Operative complications of hernia repair in childhood

In a training center, 1,131 inguinal hernias were repaired in 1,000 consecutive patients in 6 years. The documents of these patients were reviewed retrospectively for surgical complications. A total of 38 complications were encountered in 35 patients, including wound infection (1.9%), recurrence (0.9%), tethered testis (0.3%), bladder injury (0.3%), was deferens injury (0.2%), iatrogenic orchiectomy (0.1%), and postoperative death. Most of them occurred in the early years of the clinic, and nearly one-half were technical in nature. Careful training, stressing the importance of gentle handling of the tissues, and meticulous dissection with emphasis on learning groin anatomy should reduce the incidence of such complications.     

Experimental investigation and prediction of bonding strength of Oriental beech (Fagus orientalis Lipsky) bonded with polyvinyl acetate adhesive

Adhesive bond strength of solid wood plays a key role in the efficient use of wood in a large number of engineering applications. In this study, the effects of amount of adhesive, pressing pressure, and pressing time on bonding strength of beech wood bonded with polyvinyl acetate adhesive were investigated and predicted by developing an artificial neural network (ANN) model. Experimental results have showed that bonding strength of wood samples increased generally by increasing amount of adhesive, pressing pressure, and pressing time. Besides, ANN analysis has yielded highly satisfactory results. The designed neural network model allows predicting the bonding strength of wood samples with mean absolute percentage error of 2.454% and correlation coefficient of 97.8% for testing phase. It is clear from the results that the model has a good learning and generalization ability. This model therefore can be used to predict bonding strength of beech samples bonded with polyvinyl acetate adhesive under given conditions. Consequently, this study provides beneficial insights for practitioners in terms of the safe and efficient use of wood as an engineering material in applications related to the strength of the bond between wood and adhesive.     

On the mode of action of eucaryotic initiation factor 1

A factor isolated from the human tonsillar ribosomal wash specifically stimulated the poly (U)-dependent binding of Phe-tRNA to 40S subunits at low Mg2+ concentration and without any requirement for GTP. The stimulated binding of Phe-tRNA to 40S particles was inhibited in proportion to added deacylated tRNA. The factor was inactivated by N-ethylmaleimide, but in the presence of 40S subunits a considerable protection was observed. 40S subunits, incubated with the factor and isolated by centrifugation, carried significant factor activity. The results imply that the human tonsillar factor, which shows a great functional analogy to the eucaryotic initiation factor 1 from other sources, exerts its effect by an initial interaction with the 40S subunit.     

The influence of retention hole and adhesive systems on the shear bond strengths of resin composite to amalgam

The aim of the study is to evaluate the influence of surface-treatment methods with and without the use of a retention hole on the shear bond strength of a resin composite adhered to amalgam using an adhesive system. Amalgam specimens were divided into six groups. Group 1 (Bur) specimens were roughened with a diamond bur, Group 2 (Al₂O₃) specimens were sandblasted with a 50?μm aluminum oxide powder, Group 3 (CoJet^®) specimens were sandblasted with 30?μm CoJet^® Sand, Group 4 (Bur?+?Rh) specimen surfaces were prepared with a retention hole 1?mm in diameter and 1?mm deep and roughened with a diamond bur, Group 5 (Al₂O₃?+?Rh) specimens were also prepared with a retention hole and sandblasted with 50?μm aluminum oxide powder, and Group 6 (CoJet^®?+?Rh) surfaces were prepared with a retention hole and sandblasted with 30?μm CoJet^® Sand. Resin composite cylinders were bonded onto the amalgam surfaces using Xeno^® IV, Optibond? All-In-One, Clearfil? SE Bond, Adper? Single Bond Plus, and Scotchbond? Multi-Purpose adhesive systems. In addition, silane (Monobond S) was used for Groups 5 and 6. The shear bond was determined and statistically analyzed using two-way analysis of variance and post hoc Tukey’s tests (p?≤?0.05). The surface treatment significantly affected the shear bond strengths of the adhesive systems. The shear bond strengths of Optibond? All-In-One (2.661?±?0.48?MPa) in Group 1 and Scotchbond Multi-Purpose (3.818?±?0.98) in Group 4 were significantly higher than those of the other adhesive systems. Silica coating of the amalgam surface significantly improved the shear bond strength of the resin composites. The addition of a retention hole on the amalgam affects the bonding strength of the composite adhesion.     

Effects of flash annealing and external magnetic field on magnetic properties of relatively high Nd content (37% by weight) NdFeB alloy

Journal of Materials Science: Materials in Electronics - Post modifications such as alloying element addition and/or heat treatment are applied to improve the magnetic properties of NdFeB permanent...     

Quantification of soybean oil adulteration in extra virgin olive oil using portable raman spectroscopy

Extra virgin olive oil is produced through either a cold press procedure or a centrifugation with no thermal and chemical treatments and it is considered as the best quality oil under the category of olive oils. The superior properties of olive oil due to its rich in phenolic and antioxidant content and its contribution to prevent several health problems has increased the demand for olive oil over the years. Consequently, it is nowadays sold at remarkably higher price than regular vegetable oils in the market. Unfortunately, extra virgin olive oil (EVOO) has been adulterated with other cheap oils due to potential high commercial profit. Even though, there are methods available to detect the adulteration in EVOO (such as chromatographic methods and PCR), alternative simpler and faster methods are being studied. In this study, performance of portable Raman spectroscopy to quantify soybean oil (SO) adulteration [up to 25?% (w/w)] in EVOO has been evaluated. Partial Least Square Regression (PLSR) calibration models were developed and both internally (using cross-validation, leave-one-out approach) and externally (using an independent sample set) validated. The model gave standard error of prediction (SEP) of 1.34?% (w/w) SO in EVOO and correlation coefficient of prediction (rPred) of 0.99. Additionally, the residual predictive deviation (RPD) value calculated for the model was found to be 5.71, indicating that the model was considered as “good” and could be used for routine analysis and quality control applications.