Occurrence of Lawn Care and Agricultural Pesticides in the Don River and Humber River Watersheds (1998–2002)

Between 1998 and 2002, surface water samples were collected from several sites in the Don River and Humber River watersheds, both tributaries to Lake Ontario, and analyzed for a variety of pesticides, including those used for urban lawn care. Analyses included 152 pesticide active ingredients and eight metabolites. Samples were collected during base flow periods (i.e., dry events) and rainfall events (i.e., wet events). The objectives of the study were to determine which pesticides were detectable, whether there was a difference in the detection frequency between the two watersheds and between upstream and downstream in each river, and whether precipitation influenced the frequency of detection. Eleven pesticides and one metabolite were detected in surface waters of the Don and Humber rivers or their tributaries, with approximately 72% of samples containing at least one pesticide attributable to lawn care use. The pesticides and pesticide metabolite detected in this study included 2,4-D, atrazine, bromacil, carbofuran, chlorpyrifos, cypermethrin, diazinon, dicamba, MECOPROP, metolachlor, metribuzin, and an atrazine metabolite (des-ethyl atrazine). Four pesticides exceeded federal or provincial water quality guidelines/objectives. Diazinon exceeded the provincial water quality objective in 28% of the samples taken. For the three other pesticides (atrazine, carbofuran and chlorpyrifos) exceedance of a water quality criteria occurred in less than 1% of the samples.     

10Gbit/S以太网,RPR和MPLS协同工作:城域网的未来

随着数据业务的发展,目前在城域网领域出现了3种很有希望的新技术:MPLS(多协议标记交换)、10 Gbit/s以太网和弹性分组环(RPR).这三种技术都各自有着自己的特点和优点,然而仅仅采用某一项技术并不能解决网络中的全部问题,将这三种技术综合应用就成为一种必要,本文将简要分析这几种技术,及其它们综合起来协同工作的必要性和现实意义.     

Development of composite tissue scaffolds containing naturally sourced mircoporous hydroxyapatite

The aims of this work were to investigate the conversion of a marine alga into hydroxyapatite (HA), and furthermore to design a composite bone tissue engineering scaffold comprising the synthesised HA within a porous bioresorbable polymer. The marine alga, Phymatolithon calcareum, which exhibits a calcium carbonate honeycomb structure, with a natural architecture of interconnecting permeable pores (microporosity 4–11 μm), provided the initial raw material for this study. The objective was to convert the alga into hydroxyapatite while maintaining its porous morphology using a sequential pyrolysis and chemical synthesis processes. Semi-quantitative XRD analysis of the post-hydrothermal material (pyrolised at 700–750 °C), indicated that the calcium phosphate (CaP) ceramic most likely consisted of a calcium carbonate macroporous lattice, with hydroxyapatite crystals on the surface of the macropores. Cell visibility (cytotoxicity) investigations of osteogenic cells were conducted on the CaP ceramic (i.e., the material post-hydrothermal analysis) which was found to be non-cytotoxic and displayed good biocompatibility when seeded with MG63 cells. Furthermore, a hot press scaffold fabrication technique was developed to produce a composite scaffold of CaP (derived from the marine alga) in a polycaprolactone (PCL) matrix. A salt leaching technique was further explored to introduce macroporosity to the structure (50–200 μm). Analysis indicated that the scaffold contained both micro/macroporosity and mechanical strength, considered necessary for bone tissue engineering applications.     

15 years of processing and dissemination of SPOT-VEGETATION products

Throughout the VEGETATION programme, the Flemish Institute for Technological Research (VITO) uninterruptedly hosted the prime user segment of both VEGETATION 1 and VEGETATION 2 multispectral instruments on board the Satellite Pour l’Observation de la Terre 4 (SPOT 4) and SPOT 5 satellites. Operational since the launch of SPOT 4 in March 1998, and foreseen to continue at least until the end of the SPOT 5 mission (anticipated in spring 2014), this user segment comprises a processing facility (PF), actively receiving, processing, correcting, archiving, and distributing the VEGETATION data and derived added-value products. First and foremost, the VEGETATION programme has been serving the needs of operational users – both institutional and commercial – requesting data in near-real time. However, scientific and educational users too benefited significantly, in particular from VEGETATION’s unique time series of the Earth’s land cover, and more specifically the vegetation cover. Over the years, the centralized archive houses processed data covering the equivalent of 11,000 times the Earth’s surface, and delivered more than 50 terapixels to around 10.000 users. As such, VEGETATION’s mission is a prime example of what Europe wants to achieve through the Global Monitoring for Environment and Security (GMES) initiative: truly operational services providing reliable and up-to-date information.

