Interconnected power systems with superconducting magnetic energy storage

The objective of this work is to discuss the concept of back‐to‐back interconnection systems with energy storage, especially with a Superconducting Magnetic Energy Storage (SMES) incorporated into a back‐to‐back DC link. In this case, each converter of the back‐to‐back system is used as a power conditioning system for the SMES coils. Since the AC–DC converter can be designed independently of the frequency of the power system, a two‐way switch is connected to the AC side of each converter. This two‐way switch can select the interconnected power systems. By using the two‐way switches, this system can provide the stored energy in the SMES system to each interconnected power system through two AC–DC converters. For instance, lower‐cost power of each power network can be stored through two converters during the off‐peak hours and made available for dispatch to each power network during periods of demand peak. Then this system increases the reliability of electric power networks and enables the economical operations depending on the power demand. This paper describes the unique operations of the back‐to‐back interconnection with SMES and discuses the optimal SMES configuration for a 300‐MW‐class back‐to‐back interconnection. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(2): 37–43, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20482     

Isolation, DNA sequence and regulation of a new cell division cycle gene from the yeast Saccharomyces cerevisiae

A new complementation group of temperature-sensitive mutants of the yeast Saccharomyces cerevisiae (ts26-1 and ts26-2) has been isolated and characterized. This mutation maps at 40.7 cM from arg8 and 48.9 cM from arg1 on the left arm of chromosome XV of yeast, providing that it is a newly identified gene. The dumbbell-shape terminal morphology of the mutant cells at the restrictive temperatures is a characteristic of mutants defective in DNA replication. To study the defect of macromolecule synthesis in the mutant cells, DNA, RNA, and protein synthesis were measured at both permissive and restrictive temperatures. The data suggest that the primary defect of this mutation is at the initiation step of DNA synthesis. The gene has been cloned from an S. cerevisiae genomic library by rescue of the conditional lethality of the mutants. It is present as a single copy in the haploid genome. DNA-RNA hybridization of the gene has identified 1 kb RNA, which is under cell-division-cycle control. DNA sequence analysis of the gene has identified an open reading frame capable of encoding a protein of molecular weight 25,055 (214 amino acids).     

Flexible supercapacitor-like actuator with carbide-derived carbon electrodes

Soft and flexible electric driven transducers based on carbide-derived carbon (CDC), 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIBF₄), polyvinylidenefluoride-co-hexafluoropropylene (PVdF(HFP)) are proposed, and electroactive performances of these materials are reported. By its nature, the synthesized device has two features when voltage is applied. Firstly, it is a bending-type electrochemical actuator. Besides the external change of shape, this device is also an electrochemical capacitor, providing opportunity to store a considerable amount of charge. Laminated actuators can work in open air at low voltages (1–3 V). Their operating frequency is between 5 × 10⁻³ – 1 × 10¹ Hz (it is from 5 millihertz to 200 hertz) and 10 Hz and the maximum strain calculated from transducer displacement is 0.6%. The gravimetric capacitance of CDC in actuator electrodes was found to be 119 F g⁻¹ at 1 mV s⁻¹ sweep rate of the applied triangle voltage. The effects of synthesis temperature of CDC and associated changes in the porosity and surface area on the actuator displacement are discussed. The results of this study demonstrated a great potential of CDC as an active material for actuator electrodes, especially in these applications where the performance of the actuator has to be standardized and highly predictable.     

Chemical Removal of CeO2 Segregated on the Surface of CeO2–ZrO2 Binary Oxides for Improvement of OSC

A chemical treatment to remove residual CeO₂ phase on CeO₂–ZrO₂ (CZ) solid solution was carried out. A CZ was treated by H₂O₂ for the reduction of Ce⁴⁺ to Ce³⁺ and then HNO₃ for the dissolution of Ce³⁺ compounds (H–CZ). H₂-TPR, TEM-EDX and XPS analyses revealed the removal of CeO₂ phase and the homogeneous distribution of Ce species. About 20% improvement in oxygen storage capacity (OSC) of H–CZ was confirmed at 773 K by the weight measurements under H₂/N₂ and air atmospheres, indicating that the HNO₃/H₂O₂ treatment was effective to avoid the deterioration of the OSC by segregated CeO₂ on the CZ binary oxides.     

Amino acid sensing by impedance of porous monolith-type ion exchanger

A biological and chemical sensor with rapid response at the microlevel is required for health and environmental monitoring. To develop a high-performance sensor, we use a porous monolith-type ion exchanger having three-dimensional acceptors to sense chemical substances. This porous monolith-type ion exchanger has an open-cellular structure with 5-50-μm diameter pores. The concentration of amino acids in the solution can be detected by measuring the impedance of the monolith-type ion exchanger. The novel ion exchanger has a high-exchange rate and high-electrical conductivity compared with that of the conventional ion-exchange resins. It is found that the impedance of the porous ion exchanger varies widely, depending on the amino acids such as glycine, asparatic acid, lysine, and phenylalanine. The impedance of anion exchanger had the highest value for phenylalanine with a benzene ring. OH-ion conduction is suppressed possibly due to the phenylalanine molecules stabilized by the hydrophobic interaction with the anion exchanger. In addition, we succeeded in sensing amino acid ions with concentration as low as 10⁻⁷ mol. The porous ion exchanger has the potential of a high-performance device for biological and chemical sensing.     

