CANDYBOTS: A New Generation of 3D-Printed Sugar-Based Transient Small-Scale Robots

Sugars are ubiquitous in food, and are among the main sources of energy for almost all forms of life. Sugars can also form structural building blocks such as cellulose in plants. Because of their inherent degradability and biocompatibility characteristics, sugars are compelling materials for transient devices. Here, an additive manufacturing approach for the production of magnetic sugar-based composites is introduced. First, it is shown that sugar-based 3D architectures can be 3D printed by selective laser sintering. This method enables not only the caramelization chemistry but also the mechanical properties of the sugar architectures to be adjusted by varying the laser energy. It is also demonstrated that mixtures of sugar and magnetic particles can be processed as 3D composites. As a proof of concept, a sugar-based millimeter-scale helical swimmer, which is capable of corkscrew motion in a solution with a viscosity comparable to those of biological fluids, is fabricated. The millirobot quickly dissolves in water, while being manipulated through magnetic fields. The present fabrication method can pave the way to a new generation of transient sugar-based small-scale robots for minimally invasive procedures. Due to their rapid dissolution, sugars can be used as an intermediate step for transporting swarms of particles to specific target locations.     

Development and study of fully biodegradable composite materials based on poly(butylene succinate) and hemp fibers or hemp shives

The use of natural fibers to reinforce polymers is an established practice, and biocomposites have gained an increased interest in areas such as automotive, construction, and agriculture. The purpose of the present work was the preparation and study of fully biodegradable (“green”) composite materials using poly(butylene succinate) (PBSu) as polymeric matrix and hemp fibers and shives as fillers. Composites containing 15, 30, 50, 60, and 70 wt% of fillers were prepared by melt mixing in a twin screw extruder. The composites were studied using Fourier transform infrared spectroscopy, X‐ray diffraction, and differential scanning calorimeter while the dispersion and interfacial adhesion were studied with scanning electron microscopy. From mechanical properties measurements, it was found that tensile and impact strength are both affected by the type and the amount of the used filler. The degree of crystallinity of PBSu was found to decrease by increasing the filler content, although that both fillers can act as nucleating agents. Finally, the degradation rate during enzymatic hydrolysis and soil burial increased in all biocomposites by increasing the filler content. PBSu/hemp shive composites showed higher biodegradation rates than PBSu/hemp fiber composites. POLYM. COMPOS., 37:407–421, 2016. © 2014 Society of Plastics Engineers     

3D‐Printed Soft Magnetoelectric Microswimmers for Delivery and Differentiation of Neuron‐Like Cells

Neurodegenerative diseases generally result in irreversible neuronal damage and neuronal death. Cell therapy shows promise as a potential treatment for these diseases. However, the therapeutic targeted delivery of these cells and the in situ provision of a suitable microenvironment for their differentiation into functional neuronal networks remain challenging. A highly integrated multifunctional soft helical microswimmer featuring targeted neuronal cell delivery, on‐demand localized wireless neuronal electrostimulation, and post‐delivery enzymatic degradation is introduced. The helical soft body of the microswimmer is fabricated by two‐photon lithography of the photocurable gelatin–methacryloyl (GelMA)‐based hydrogel. The helical body is then impregnated with composite multiferroic nanoparticles displaying magnetoelectric features (MENPs). While the soft GelMA hydrogel chassis supports the cell growth, and is degraded by enzymes secreted by cells, the MENPs allow for the magnetic transportation of the bioactive chassis, and act as magnetically mediated electrostimulators of neuron‐like cells. The unique combination of the materials makes these microswimmers highly integrated devices that fulfill several requirements for their future translation to clinical applications, such as cargo delivery, cell stimulation, and biodegradability. The authors envision that these devices will inspire new avenues for targeted cell therapies for traumatic injuries and diseases in the central nervous system.     

