquid absorption columns. The calculations are based on known assumptions and methods – the two-film theory. Mass and energy balances together with chemical reactions are carried out for each tray of the column. The results obtained from the simulation procedure are compared with those measured at industrial plants. For the items “rich solution temperature” and “calculated number of trays” the agreement of calculated and measured results are satisfactory. However, for the CO₂ and H₂S content of the streams only few comparisons could be made due to the fact that no measured values are available.     

Biomimetic Natural Killer Membrane Camouflaged Polymeric Nanoparticle for Targeted Bioimaging

In the present study, a biomimetic nanoconstruct (BNc) with a multimodal imaging system is engineered using tumor homing natural killer cell membrane (NKM), near‐infrared (NIR) fluorescent dye, and gadolinium (Gd) conjugate‐based magnetic resonance imaging contrast agent onto the surface of a polymeric nanoparticle. The engineered BNc is 110 ± 20 nm in size and showed successful retention of NKM proteins. The magnetic properties of the BNc are found to be tunable from 2.1 ± 0.17 to 5.3 ± 0.5 mm ^?1 s^?1 under 14.1 T, by adjusting the concentration of Gd‐lipid conjugate onto the surface of the BNc. Confocal imaging and cell sorting analysis reveal a distinguishable cellular interaction of the BNc with MCF‐7 cells in comparison to that of bare polymeric nanoparticles suggesting the tumor homing properties of NKM camouflage system. The in vitro cellular interaction results are further confirmed by in vivo NIR fluorescent tumor imaging and ex vivo MR imaging, respectively. Pharmacokinetics and biodistribution analysis of the BNc show longer circulation half‐life (≈9.5 h) and higher tumor accumulation (10% of injected dose) in MCF‐7 induced tumor‐bearing immunodeficient NU/NU nude mice. Owing to the proven immunosurveillance potential of NK‐cell in the field of immunotherapy, the BNc engineered herein would hold promises in the design consideration of nanomedicine engineering.     

Ethylene glycol biodegradation in microbial fuel cell

Ethylene glycol is an environmental pollutant, which exists in airport runoff and industrial waste. In this article, biodegradation of ethylene glycol in a two-chamber, batch-mode microbial fuel cell was investigated. Glucose and ethylene glycol at different concentrations were used as carbon and energy sources. Chemical oxygen demand removal in the range of 92–98% indicated that microbial fuel cell can be used for biodegradation of ethylene glycol. Ethylene glycol also improved power generation and the maximum power density was 5.72 mW/m² (137.32 mW/m³), with respect to the same glucose and ethylene glycol concentrations (500 ppm).     

An Approach for Enhancement of Saturation Magnetization in Cobalt Ferrite Nanoparticles by Incorporation of Terbium Cation

Cobalt ferrite nanoparticles were synthesized by a reverse micelle process. The optimum processing conditions required to fabricate nanocrystalline cobalt ferrite using a reverse micelle technique, especially the effect of water-to-surfactant molar ratios including w = 8, 10, 12, and 14, pH values in the range of 8 to 11, and annealing temperatures in the range of 400°C to 800°C, were evaluated. x-Ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), vibrating-sample magnetometry, and superconducting quantum interference device analysis were employed to evaluate the structural and magnetic properties of synthesized nanoparticles. XRD analysis confirms that the nanoparticles have a single-phase cubic spinel structure. The average particle size increases with increasing pH value and annealing temperature. Magnetization study reveals that the cobalt ferrite nanoparticles exhibit a superparamagnetic trend. The zero-field-cooled magnetization curves of cobalt ferrite nanoparticles indicated that, with an increase in pH value, the blocking temperature increases. Based on the obtained optimum parameters, terbium-substituted cobalt ferrite nanoparticles with composition CoFe_2?x Tb _x O₄ (x = 0.1 to 0.5) were prepared by a reverse micelle process. XRD and field-emission scanning electron microscopy evaluation demonstrated that single-phase spinel ferrites with narrow size distribution were obtained. Mössbauer spectroscopy was used to determine the site preference of terbium cation. The results confirm that terbium cations were distributed at tetrahedral and octahedral sites, but with a preference for the former. It was observed that, with an increase in terbium content, the saturation magnetization increases.     

Behavior of confined fluids in nanoslit pores: the normal pressure tensor

The aim of our research is to develop a theory, which can predict the behavior of confined fluids in nanoslit pores. The nanoslit pores studied in this work consist of two structureless and parallel walls in the xy plane located at z = 0 and z = H, in equilibrium with a bulk homogeneous fluid at the same temperature and at a given uniform bulk density. We have derived the following general equation for prediction of the normal pressure tensor P _zz of confined inhomogeneous fluids in nanoslit pores: