Vapor absorption by LiBr aqueous solution in vertical smooth tubes

Heat and mass transfer in a falling film vertical in-tube absorber was studied experimentally with LiBr aqueous solution. The presented results include the effect of solution flow rate, solution subcooling and cooling water temperature on the absorption in a smooth copper tube 16.05 mm I.D. and 400 mm long. The experimental data in the previous report for a 1200-mm-long tube was also re-examined and compared. It was demonstrated by the observation of the flow in the tube that the break down of the liquid film into rivulets leads to deterioration of heat and mass transfer at lower film Reynolds number or in longer tubes. An attempt to evaluate physically acceptable heat and mass transfer coefficients that are defined with estimated temperature and concentration at the vapor–liquid interface was also presented.     

Photoinduced Formation of Small Gold Particles in Silica Gels

AuCl⁻₄ ions in sol-gel-derived silica gels (Au/silica gels) were photoreduced by ultraviolet light irradiation at room temperature. In the presence of ethylene glycol in the silica gels, small Au particles were effectively formed by the irradiation. When the storage temperature of the gels was increased in the dark after the irradiation, the surface plas-mon resonance absorption peak of the Au particles was shifted to longer wavelengths, indicating that the Au particles became large. At a storage temperature below 9°C, Au particles could not be observed in the silica gels. The apparent activation energy of Au particle formation was estimated to be 17. 3 kcal·tmol⁻¹.     

Augmentation of boiling heat transfer from horizontal cylinder to liquid by movable particles

This paper presents a series of experimental results on a passive augmentation technique of boiling heat transfer by supplying solid particles in liquid. A cylindrical heater 0.88 mm in diameter is placed in saturated water, in which a lot of mobile particles exist, and the nucleate and film boiling heat transfer characteristics are measured. Particle materials used were alumina, glass, and porous alumina, and the diameter ranged from 0.3 mm to 2.5 mm. Particles are fluidized by the occurrence of boiling without any additive power, and the heat transfer is augmented. The maximum augmentation ratio obtained in this experiment reaches about ten times the heat transfer coefficient obtained in liquid alone. The augmentation ratio is mainly affected by the particle material, diameter, and the height of the particle bed set at no boiling condition. The augmentation mechanism is discussed on the basis of the experimental results. © 2001 Scripta Technica, Heat Trans Asian Res, 31(1): 28–41, 2002     

Breakdown characteristics of oil and paper insulation for a very fast transient voltage

This paper describes the dielectric breakdown characteristics of oil and oil‐impregnated paper for very fast transient (VFT) voltages. Blumlein circuits generate VFT voltages of 60 and 300 ns in a pulse width that simulates disconnecting switching surges in gas‐insulated switch gears. We measured the breakdown voltages of needle‐to‐plane, plane‐to‐plane oil gaps and several pieces of paper between plane electrodes for VFT and lightning impulse voltages. The measured data were formulated in V‐t characteristics and Weibull probability distributions. The inclination n of V‐t characteristics of insulating paper is 150, which is less than n = 13.7 of the plane‐to‐plane oil gap in the VFT time range. The shape parameters of Weibull distribution obtained in this study show that the scattering of breakdown voltages of paper is much less than that of oil. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 141(4): 16–24, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10043     

Phase diagrams calculated for Fe-rich Fe-Si-Co and Fe-Si-Al ordering alloy systems

Theoretical analysis based on the calculation of phase diagrams was employed for Fe-Si-Co and Fe-Si-Al ordering systems to clarify the necessity for the occurrence of phase separation in Fe-base ternary ordering systems. The free energy of Fe-base ternary ordering alloys where B2 and D0₃ ordered structures are formed is evaluated statistically using a pairwise interaction approximation up to second nearest neighbours, taking into account not only the atomic interaction but also the magnetic interaction, based on the Bragg-Williams-Gorsky model. The calculated phase diagrams are consistent with the experimentally obtained ones. The phase diagram calculation in this work is useful to predict the equilibrium states of the ternary ordering systems. The phase separation in ordering alloys is caused by the contribution of excess free energies due to ordering. The influences of ferromagnetism on the two-phase regions are also demonstrated.     

