The principle and fundamental characteristics of brushless three-phase synchronous induction motor with two stators

Brushless three-phase synchronous motor involving a rotating ac exciter on the same shaft as the motor and with the windings linked through a shaft-mounted rectifier is widely used as medium and large capacity machines. However, the motor needs to fit with damping windings for self-starting outside of the field winding in the rotor and needs to equip discharge resistance with complex electronic device to dispose of electromagnetic force induced in the field winding at starting. Therefore, the rotor structure is very complex, and there are disadvantages, especially for the robust and highly reliable motor that is desired. To solve the problem found in traditional motors, the authors proposed a brushless three-phase synchronous induction motor with two stators and one wound rotor. This problem is solved because the proposed motor is of two-stators structure: the rotor winding operates as a secondary winding of induction motor at starting and as the field winding at synchronous operation. The motor can self-start as a wound-rotor induction motor without external secondary resistance. Therefore, discharge resistance is not necessary; the starting equipment is very simple and the rotor structure is robust. It is possible to start with high torque. In this paper, the basic constitution of the proposed motor and the principles of operation are described in detail. The experimental results at starting and pulling into synchronism are shown for confirming the principles of operation and the experimental and numerical results of the starting characteristics. The load ones and the generating ones are shown and then the practical use of the proposed motor is confirmed.     

A high resolution negative working resist,LMR-UV,for g- and i-line lithography

LMR-UV (“low molecular weight resist for uv lithography”), a naphthoquinone-diazide sulfonic acid ester of a novolak resin, is a negative working resist. The mechanism of insolubilization of LMR-UV is based on the facts that the naphthoquinone-diazide moiety is decomposed to indenecarboxylic acid (polar compound) by photolysis upon UV irradiation and that the irradiated resist film insolubilizes in a non-polar developer. LMR-UV reliably forms 0.6 μm lines and spaces over a reflective substrate with steps by using a g-line stepper having a 0.35 NA lens. 0.6 μm-wide aluminum patterns over topography are obtained by use of g-line exposure and reactive ion etching. By use of an i-line aligner (NA = 0.42), LMR-UV resolves 0.25 μm space patterns with overhang profiles. The profiles are due to the large absorption coefficient of 3.8 μm^?1. 0.3 μm wide aluminum patterns are formed by i-line exposure and lift-off metallization.     

The monoamine regulon including syntheses of arylsulfatase and monoamine oxidase in bacteria

Bacterial cells respond to monoamine compounds, such as tyramine, dopamine, octopamine, or norepinephrine, and induce the syntheses of tyramine oxidase encoded by tynA and monoamine oxidase encoded by maoA. These monoamine compounds also derepress the synthesis of atsA-specified arylsulfatase that is repressed by sulfur compounds. These complex mechanisms of regulons regulated by monoamine and sulfur compounds has been analyzed by cloning and characterization of genes that are involved in the repression and derepression of the synthesis of arylsulfatase. The atsA gene forms an operon with the atsB gene, which encodes an activator of the expression of atsA. The negative regulator gene for arylsulfatase was found to code for dihydrofolate reductase (folA). The maoA gene forms an operon with the maoC gene, which has similarity to a dehydrogenase involved in the tyramine metabolism. The moaF gene encoding a 30-kDa protein, which is induced by tyramine, also forms an operon with the moaE gene. Finally, the moaR gene, which is induced by monoamine, was found to play a central role in the positive regulation of the expression of the monoamine regulon (moa) including the atsBA, maoCA, moaEF, and tyn operons. The moaR expression is subject to autogenous regulation and to cAMP-CRP control. The MoaR protein has a helix-turn-helix motif in its C terminus. Thus, the MoaR protein probably regulates the operons by binding to the regulatory region of the moa regulon.     

