Decay Rate Kinetics of Ozone Gas in Rice Grains

The present study was carried out to evaluate the effects of ozone on rice grains for the following three conditions: saturation time, decay rate, and half-life of ozone. Experiments were performed in different bed thicknesses (5 and 10 cm) and moisture content (11.4 and 14.2% wb) at atmospheric conditions. The lowest saturation time of ozone was 119 min, with the concentration of 516 ppm for rice grains ozonated at 5-cm bed thickness with 11.4% (wb) moisture content. The decay rate kinetics of ozone obtained were consistent with a first-order model. Regarding the half-life of ozone, the lowest value obtained was 6.78 min for rice grains ozonated at 10-cm bed thickness with 14.2% (wb) moisture content.     

Numerical Simulation and Validation of Ozone Concentration Profile in Green Gram (Vigna radiate) Bulks

The new fumigant ozone offers an alternative to contact insecticides such as phosphine and methyl bromide as a grain fumigant. This study was carried out to test the flow characteristics of ozone from points of release to the available concentration of ozone to kill pests at other areas along the storage bin. A mass transfer model which predicts ozone concentration as a function of time was applied along with continuity equation to simulate the ozone transfer in a storage bin. Ozone exchange rate based on grain bed thickness was taken into account and evaluated using the correlation developed during the experiment. The relative error between the experimental and predicted ozone concentration values for the entire bin geometry was less than 25.7%. Overall, the general trends of measured ozone concentration were compatible with the simulated ones.     

Application of system dynamics modelling for a sustainable manufacturing system of an Indian automotive component manufacturing organisation: a case study

Clean Technologies and Environmental Policy - Over the last few decades, the manufacturing industry has been a major contributor to pollution and consumes a greater portion of the world´s...     

Single-step synthesis of N-doped TiO2 by flame aerosol method and the effect of synthesis parameters

We have established a novel route for the synthesis of N-doped TiO₂ by adopting flame aerosol (FSP) technique and investigated the effect of water content on the physico-chemical properties of the as-synthesized nanoparticles. The key characteristics of the developed method are to modify the precursor solution in order to incorporate nitrogen atoms into the TiO₂ lattice without altering the FSP set-up. The reduction of the flame enthalpy resulting in N-incorporation into the TiO₂ and the N-doping can be greatly enhanced further by the addition of secondary N-source (urea). Our XRD results reveal a shift of the (101) plane anatase diffraction peak to lower angles in our N-doped TiO₂ compared to undoped TiO_2, which suggest the distortion and strain in the crystal lattice prompted by the incorporation of the nitrogen atoms. The growth or expansion of crystal lattice can be attributed to the larger atomic radius of respective nitrogen atoms (r?=?1.7 Å) compared to oxygen (r?=?1.40 Å). Our XPS and EDX spectroscopy results elucidate that the nitrogen was effectively doped into the crystal lattice of TiO₂ in our as-synthesized N-TiO₂ catalysts predominantly in the form of interstitial nitrogen (Ti?O?N). The nitrogen atoms incorporation into the crystal lattice of titania modifies the electronic band structure of TiO₂, resulting in a new mid-gap energy state N 2p band formed above O 2p valence band. This occurrence narrows the band gap of TiO₂ (from 3.12 to ～2.51?eV) in our N-doped TiO₂ and shifts the optical absorption to the visible region.

Copyright © 2018 American Association for Aerosol Research     

Reaction Kinetics of Ozone Gas in Green Gram (Vigna radiate)

This study was carried out to evaluate the reaction kinetics of ozone gas in different height (5 and 10 cm), moisture content (10.6 and 13.4% (d.b.)) and gas flow rate (2 and 4 L/min). The decomposition kinetics obtained was first-order model. As far as the half-life of ozone is considered, the highest value obtained was equivalent to 8.72 min for grains ozonated at 5 cm height, 10.6% (d.b.) moisture content and 2 L/min gas flow rate. In the process of ozone reaction rate in green gram grains, height (p < 0.01) and moisture content (p < 0.01) were found to be the key factor for the effectiveness of ozone fumigation.     