Fabrication of bilayered YSZ/SDC electrolyte film by electrophoretic deposition for reduced-temperature operating anode-supported SOFC

Bilayered Y₂O₃-stabilized ZrO₂ (YSZ)/Sm₂O₃-doped CeO₂ (SDC) electrolyte films were successfully fabricated on porous NiO–YSZ composite substrates by electrophoretic deposition (EPD) based on electrophoretic filtration followed by co-firing with the substrates. In EPD, positively charged YSZ and SDC powders were deposited directly on the substrates, layer by layer from ethanol-based suspensions. Delamination between YSZ and SDC films was avoided by reducing the SDC films’ thickness to ca. 1 μm. A single cell was constructed on the bilayered electrolyte films composed of ca. 4 μm-thick YSZ and ca. 1 μm-thick SDC films. As a cathode in the cell, La_0.6Sr_0.4Co_0.2Fe_0.8O_3−x (LSCF) was used. Maximum output power densities greater than 0.6 W cm⁻² were obtained at 700 °C for the bilayered YSZ/SDC electrolyte cells thus constructed.     

Development of a tube-type solar still equipped with heat accumulation for irrigation

A tube-type solar still is found to be suitable for use in desert irrigation. The effectiveness of a heat accumulator with regard to distillate productivity is experimentally and numerically verified. The heat accumulator consists of tube bundles immersed in wax in order to utilize the latent heat of wax. The dynamic response to stepwise variation of irradiative intensity verified the contribution of wax to an increase of productivity only when the phase change of wax occurred. The effective distillate productivity was found to be 294.3 g/m² during the cyclic stepwise change of irradiative intensity, from 200 to 600 W/m² and back. Velocity vectors driven by natural convection and temperature contours estimated by numerical simulation verified the effectiveness of the heat accumulator especially after peak solar intensity. The latent heat of wax effectively contributed to a 15% increase in total distillate productivity per day. The still can feasibly meet irrigation water supply demands above an irrigative threshold of 17 MJ/m² d.     

Characterization of the microbial community in an anaerobic ammonium-oxidizing biofilm cultured on a nonwoven biomass carrier

The enrichment and characterization of anaerobic ammonium-oxidizing biofilm cultures are ongoing in our laboratories. Biomass, with a predominately red color, demonstrating simultaneous removal of ammonium and nitrite under autotrophic and anoxic conditions, which is characteristic of anaerobic ammonium-oxidizing planctomycetes, was enriched and maintained for an extended period on a polyester nonwoven carrier. To investigate the bacterial composition of the mature biofilm community, 16S rDNA sequences were amplified by PCR and comparative analyses using DNA databases were conducted. Only one sequence had a notable similarity (92.2%) to that of the first discovered anaerobic ammonium-oxidizing planctomycete and lesser, yet significant, similarities to the 16S rDNA sequences of other recently reported anaerobic ammonium-oxidizing strains. The newly discovered strain (designated KSU-1) reported here was dominant among detectable members of the biofilm community. By fluorescence imaging, KSU-1 was shown to form spherical clusters wrapped in a thin layer of Zoogloea sp. Possible interactions and interdependencies of these two species are discussed with regard to the putative unculturability of the anaerobic ammonium-oxidizing planctomycetes.     

Improvement of anode oxidation reaction of a fuel cell using ammonium formate with Pt‐Ir catalysis

We have attempted to develop high‐performance and safe fuel cells by using ammonium formate as a solid (powder) fuel. This solid fuel has the potential of safer transportability than liquid fuels such as methanol from the viewpoint of toxicity and flammability. In order to make use of some of the advantages of ammonium formate, we investigated the oxidation characteristics of ammonium formate with respect to a Pt electrode. Cyclic voltammograms indicate that ammonium formate has high oxidation activity with respect to a Pt electrode. We have also found that the oxidation of ammonium formate can be improved by the addition of Ir to Pt catalysts. It is highly likely that ammonium formate will be useful as a solid (powder) fuel for polymer electrolyte membrane (PEM) fuel cells. This new fuel will promote the development of safe fuel cells for PEM. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 174(4): 45–50, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21043     

Experimental verification of a dynamic voltage restorer capable of significantly reducing energy‐storage element requirements

This paper deals with a dynamic voltage restorer (DVR) characterized by installing the shunt converter at the load side. The DVR can compensate for the load voltage when a voltage sag appears in the supply voltage. An existing DVR requires a large capacitor bank or other energy‐storage elements such as double‐layer capacitors or batteries. The DVR presented in this paper requires only a small DC capacitor intended for smoothing the DC‐link voltage. Moreover, three control methods for the series converter are compared and discussed to reduce the series‐converter rating, paying attention to the zero‐sequence voltages included in the supply voltage and the compensating voltage. Experimental results obtained from a 200‐V, 5‐kW laboratory system are shown to verify the viability of the system configuration and the control methods. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 165(3): 73–82, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20460