EFFECT OF DRYING METHOD ON MESOPOROSITY OF RESORCINOL-FORMALDEHYDE DRYGEL AND CARBON GEL

Resorcinol-formaldehyde hydrogels were synthesized by sol-gel polycondensation of resorcinol with formaldehyde in a slightly basic aqueous solution. RF cryogels, RF xerogels, and RF xerogels (MW gels) were respectively prepared from RF hydrogels by freeze drying, hot air drying, and microwave drying. Carbon cryogels, carbon xerogels and carbon MW gels were subsequently obtained by pyrolyzing RF drygels in an inert atmosphere. Freeze drying and microwave drying were effective to prepare mesoporous RF drygels and carbon gels. RF cryogels and carbon cryogels showed high mesoporosity over wide ranges of the molar ratio of resorcinol to catalyst (R/C) and the ratio of resorcinol to water (R/W) used in sol-gel polycondensation. Although RF xerogels had a few mesopores, carbon xerogels had no mesopores. RF MW gels and carbon MW gels showed mesoporosity if appropriate values of R/C and R/W were selected.     

Synthesis and antidiuretic activities of novel glycoconjugates of arginine-vasopressin

Arginine-vasopressin (AVP) was acylated with various acyl azides (2a-j) in pH 9.1 buffer to give AVP derivatives (11a-j) modified at the tyrosine side chain with a carbohydrate via a spacer arm. Glycoconjugates of AVP modified at the N-terminal amide (12a-e) were also synthesized from AVP and carboxylic acids (3a-e) using dicyclohexylcarbodiimide and 1-hydroxybenzotriazole as coupling agent. Analogues (11a-j) exhibited greater in vivo antidiuretic activity than AVP. AVP and glycoconjugates (12a-e) were stable in rat plasma. On the other hand, glycoconjugates (11a-i) were found to readily convert to AVP according to first order kinetics. Hence, 11a-j are considered to be prodrugs of AVP.     

Fluorogenic derivatization reagents suitable for isolation and identification of cysteine-containing proteins utilizing high-performance liquid chromatography-tandem mass spectrometry

The fluorogenic derivatization reagents with a positive charge, 4-(dimethylaminoethylaminosulfonyl)-7-chloro-2,1,3-benzoxadiazole (DAABD-Cl) and 7-chloro-2,1,3-benzoxadiazole-4-sulfonylaminoethyltrimethylammonium chloride (TAABD-Cl), are proposed for use in proteomics studies. Following derivatization of protein mixtures with these reagents, a series of standard processes of isolation, digestion, and identification of the proteins were performed utilizing high-performance liquid chromatography-fluorescence detection and tandem mass spectrometry with the probability-based protein identification algorithm. Both DAABD and TAABD derivatives were detected fluorometrically at the femtomole level and showed more than 100-fold improvement in sensitivity compared to the underivatized original compounds with an electrospray ionization ion trap mass spectrometer analysis. The modification of the MASCOT database search system memorized with the fragment information of a DAABD-attached Cys residue allowed the identification of the proteolytic peptide fragments of the derivatized bovine serum albumin (BSA) with an estimated 38% sequence coverage of BSA. Utilizing DAABD-Cl as a derivatization reagent, identification of several proteins was also possible in a soluble extract of Caenorhabditis elegans (10 microg of protein). Consequently, for identification of proteins in the complex matrixes of proteins, DAABD-Cl could be a more appropriate reagent than ammonium 7-fluoro-2,1,3-benzoxadiazole-4-sulfonate as reported previously.     