Effect of viscous dissipation on Cu‐water and Cu‐kerosene nanofluids of axisymmetric radiative squeezing flow

This paper analyzes the axisymmetric squeezing current phenomena of Cu‐water and Cu‐kerosene for two dimensional nanofluid between two parallel plates. The effects of thermal radiation with velocity slip are also enhancing the subject as well. The similarity approach has been adopted to obtain the ordinary differential equations from partial differential equations. The solution of these complex coupled nonlinear equations is obtained analytically using the variation parameter method. For the corroboration of the current result, we have matched with prior results in particular cases and concluded that both the results coincide with each other. Computations are obtained for velocity and temperature profiles for different pertinent parameters along with skin friction and Nusselt number and presented via graphs and tables.     

Novel continuous single-step synthesis of nitrogen-modified TiO2 by flame spray pyrolysis for photocatalytic degradation of phenol in visible light

A novel rapid and continuous process has developed for the synthesis of nitrogen-doped TiO₂ (N-TiO₂) with flame spray pyrolysis (FSP) method. The nitrogen incorporation into TiO₂ was achieved by a facile modification (addition of dilute nitric acid) in the precursor for the synthesis. The catalysts were characterized by X-ray diffraction, Raman spectroscopy, transmission electron microscopy, diffuse reflectance spectroscopy, and X-ray photoelectron spectroscopy. The doping of nitrogen into the TiO₂ was confirmed by X-ray photoelectron spectroscopy (XPS) and energy dispersive X-ray (EDX) spectroscopy. The UV–vis spectra of the modified catalysts (with primary N source) exhibited band-gap narrowing for 4N-TiO₂ with band gap energy of 2.89 eV, which may be due to the presence of nitrogen in TiO₂ structure. The introduction of secondary N-source (urea) into TiO₂ crystal lattice results in additional reduction of the band gap energy to 2.68 eV and shows a significant improvement of visible light absorption. The N-TiO₂ nanoparticles modified by using secondary N-source showed significant photocatalytic activity under visible light much higher than TiO₂. The higher activity is attributed to the synergetic interaction of nitrogen with the TiO₂ lattice. The lowering of the band-gap energy for the flame made N-doped TiO₂ materials implies that the nitrogen doping in TiO₂ by aerosol method is highly effective in extending the optical response of TiO₂ in the visible region. The nitrogen atomic percentage has increased monotonically (0.09%–0.15%) with the increase in primary nitrogen source (nitric acid), and significantly boosted to 0.97% when secondary nitrogen source (urea) was introduced. The highest rate of phenol degradation was obtained for catalysts with secondary N source due to increase in N content in the catalyst.     

Effect of Nickel as Dopant in Mn/TiO<Subscript>2</Subscript> Catalysts for the Low-Temperature Selective Reduction of NO with NH<Subscript>3</Subscript>

Nickel doped manganese oxide supported on titania materials were investigated for the low-temperature NH₃-SCR. For this purpose, a series of Ni modified Mn/TiO₂ catalysts were prepared and evaluated for the low-temperature SCR of NO with ammonia in the presence of excess oxygen. The catalytic performance of these materials was compared with respect to the nickel weight percentage in order to examine the correlation between physicochemical characteristics and reactivity of optimized materials. It was found that the 5% Mn–2% Ni/TiO₂ catalyst showed the highest activity and yielded 100% NO conversion at 200 °C. XRD results reveal highly dispersed manganese–nickel species on TiO₂ support for the Mn–Ni/TiO₂ catalysts. Our TPR data results suggested an increase in reducibility of manganese species in Mn–Ni/TiO₂ catalysts. The absence of the high-temperature (736 K) peak indicates that the dominant phase is MnO₂. This increase of reducibility and dominant MnO₂ phase seems to be the reason for the enhanced activity and time on stream patterns of nickel-promoted titania-supported manganese catalysts. BET results illustrate that the high NO conversion is strongly dependant on the specific surface area and pore volume of this catalyst. All the physicochemical techniques we used suggested that the composition of manganese and nickel oxides on the support surface is playing an important role for the enhancement of NO conversion and the prominent time on stream stability.     

Palladium(II)‐Catalyzed Sequential Aminopalladation and Oxidative Coupling with Acetylenes/Enones: Synthesis of Newly Substituted Quinolines from 2‐Aminophenyl Propargyl Alcohols

Palladium catalyzed conversion of 1‐(2‐aminophenyl)‐propargyl alcohols to 3‐alkynyl quinolines is realized via a cascade that involves aminopalladation, oxidative coupling with alkynes and dehydration. The method is shown to have a broad substrate scope with respect to propargyl alcohols as well as alkynes. Vinyl ketones as coupling partners in the same reaction afforded 3‐alkenyl quinolines with equal ease.