Non-linear current–voltage characteristics related to native defects in SrTiO3 and ZnO bicrystals

SrTiO₃ and ZnO bicrystals with various types of boundaries were fabricated in order to examine their current–voltage characteristics across single grain boundaries. Their grain boundary structures were also investigated by high-resolution transmission electron microscopy. In Nb-doped SrTiO₃, electron transport behaviors depend on the type of boundaries. Random type boundaries exhibit highly non-linear current–voltage characteristics, while low angle boundaries show a slight non-linearity. On the contrary, undoped ZnO does not exhibit non-linear current–voltage characteristics in any type of boundaries including random ones. It is suggested that the differences observed in current–voltage properties between the two systems are mainly due to the difference in the accumulation behavior of acceptor-like native defects at grain boundaries. A clear non-linearity is obtained by means of Co-doping even for the highly coherent Σ1 boundary in a ZnO bicrystal. This is considered to result from the production of acceptor-like native defects by Co-doping.     

Ultrastructural immunogold localization of vimentin and S-100 protein in guinea pig pars tuberalis

All solid tumors must acquire a vascular stroma to grow beyond a minimal size. Vascular endothelial growth factor (VEGF) is a potent and specific angiogenic growth factor both in vitro and in vivo that may participate in the formation of the vascular tumor stroma. In the present study, we examined the expression of VEGF in the paraffin sections of 20 eyes harboring retinoblastoma or posterior uveal melanoma, but also in corresponding tumor cellines. By using in situ hybridization, we found that all but one of the retinoblastomas expressed VEGF mRNA. Particularly high expression was detected in areas of loosely packed tumor cells with prominent chromatin. By contrast, none of the posterior uveal melanomas expressed significant amounts of VEGF mRNA. Immunostaining with an antibody against VEGF confirmed that retinoblastomas, but not posterior uveal melanomas, also contained detectable VEGF protein. To further study the expression of VEGF in these tumor cells we performed Northern blotting on a retinoblastoma celline, Y79, and on an uveal melanoma celline, OM431. Both of these cellines expressed low levels of VEGF mRNA under normal culture conditions. However, when the cells were cultured under hypoxic conditions, a strong increase in VEGF mRNA could be seen in Y79 cells but not in OM431 cells. By using a bioassay, we also found that hypoxia stimulated the secretion of VEGF protein into the culture medium of Y79 cells. In conclusion, we have shown that VEGF mRNA and protein are expressed in retinoblastomas but not in posterior uveal melanomas. Moreover we have shown that VEGF is hypoxia-inducible in retinoblastoma cells. These results suggest that focal hypoxia may act as a stimulus for VEGF production in retinoblastomas, that in turn may contribute to tumor growth by stimulating the formation of a vascular stroma.     

Adsorption of urea,creatinine, and uric acid from three solution types using spherical activated carbon and its recyclability

In this paper, we propose that the urinary toxins from the wastewater be adsorbed on an adsorbent such as spherical activated carbon and the latter be regenerated by subjecting it to high temperatures to recycle activated carbon and also to recycle the water used in dialysis. We studied the adsorption of artificial waste dialysate, which is a mixed solution of urea, creatinine, and uric acid, and the separate solutions for each of these and found that their extents of adsorption onto the spherical activated carbon material were nearly identical. The amount of adsorption was approximately 1.4 mg·g^-1 for urea, 18 mg·g^-1 for creatinine, and 20 mg·g^-1 for uric acid. The urea, creatinine, and uric acid adsorbed onto the spherical activated carbon decomposed on heat treatment at 500℃, and the adsorption capacity of the spherical activated carbon was regenerated. Our study successfully demonstrated that the spherical activated carbon can be recycled in the waste dialysate treatment process.     

Corrosion of silicon nitride ceramics under hydrothermal conditions

Corrosion behaviour of Si₃N₄ ceramics containing Y₂O₃, Al₂O₃ and AIN as sintering aids was investigated under hydrothermal conditions at 200–300 C and saturated vapour pressures of water for 1–10 days. Hydrothermal corrosion resulted in the dissolution of the Si₃N₄ matrix and the formation of a product layer consisting of the original grain-boundary phases and hydrated silica. The dissolution rate of Si₃N₄ ceramics decreased with decreasing crystallinity of the grain-boundary phase. The dissolution rate could be adequately described by a parabolic plot in the initial stage of the reaction. The apparent activation energies were 83.5–108 kJ mol^–1, and the bending strength of the corroded samples decreased from 600 to 400 MPa in the initial stage of the reaction upto a weight loss of 0.004 g cm^–2, and then was almost constant up to a weight loss of 0.012 g cm^–2.     

Unravel four hairpins!

DNA machines consisting of consecutive hairpins, which we have previously described, have various potential applications in DNA computation. In the present study, a 288-base DNA machine containing four consecutive hairpins was successfully constructed by ligation and PCR. PAGE and fluorescence spectroscopy experiments verified that all four hairpins were successfully opened by four opener oligomers, and that hairpin opening was dependent on the proper openers added in the correct order. Quantitative analysis of the final results by fluorescence spectroscopy indicated that all four hairpins were open in about 1/4 to 1/3 of the DNA machines.     