Identification of osteopontin in human dental calculus matrix

Osteopontin is a prominent non-collagenous component of bone matrix, although it is expressed in several other tissues. Recently, osteopontin was reported to be involved in urinary stone formation and atherosclerotic lesions of the aorta, suggesting that it may be a key protein associated with these types of pathological mineralization. In this study, whether or not human dental calculus contains osteopontin was investigated by immunoblotting and immunohistochemical analyses. After extraction of calculus proteins with EDTA and separation of the proteins by electrophoresis, immunoblotting analysis revealed the presence of osteopontin. Two forms of osteopontin appeared at 61 and 68 kDa on 10% polyacrylamide gel and the proteins were digested with thrombin, a highly specific protease. Moreover, immunohistochemical analysis revealed that osteopontin was localized in dental calculus adherent to tooth roots. These findings indicate that osteopontin is, in fact, present in human dental calculus and may be involved in calculus formation as the stone matrix.     

Mechanical behaviour and formulation of stress-strain relation for non-linear viscoelastic cellulose nitrate under cyclic loadings

The cyclic deformations under various repeated stresses are quantitatively investigated using non-linear viscoelastic cellulose nitrate heated to 60° C. The non-elastic strain or creep-plastic strain is remarkably influenced by the repeated stress and the stress rate. The cyclic deformations corresponding to the repeated stress less than a certain stress level attain the saturated state called the shake down after some cycles. The stress-strain relations of the non-linear viscoelastic media in the loading and unloading processes are deduced from the invariant theory using an hypothesis of creep potential. The non-linear viscoelastic observations obtained on the cellulose nitrate at 60° C under cyclic loadings are found to fit the deduced relations for the loading and unloading processes independent of the repeated stress and the stress rate.     

Application of the solid polymer electrolyte (SPE) method to organic electrochemistry—III. Kolbe type reactions on Pt-SPE

The feasibility of a solid polymer electrolyte (SPE) method for Kolbe type reactions was investigated by using Pt-SPE composed with Nafion 415 and platinum. The Kolbe reaction of acetic acid proceeded effectively on one side and both sides Pt-SPE composites. The lower current efficiency was observed on the latter than on the former. Neat acetic acid could also be electrolysed on both sides SPE though the cell voltage was fairly high.A methanolic solution of monomethyl adipate was electrolysed to give dimethyl sebacate on both sides Pt-SPE according to the Brown-Walker reaction. The current efficiency and the terminal voltage increased with the concentration of monomethyl adipate. Pt-SPE behaved as an active electrode of a high roughness factor, eg about 6, for the Kolbe reaction of acetate.     

Effects of soaking soybeans in dilute acids on biologically active components

Soaking soybeans in dilute acids affected activities of lipoxygenase, trypsin inhibitor and urease. Effects of soaking time, acid concentration and soaking temperature were investigated. Lipoxygenase activity was completely eliminated by soaking in 0.3 M HC1 at either 23°C or 40°C for 8 hr. Less than 50% trypsin inhibitor remained and urease was inactivated to an acceptable level (0.04 ΔpH).     

The cluster of arachnoid diverticula in the occipital bone: report of two cases with literature review

The authors report two cases of multicentric osteolytic lesions in the occipital bone without any history of head trauma. The excisional biopsy of the first case revealed that the lesion was multicentric but a continuous cavity with the subarachnoid space through various sizes of dural defect, and the cavities were covered by arachnoid lining. Together with the previously reported similar 5 cases, the characteristic common feature is multicentric osteolytic lesions in the occipital bone at advanced age without marginal sclerosis. "The cluster of arachnoid diverticula in the occipital bone (CADOB)" is probably the most appropriate term for these non-traumatic lesions with the following characteristics: elderly patients, occipital bone, midline, multiple, intact outer table, nonsclerotic margin and without history of trauma. Operation may not be indicated because of its non-progressive and benign nature.     

Vortex chain size effect and negative resistance in pin-free superconducting films

We investigate the static and dynamic behavior of vortices in a pin-free superconductor. A diffraction pattern is observed in the critical currentJ _cvs. applied fieldH parallel to the surface of a granular Al film. When one vortex chain is formed in the film,J _cbecomes nearly equal to zero, which verifies that the sample is actually pin-free. An interaction between a radiofrequency current and moving vortices occurs, and theI–V curve shows peculiar nonlinear effects such as real negative resistance. The results are analogous to dc and ac Josephson effects.