Amphiphilic Poly(Amino Acid) Nanoparticles Induce Size‐Dependent Dendritic Cell Maturation

Size‐regulated amphiphilic poly(amino acid) nanoparticles (NPs) composed of poly(γ‐glutamic acid) (γ‐PGA) and the hydrophobic amino acid derivative, L ‐phenylalanine ethyl ester (Phe) are prepared to evaluate the effects of particle size on dendritic cell (DC) uptake of NPs and their immune stimulatory activities as delivery carriers and adjuvants. The size of the Phe‐conjugated γ‐PGA NPs (γ‐PGA–Phe NPs) is easily controlled by regulating the aggregated γ‐PGA–Phe numbers. Each of the differently sized γ‐PGA–Phe NPs could efficiently encapsulate ovalbumin (OVA), and the amount of encapsulated OVA per milligram of NPs is almost the same despite the differences in size. The DC uptake of small NPs is lower than for the larger NPs, but the effect of DC activation by NPs is high in the small sizes. The DC activation is significantly affected by the size of the NPs, which suggests that not only the uptake process of the NPs, but also the surface interactions between the NPs and DCs, is important for the induction of DC maturation. The precisely size‐controllable γ‐PGA–Phe NPs have significant potential as an antigen carrier and vaccine adjuvant. These results should provide guidelines for adjuvant design in the development of an effective vaccine.     

1.3?m InGaAsP/InP distributed-feedback P-substrate partially inverted buried-heterostructure laser diode

A novel 1.3?m InGaAsP/lnP distributed-feedback buried-heterostructure laser diode on p-type InP substrate has been developed utilising a dopant diffusion technique. The laser has achieved a threshold current as low as 20 mA and high output power of 32 mW under CW and SLM operation.     

Validation of temporal BRDFs of paddy fields estimated from MODIS reflectance data

The effect of the bidirectional reflectance distribution function (BRDF) is one of the most important factors in correcting and validating the reflectance obtained from remotely sensed data. While the importance of BRDF has become widely recognized, bidirectional reflectance factor (BRF) data measured for correction and validation are insufficient because of the technical difficulty of the measurement. The primary objective of the present research is to estimate BRDF effects from Moderate Resolution Imaging Spectroradiometer (MODIS) data. Temporal ground-based BRDFs of rice paddy fields were estimated from ground measurements conducted in June and August 2002. MODIS-derived BRDFs obtained from MODIS reflectance data and ground-based BRDFs were estimated using the reciprocal form of the RossThick and LiSparse (RossThick-LiSparse-R) kernels, a semiempirical BRDF model adopted for the operational MODIS BRDF product. The MODIS-derived band 1 (620-680 nm) and band 2 (841-876 nm) BRDFs were compared with the ground-based BRDFs corresponding to the same waveband, respectively. The comparison results demonstrate that BRDFs of paddy fields change in accordance with paddy growth and that MODIS-derived BRDFs are closely related to ground-based BRDFs in most of the cases. It was also revealed that MODIS-derived BRDFs can be estimated to a high degree of accuracy when MODIS data necessary for the estimation are available.     

A monolithic1 x 10array of InGaAsP/InP photodiodes with small dark current and uniform responsivities

We fabricated a monolithic 1 × 10 array of InGaAsP/InP double-heterostructure photodiodes by liquid-phase epitaxy, which has highly uniform characteristics in breakdown voltages and responsivities and whose deviations in an array are ±1 percent and ±6 percent, respectively. The dark current of the elemental photodiode at low bias voltage, which is attributed mainly to the generation-recombination process in the depletion layer, is smaller than that of the germanium avalanche photodiode by one order at room temperature. The elemental photodiodes in the array have high quantum efficiency of more than 60 percent with SiOxfilm for antireflection in a wavelength range of1.0-1.2 mum, fast response time shorter than 1 ns, and very high cutoff frequency of about 800 MHz with the load resistance of 50 Ω.     

New approach to the frequency response analysis of an InGaAsavalanche photodiode

The frequency response of an avalanche photodiode has been calculated by solving the transport equations, taking the electric field profile into account. The relationship between the carrier concentration (Nb) in the multiplication layer and the frequency response has been obtained for the first time. This calculation has been carried out for a conventional In_0.53Ga_0.47As avalanche photodiode. The results explain well present experimental data. The saturation velocity of holes in InP is estimated to be 2×10⁶ cm/s. The upper limitation of the gain-bandwidth product is estimated to be 140 GHz at Nb=2×10¹⁷ cm^-3