Functioning survival rate of fixtures and superstructures of osseointegrated implants: ten years of progress in Tokyo Dental College Hospital (second report)

Endoglucanase production was measured in culture filtrates of four species of Saccobolus growing in media containing glucose or crystalline cellulose as the only carbon sources. Enzyme activity was four to seven times higher in the presence of cellulose than glucose. S. saccoboloides showed maximal growth and enzyme production. The extracellular proteins secreted during growth on cellulose were separated by polyacrylamide gel electrophoresis and stained for proteins. A zymogram technique was used to visualize bands with endoglucanase activity. The four species showed different protein and isoenzyme patterns.     

Effect of immunosuppression on composition of quasispecies population of hepatitis C virus in patients with chronic hepatitis C coinfected with human immunodeficiency virus

BACKGROUND/AIMS: To study the effects of the immunosuppression caused by the reduction of CD4 activity on the composition of hepatitis C virus (HCV) populations, we analyzed the number of HCV quasispecies clones and the nucleotide diversity of the hypervariable region 1 (HVR1) of HCV in 37 patients with hemophilia with persistent HCV infection, with or without human immunodeficiency virus (HIV). METHODS: The numbers of HCV quasispecies clones were measured by fluorescence single-strand conformation polymorphism analysis. Direct sequencing was used to analyze the degree of diversity of HVR1. We compared these values according to coinfection with HIV, and CD4 counts of patients. RESULTS: There were no differences in either the number of HCV clones or the diversity between patients with and without HIV coinfection. In HIV coinfected patients the diversity decreased in association with the decrease in CD4 count while the number of HCV clones did not. The diversity of HVR1 was 3.64 +/- 5.03% in patients with a CD4 count < 50/microliters and 14.92 +/- 6.03% in patients with a CD4 count > or = 50/microliters; it was significantly lower in the former (p = 0.0002). CONCLUSIONS: A severe reduction in the CD4 count, which is considered to cause a decline in the activity of helper T-lymphocytes, induced changes in the composition of HCV populations; one or a few quasispecies clones are predominant in the HCV population in the serum of individual patients.     

Heat transfer enhancement by Marangoni convection in the NH3–H2O absorption process

The objectives of this paper are to quantify the effect of Marangini convection on the absorption performance for the ammonia–water absorption process, and to visualize Marangoni convection that is induced by adding a heat transfer additive, n-octanol. A real-time single-wavelength holographic interferometer is used for the visualization using a He–Ne gas laser. The interface temperature is always the highest due to the absorption heat release near the interface. It was found that the thermal boundary layer (TBL) increased faster than the diffusion boundary layer (DBL), and the DBL thickness increased by adding the heat transfer additive. At 5 s after absorption started, the DBL thickness for 5 mass% NH₃ without and with the heat transfer additive was 3.0 and 4.5 mm, respectively. Marangoni convection was observed near the interface only in the cases with heat transfer additive. The Marangoni convection was very strong just after the absorption started and it weakened as time elapsed. It was concluded that the absorption performance could be improved by increasing the absorption driving potential (x_vb−x_vi) and by increasing the heat transfer additive concentration. The absorption heat transfer was enhanced as high as 3.0–4.6 times by adding the heat transfer additive that generated Marangoni convection.     

Molecular basis of a hereditary type I protein S deficiency caused by a substitution of Cys for Arg474

The molecular basis for a hereditary type I protein S (PS) deficiency was investigated. DNA sequence analysis in the proband showed a novel missense mutation substituting Cys (TGT) for Arg474 (CGT) that is a highly conserved amino acid residue among the related proteins. This missense mutation cosegregated with the type I PS deficiency in this family. Transient expression studies showed that the secretion of the recombinant Cys-mutant PS was markedly decreased compared with that of the recombinant wild-type PS, reproducing the observed phenotype of type I deficiency. Stable expression and pulse-chase experiments demonstrated an intracellular degradation and an impaired secretion of the recombinant Cys-mutant PS. Furthermore, the substitution of Arg474 by Ala or Glu, but not by Lys, markedly reduced the secretion of the recombinant PS mutants in transient expression studies, suggesting that a positively charged basic amino acid might be needed at residue 474 and might play a key role in the protein structure and conformation of the sex hormone binding globulin-homology domain of the PS molecule. We postulate that the loss of the highly conserved Arg474 might be responsible for the type I PS deficiency inherited in this family.