基于Patel-Teja状态方程的统一粘度模型(Ⅱ)应用于油气藏流体粘度的预测

基于(I)报根据pVT和Tμp图形的相似性和Patel-Teja状态方程建立的预测纯流体气、液相粘度的统一模型,通过引入常规的状态方程参数的混合规则,将其应用于二元轻烃混合物共计1894个数据点及模拟天然气高压粘度的预测,平均相对误差分别为13.78%和16.75%;应用于油藏原油和天然气高压粘度的预测,结果优于现有的有关油气藏流体粘度模型.     

Argon I Lines Produced in a Hollow Cathode Source, 332 nm to 5865 nm

We report precision measurements by Fourier transform spectroscopy of the vacuum wavenumber, line width, and relative signal strength of 928 lines in the Ar I spectrum. Wavelength in air and classification of the transition are supplied for each line. A comparison of our results with other precision measurements illustrates the sensitivity of Ar I wavelengths to conditions in the light source.     

用正电子湮没寿命技术研究塑性变形纯Ni的回复过程

本文用正电子湮没寿命方法研究了塑性变形镍(含0.01％杂质)的回复过程的特点及杂质在缺陷回复过程的作用和影响,计算了形变为10％的试样中的位错密度及形成空位团的有效空位浓度。     

固体硫在超临界/近临界酸性流体中的溶解度(Ⅰ)实验研究

建立了1套静态法测定难挥发物质(固体或液体)在超临界/近临界流体中溶解度的实验装置,并测定了固体硫在近临界硫化氢、超临界CO_2、CH_4及富硫化氢酸性气体混合物中的溶解度数据,取得了较好的结果.     

利用粉煤灰烧制陶粒的实验研究

利用哈密某电厂粉煤灰为主要原料,根据硅酸盐物理化学原理选择与该粉煤灰适应的各种物相成分,满足SiO2.Al2O3-CaO-Fe2O3等主要成分在高温下形成共熔物,达到利用该电厂粉煤灰烧制粉煤灰陶粒目的的研究,找出烧制粉煤灰陶粒的参数(烧成温度、烧成时间、温度带),各项性能技术指标满足GB2838.81要求的粉煤灰陶粒.并进行中试生产,配制轻质陶粒混凝土,为今后新疆地区粉煤灰陶粒的生产及利用提供实验依据.     

正电子湮没技术在聚合物中的应用

介绍正电子湮没技术的实验方法、谱图解析方法，概述近几年该技术在聚合物领域的应用和研究进展。实验结果证明，正电子湮没技术是一种先进的材料微观结构—自由体积的探测和表征技术。同时，提出该技术在聚合物研究中使用测量参数o—ps强度I3计算自由体积分数所存在的问题。     

THE CALCULATION OF CRITICAL PROPERTIES OF MIXTURES FROM EQUATIONS OF STATE

The rigorous critical state criteria based on Helmholtz free energy is used with equations of state fordirect calculation of critical properties(T_c,P_c and V_c)of 44 binary and 5 ternary systems.Special at-tention is paid to systems containing polar component(s)and the improvement in critical volume prediction.For extending this method to polar systems,the recently developed Cubic Chain-of-Rotators equation ofstate has been applied.As compared with SRK and PR equations of state,the improvement in V_c pre-diction is most impressive.     

Preparation and optical properties of Nb-NbN multilayer films as solar selective absorptive coatings

Based on the cermet double layer structure, Nb-NbN multi-layer films for solar selective coatings were deposited by direct current reactive magnetron sputtering. The Nb/Nb-NbN/Al2O3 trilayered structure was deposited on a stainless steel (SS) substrate by using a single niobium target. The expected components were adjusted by changing the gas flowing ratios of Ar: N2. The Al2O3 antireflective layer on the top of the film was produced by r. f. magnetron sputtering using Al2O3 ceramic target. A solar absorptivity of 0.94 and a normal emissivity of 0.16 at room temperature have been achieved for the coating. Thermal vacuum aging to the samples was carried out at 350 and 500 ℃ for 1 h. The results show a good thermal stability. Microstructure and its dependence on temperature of the Nb, NbN and Nb-NbN single layers were investigated, respectively.     

纳米晶Bi2Se3-Sb2Se3薄膜的SILAR法制备及表征

采用连续离子层吸附反应(SILAR)法,分别用含有Se2-,Bi3+和Sb3+的离子溶液作为独立的阴、阳离子前驱溶液,以载玻片为衬底,在室温下沉积出致密且具有镜面金属光泽的Bi2Se3-Sb2Se3薄膜材料.为了改善薄膜样品的结晶状态,对其进行了退火处理.用AFM观察了薄膜样品的表面形貌,用XRD分析了退火前后薄膜样品的结晶状态.结果表明薄膜样品经200℃较低温度下退火处理4 h以后,薄膜的结晶状态由无定形态转化为多晶态,其平均晶粒尺寸为30 nm～40 nm.