Reinforcement of hydroxyapatite by adding P2O5-CaO glasses with Na2O, K2O and MgO

Commercial hydroxyapatite was reinforced by adding small amounts (2 and 4 wt%) of P₂O₅-based glasses during its sintering process. The composites prepared had a chemical composition closely related to the mineral part of bone tissues in terms of trace elements usually detected, such as Na, K and Mg. X-ray diffraction analysis (XRD) showed that the glass reinforced-HA composites were composed of a HA matrix and variable amounts of tricalcium phosphate phase, depending on sintering temperature and glass composition. These composites were shown to have much higher biaxial bending strength than sintered HA, 107 MPa for Ha/2% of 35P₂O₅-35CaO-10Na₂O-10K₂O-10MgO glass composite and 28 MPa for sintered HA. The presence of -tricalcium phosphate in the microstructure of the composites is an important factor in the reinforcement process.This paper was accepted for publication after the 1995 Conference of the European Society of Biomaterials, Oporto. Portugal, 10–13 September.     

A two-stage stochastic programming model for the parallel machine scheduling problem with machine capacity

This paper proposes a two-stage stochastic programming model for the parallel machine scheduling problem where the objective is to determine the machines' capacities that maximize the expected net profit of on-time jobs when the due dates are uncertain. The stochastic model decomposes the problem into two stages: The first (FS) determines the optimal capacities of the machines whereas the second (SS) computes an estimate of the expected profit of the on-time jobs for given machines' capacities. For a given sample of due dates, SS reduces to the deterministic parallel weighted number of on-time jobs problem which can be solved using the efficient branch and bound of M’Hallah and Bulfin [16]. FS is tackled using a sample average approximation (SAA) sampling approach which iteratively solves the problem for a number of random samples of due dates. SAA converges to the optimum in the expected sense as the sample size increases. In this implementation, SAA applies a ranking and selection procedure to obtain a good estimate of the expected profit with a reduced number of random samples. Extensive computational experiments show the efficacy of the stochastic model.     

Experimental investigation on the mean drop size and drop size distribution in an L-shaped pulsed sieve-plate column

Vertical pulsed extraction columns cannot be employed in applications with height limitations. On the other hand, the horizontal extraction columns have low throughput, which affects their applicability in industrial applications. Therefore, there is a need to design a new type of extractors for such circumstances. In this paper, an experimental study on drop sizes has been implemented in a novel L-shaped pulsed sieve-plate extraction column in the absence and presence of mass transfer. Moreover, new correlations are developed for prediction of the mean drop size and size distribution using the log-normal probability density function.     

Investigation of Dissipation,Adsorption, Degradation,and Leaching of Triazophos Pesticide in Various Soils

This study concerns the investigation of dissipation, adsorption, and degradation of triazophos in different soils from Pakistan. These processes help in the disappearance of pesticide from the environment. Gas chromatography was used for dissipation and adsorption analysis while for degradation study mass spectrometer was used in addition of gas chromatography (GC-MS). The dissipation rate of triazophos in three different soils was 90% over 30 days with average half-life of 9.059 days. From dissipation study it was inferred that rate is variable in each soil due to climatic changes, soil nature and soil-pesticide interactions. Adsorption experiment has revealed that the adsorption of this pesticide to soil follows the pseudo first order kinetic model with rate constant value of 0.479/h and Freundlich isotherm with adsorption capacity of 1.832 mol/g. Degradation study has displayed two major metabolites, one is phosphorothioic acid, S-[2-[(1-cyano-1-methylethyl) amino]-2-oxoethyl] O,O-diethyl ester at retention time of 9.136 and the other is sulfotep at 14.304 min. The leaching potential of triazophos was also calculated from its half-life and organic carbon content present in soil which was 1.688 representing it as non leacher pesticide.     

Reactor thermal behaviors under kinetics parameters variations in fast reactivity insertion

The influences of variations in some of the kinetics parameters affecting the reactivity insertion are considered in this study, it has been accomplished in order to acquire knowledge about the role that kinetic parameters play in prompt critical transients from the safety point of view. The kinetics parameters variations are limited to the effective delayed neutron fraction (β_eff) and the prompt neutron generation time (Λ). The reactor thermal behaviors under the variations in effective delayed neutron fraction and prompt neutron generation time included, the reactor power, maximum fuel temperature, maximum clad temperature, maximum coolant temperature and the mass flux variations at the hot channel. The analysis is done for a typical swimming pool, plate type research reactor with low enriched uranium. The scram system is disabled during the accidents simulations. Calculations were done using PARET code. As a result of simulations, it is concluded that, the reactor (ETRR2) thermal behavior is considerably more sensitive to the variation in the effective delayed neutron fraction than to the variation in prompt neutron generation time and the fast reactivity insertion in both cases causes a flow expansion and contraction at the hot channel exit. The amplitude of the oscillated flow is a qualitatively increases with the decrease in both β_eff and Λ.     

Magnetization Reversal in CsNiIICrIII(CN)6 Coordination Nanoparticles: Unravelling Surface Anisotropy and Dipolar Interaction Effects

CsNiCr(CN)₆ coordination nanoparticles with sizes ranging from 6 to 30 nm are highly diluted in an organic polymer matrix. Their static and dynamic magnetic behaviour allows unravelling of surface anisotropy and interparticle dipolar interaction effects. The single magnetic domain critical size is thus evaluated to be around 22 nm with a blocking temperature of 21 K (at ν = 1 Hz) and an effective energy barrier for the reversal of the magnetization of 426 K.     

Effect of drag-reducing polymers on horizontal oil–water flows

The effect of a drag-reducing polymer (DRP) in the water phase during horizontal oil–water flow was investigated in a 14 mm ID acrylic pipe. Oil (5.5 mPa s, 828 kg/m³) and a co-polymer (Magnafloc 1011) of polyacrylamide and sodium acrylate were used. Two polymer concentrations were tested, 20 ppm and 50 ppm, made from a 1000 ppm master solution. The results showed a strong effect of DRP on flow patterns. The presence of DRP extended the region of stratified flow and delayed transition to slug flow. The addition of the polymer clearly damped interfacial waves. Annular flow changed in all cases investigated to stratified or dual continuous flow, while slug flow changed in most cases to stratified flow. In the cases where the slug and bubble flow patterns still appeared after the addition of the polymer, the oil slugs and bubbles were seen to flow closer together than in the flow without the polymer. The DRP caused a decrease in pressure gradient and a maximum drag reduction of about 50% was found when the polymer was introduced into annular flow. The height of the interface and the water hold up increased with DRP. There were no large differences on pressure gradient and hold up between the two DRP concentrations. Using a two-fluid model it was found that the addition of the polymer results in a decrease in both the interfacial and the water wall shear stresses.     

Association of Sj?gren's syndrome with HLA-B8

HLA antigens were examined by microdroplet lymphocyte cytotoxicity in 31 patients with Sj?grens syndrome. Fifty percent of 22 Causcasian patients (7 of 17 females and 4 of 5 males) had HLA-B8, as compared to 21% of 1205 controls (P=0.002). The presence of HLA-B8 was not correlated with parotid salivary flow, keratoconjunctivitis sicca, or focus score. Because of its association with a number of autoimmune diseases, including Sj?gren's syndrome, it is suggested that HLA-B8 is genetically liked to an immune response gene(s) that predisposes the individual to autoimmune phenomena. The expression of autoimmunity may be determined by infectious or environmental factors.