The analysis of an adaptive workload balancing strategy in computing system resources management

An adaptive workload balancing scheme is analyzed. This scheme is intended to automatically dissolve the imbalance in resource utilization of computing systems and to bring about the proper balance between throughput and turnaround time. This is done by means of the invisible hand due to the bidding of priorities of resource use, with no contradiction between the flexible bid for each resource and the stable price for the entire service. The result of this analysis shows that this scheme would regulate those imbalances, and that it includes the load balancing policy of IBM OS/VS2-2 as a special case. Some considerations and methods on an actual implementation are also presented.This paper is a revised version of material which appeared as Research Report RC5072 of IBM Thomas J. Watson Research Center, Yorktown Heights, New York.On leave from the University of Electro-Communications, Chofu, Tokyo, Japan.     

Effect of the dilation caused by helium bubbles on edge dislocation motion in α-iron: molecular dynamics simulation

Various types of nanometric defects such as voids and helium (He) bubbles produced by high-energy neutron irradiations are known to degrade the mechanical properties of irradiated materials. In this study, we have evaluated the obstacle strength of He bubbles to the mobility of an edge dislocation in α-iron for 2 and 4 nm bubbles with He-to-vacancy (He/V) ratios ranging from 0 to 1 at 300 and 500 K, by molecular dynamics simulation. Results showed that as the He/V ratio increases, the obstacle strength needed for the release of a dislocation from the bubble becomes stronger up to a moderate He/V ratio (0.6 and 0.4 for 2 and 4 nm bubbles, respectively, at both temperatures), and a further increase in the He/V ratio leads to weakening of the obstacle strength. For He/V = 1, the obstacle strengths are 10–30% weaker than those at moderate He/V ratios depending on the bubble size and temperature. The extent of obstacle strength was found to be correlated with the dilation caused by He bubbles depending on the bubble size, He/V ratio, and temperature.     

Lower Irritation Potential of Laureth‐3 Carboxylate Amino Acid Salt

Sodium laureth sulfate and amino acid type surfactants have been categorized as low‐skin irritation chemicals based on results of previous skin irritation tests. However, detergent‐induced skin irritation still occurs. Detergents with a low‐skin irritation effect are required, since the number of cosmetics for sensitive skin has increased. Therefore, an in vitro method of testing the safety of cosmetics for sensitive skin is required. Skin irritation by anionic surfactants was investigated to determine the effect of laureth‐3 carboxylate (polyoxyethylene lauryl carboxymethyl ether) amino acid salt on skin irritation. In addition, sodium laureth sulfate and amino acid type surfactants, regarded as low‐irritation surfactants, were also tested for skin irritation. The skin irritation effect of laureth‐3 carboxylate lysine salt (Surfactant 1 ), sodium laureth sulfate (Surfactant 2 ), and sodium N‐lauroyl glutamate (Surfactant 3 ) were investigated using a reconstructed human cultured epidermal model, LabCyte EPI‐MODEL24 6D. Cell viabilities of cultured epidermal cells exposed to Surfactant 1 (5.0 % aq.), Surfactant 2 , and Surfactant 3 were 82.0, 45.0 and 19.1 %, respectively. There were significant differences in cell viability upon exposure to 5.0 % aqueous test solutions of the three test chemicals. The results of the current investigation indicate that Surfactant 1 has a low skin‐irritation effect.     

Pyrolysis of sugarcane bagasse pretreated with sulfuric acid

Pyrolysis is a promising technique for the recovery of useful gas, tar, and solid products from biomass waste. However, the low tar yields obtained from lignocellulosic biomass are a significant drawback. To enhance tar yields, sugarcane bagasse, which is the most abundant agricultural waste in Fiji, was pretreated at ambient temperature and atmospheric pressure using various sulfuric acid (H₂SO₄) concentrations. Here, the ether bonds of cellulose, hemicellulose, and lignin were partially hydrolyzed. The pretreated samples were then pyrolyzed at 500 °C, and it was confirmed that H₂SO₄-pretreatment disrupted the bagasse cell structure, with the thermogravimetry and differential thermogravimetry results confirming that decomposition occurred at lower temperatures after pretreatment. In addition, tar yields were significantly enhanced from 5.6 wt% to 13.4 wt% for the untreated and 3 M H₂SO₄-pretreated samples respectively. The main components detected in this tar product were levoglucosan, andcellulose-and hemicellulose-derived products, whose proportions were increased following pretreatment. Thus, our work demonstrates that dilute acid pretreatment enhances tar production from sugarcane bagasse due to the production of shorter chain components via the partial hydrolysis of ether bonds.     

Component-based robot system design for grasping tasks

The paper presents a robot system design with highly reusable components for a component-based robot system for manipulation tasks. The robot system is designed based on the analysis of manipulation tasks using a unified modeling language use case diagram. For a service robot with locomotion and manipulation mechanisms, reusability of robot system components is improved by adopting the proposed design. Our structure consists of scenario, task, robot information management server, data analyzer, sensor hardware controller, skill, and motion hardware controller on a component-based robot system. Based on the proposed robot system, we implemented a component-based robot system and subsequently realized a grasping motion by a service robot.