Properties of poly(lactic acid)/montmorillonite/carbon nanotubes nanocomposites: determination of percolation threshold

Incorporation of rigid nanoparticles is the most effective means of improving polymer properties. Montmorillonite (MMT) and multi-walled carbon nanotubes (MWCNTs) are legendary in this field for their individual exceptional properties. A synergistic phenomenon is induced between these two particles when they are simultaneously incorporated into polymers. At a definite nanofillers concentration, called the percolation threshold, there is a sudden change in nanocomposite properties due to the formation of a 3D-structured network of the nanoparticles within the matrix. In this work, the properties of poly(lactic acid) (PLA) nanocomposites filled with different fractions of MMT/MWCNTs hybrid (0.5–2.0 wt%) were analyzed. In particular, the percolation threshold of the MMT/MWCNTs hybrid was uniquely identified by differential scanning calorimetry, thermogravimetric analysis and dynamic mechanical thermal analysis. The structural studies by X-ray diffraction and Fourier-transform infrared spectroscopy were also associated with the percolation threshold of MMT/MWCNTs in PLA. At 1.0 wt% MMT/MWCNTs concentration, the complete exfoliation of the particles was maintained, and the thermal characteristics such as glass transition, crystallization and melting temperatures reached their plateau at this hybrid concentration. Moreover, the thermal degradation and viscoelastic parameters showed their peak values at this critical point, which is correlated with the formation of the percolation threshold within the matrix. The morphological studies confirmed the homogeneous dispersion of MMT/MWCNTs in PLA up to a concentration of 1.0 wt%. At 2.0 wt% MMT/MWCNTs, few aggregations occurred in the PLA-based composite, confirming that the percolation threshold was formed at a lower concentration of MMT/MWCNTs nanoparticles.

     

Effect of ball milling on the mechanical properties and crystallization of graphene nanoplatelets reinforced short chain branched-polyethylene

Short-chain-branched-polyethylene (SCB-PE) is extensively used in domestic hot and cold piping systems. SCB-PE nanocomposites using graphene nanoplatelets (GNPs) as a filler, were prepared in this work. The effect of ball-milling as a premixing technique prior to melt-mixing, on the crystallization and the nanomechanical properties of the composites has been studied. Two sets of SCB-PE/GNPs nanocomposites with various filler loadings were prepared; one with and one without the ball-milling step. The dispersion of the filler was evaluated by optical microscopy while the crystallization process was studied using differential scanning calorimetry. The nonisothermal crystallization's experimental data were analyzed using various methods. The materials' nanomechanical behavior was investigated by conducting nanoindentation tests. A finite element analysis process was developed to extract the composites' stress–strain behavior. The composites prepared with ball-milling presented improved dispersion of GNPs in the SCB-PE matrix, which affected the crystallization, while nanoindentation tests showed significantly enhanced mechanical properties.     

MOFBOTS: Metal–Organic‐Framework‐Based Biomedical Microrobots

Motile metal?organic frameworks (MOFs) are potential candidates to serve as small‐scale robotic platforms for applications in environmental remediation, targeted drug delivery, or nanosurgery. Here, magnetic helical microstructures coated with a kind of zinc‐based MOF, zeolitic imidazole framework‐8 (ZIF‐8), with biocompatibility characteristics and pH‐responsive features, are successfully fabricated. Moreover, it is shown that this highly integrated multifunctional device can swim along predesigned tracks under the control of weak rotational magnetic fields. The proposed systems can achieve single‐cell targeting in a cell culture media and a controlled delivery of cargo payloads inside a complex microfluidic channel network. This new approach toward the fabrication of integrated multifunctional systems will open new avenues in soft microrobotics beyond current applications.     

New N-(2-carboxybenzyl)chitosan composite scaffolds containing nanoTiO2 or bioactive glass with enhanced cell proliferation for bone-tissue engineering applications

In the present study N-(2-carboxbenzyl)chitosan (CBCS) 3D macroporous hybrid scaffolds with interconnected pore system, containing 0.5, 2.5, and 5?wt% TiO₂ nanoparticles (nTiO₂) and 2.5?wt% Bioglass 45S5 (BG) have been synthesized using freeze-drying technique. Compressive strength values verified that the modification of chitosan combined with the presence of inorganic fillers can attribute significant mechanical stiffness to the scaffold. The in vitro biomineralization test confirmed that all samples were bioinert as mineral deposits were detected with X-ray diffractometry after incubation in SBF. Cytotoxicity and biocompatibility of all scaffolds were tested by using and Wharton’s jelly–derived mesenchymal stem cells (WJ-MSCs) and human embryonic kidney 293 (HEK 293) cell line. Metabolic activity, proliferation, migration, and attachment to the scaffolds were examined. Cells appeared to attach around the superficial pores and migrate in them. Cells also maintained their morphology, proliferated, and migrated across the scaffolds and showed consistent and proved compatibility.