This article describes the processing facility, the way the data and products are archived, the different dissemination channels as well as the data policy adopted and the users served. One of the recent evolutions, the development of an entirely new product distribution facility (PDF), implemented as part of the Project for On-Board Autonomy – Vegetation (PROBA-V) user segment is discussed.     

Impacts of new technologies on media usage and social behaviour in domestic environments

Technological infrastructure at home is changing continuously and is becoming increasingly interconnected. Media devices, including the TV set, provide access to the Internet and offer manifold opportunities to consume media on demand. Additionally, personal devices, such as smartphones, also enable flexible consumption and sharing of media. Questions about how these technologies change the user's media usage and how these changes affect the social structure of a household, however, remain largely unanswered. In order to gain insight into the adoption of new technologies into daily routines, we explored these changes in respect of people's media usage in a qualitative long-term Living Lab study. We will present findings regarding personal routines, flexible integration of new devices into existing practices, influences on households as social systems and related issues in device access and collective use. We will highlight potentials and conflicts regarding device shifts and roles; restrictions in device access; social influences in the living room; and individual changes in media consumption.     

EVALUATION OF SURFACE FORCE-PORE FLOW AND MODIFIED SURFACE FORCE-PORE FLOW MODELS FOR REVERSE OSMOSIS TRANSPORT

The surface force-pore flow (SF-PF) model of reverse osmosis transport and the extended and modified form (the MD-SF-PF model) have been employed to predict the performance of four aromatic polyamide (FilmTec, FT30)reverse osmosis membranes. The evaluation is based on a comparison of model predictions with experimental data. Dilute sodium chloride-water solution experimental data were used to estimate model parameters. The models are then used to predict flux and separation at various operating pressures and concentrations. Membrane performance (i.e., separation and permeate flux) can be well predicted by the MD-SF-PF model while the SF-PF model predicts the performance for the sodium chloride system less satisfactorily.     

Adiabatic quantum optimization with qudits

Most realistic solid state devices considered as qubits are not true two-state systems. If the energy separation of the upper energy levels from the lowest two levels is not large, then these upper states may affect the evolution of the ground state over time and therefore cannot be neglected. In this work, we study the effect of energy levels beyond the lowest two energy levels on adiabatic quantum optimization in a device with a double-well potential as the basic logical element. We show that the extra levels can be modeled by adding additional ancilla qubits coupled to the original logical qubits, and that the presence of upper levels has no effect on the final ground state. We also study the influence of upper energy levels on the minimum gap for a set of 8-qubit spin glass instances.     

The role of latent and active failures in workplace slips, trips and falls: an information processing approach

The vast majority of the published workplace slips, trips and falls (STF) literature is exceedingly narrow in its focus and often ignores wider systems issues in workplace STF aetiology. There is little recognition within the published literature of the importance of latent failures or the upstream organisational and cultural contexts within which workplace STF occur. This is unfortunate, as a systems approach to workplace STF analysis, that is inclusive of latent design and work organisation factors that often shape worker behaviour patterns related to STF risk (e.g. rushing, risk taking), is fundamental to the development of effective prevention measures. The aims of this paper are to provide an understanding of workplace STF causation that is cognisant of the potential role of both active and latent failures in STF causation. The paper presents an ergonomics model for workplace STF analysis that highlights information processing in STF aetiology, the STF incident process and the interaction between latent and active failures in STF causation. The paper draws upon ergonomics research conducted in a range of occupational contexts to illustrate the key features of the model as it applies to workplace STF. Implications of the model for analysis and prevention of STF are discussed.     

Agent-based negotiation and decision making for dynamic supply chain formation

Modern businesses are facing the challenge of effectively coordinating their supply chains from upstream to downstream services. It is a complex problem to search, schedule, and coordinate a set of services from a large number of service resources under various constraints and uncertainties. Existing approaches to this problem have relied on complete information regarding service requirements and resources, without adequately addressing the dynamics and uncertainties of the environments. The real-world situations are complicated as a result of ambiguity in the requirements of the services, the uncertainty of solutions from service providers, and the interdependencies among the services to be composed. This paper investigates the complexity of supply chain formation and proposes an agent-mediated coordination approach. Each agent works as a broker for each service type, dedicated to selecting solutions for each service as well as interacting with other agents in refining the decision making to achieve compatibility among the solutions. The coordination among agents concerns decision making at strategic, tactical, and operational level. At the strategic level, agents communicate and negotiate for supply chain formation; at the tactical level, argumentation is used by agents to communicate and understand the preferences and constraints of each other; at the operational level, different strategies are used for selecting the preferences. Based on this approach, a prototype has been implemented with simulated experiments highlighting the effectiveness of the approach.