Early therapy with interferon for acute hepatitis C acquired through a needlestick

Chinese hamster lung fibroblast V79 cells have been widely used in studies of DNA damage and DNA repair. Since the p53 gene is involved in normal responses to DNA damage, we have analyzed the molecular genetics and functional status of p53 in V79 cells and primary Chinese hamster embryonic fibroblast (CHEF) cells. The coding product of the p53 gene in CHEF cells was 76 and 75% homologous to human and mouse p53 respectively, and was 95% homologous to the Syrian hamster cells. The V79 p53 sequence contained two point mutations located within a presumed DNA binding domain, as compared with the CHEF cells. Additional immunocytochemical and molecular studies confirmed that the p53 protein in V79 cells was mutated and nonfunctional. Our results indicate that caution should be used in interpreting studies of DNA damage, DNA repair and apoptosis in V79 cells.     

Analysis of bone loss with aging and menopause--using digital image processing

To study bone loss relationships to aging and menopause, cross-sectional bone mass measurements by digital image processing (DIP method), and menopause information collected by questionnaire, were analyzed on 291 women who live in Tsukude village. The results are as follows. 1) The mean DIP values (sigma GS/D, MCI) by age-stratified groups decrease with age after menopause. The rate of bone loss in sigma GS/D is almost constant, but in MCI it increases with aging. 2) In 30-year old and 40-year old age groups, the frequency distribution of DIP values is symmetrical and bell-shaped. But after the fifties the distribution is asymmetrical, with the mode of distribution deviated toward low bone mass. The change of mode with aging is larger than that of mean. This fact suggests that change of mean bone mass substantially underestimates actual bone loss from aging. 3) The change of the mean DIP values stratified by years elapsed since menopause is not especially large at start of menopause but becomes almost constant after menopause. DIP values reflect the bone loss from the aging rather than from menopause, and are beneficial to the study of bone loss in elderly women.     

Intelligent tutoring system for electric circuit exercising

An intelligent tutoring system called Circuit Exerciser is described. The system is designed to help university students learn more about electric circuits. It can formulate drill problems, solve them, and infer mistakes in a student's answer. It can also provide helpful comments to the students on how the mistake was made. The system shows the circuit of the presented problem on graphic displays and is student-friendly. The system architecture, pedagogical cycle, and execution of the system are presented     

A 7 ns 1 Mb BiCMOS ECL SRAM with shift redundancy

A 7-Mb BiCMOS ECL (emitter coupled logic) SRAM was fabricated in a 0.8 μm BiCMOS process. An improved buffer with a high-level output of nearly V_CC is adopted to eliminate the DC current in the level converter circuit, and the PMOS transistor has a wide operating margin in the level converter. The configurable bit organization is realized by using a sense-amplifier switch circuit with no access degradation. A wired-OR demultiplexer for the ×1 output, having the same critical path as the ×4 output circuit, allows for the same access time between the two modes. The ×1 or ×4 mode is electrically selected by the external signal. A simplified programming redundancy technology, shift redundancy, is utilized. Address programming is performed by cutting only one fuse in the shift redundancy. The RAM operates at the ECL-10K level with an access time of 7 ns. and the power dissipation at 50 MHz is 600 mW for the × mode     

Dietary effect of a symmetrical triacylglycerol, 1,3-biseicosapentaenoyl-2-γ-linolenoyl glycerol, on fatty acid composition of guinea pigs

The dietary effect of 1,3-biseicosapentaenoyl-2-γ-linolenoyl glycerol (STG) on the fatty acid composition of guinea pigs was examined and compared with that of an eicosapentaenoic acid ethyl ester (EPA-F) and of a soybean oil (SBO) diet. In terms of content of plasma lipid, EPA-E had a greater hypolipidemic effect than STG. On the other hand, in terms of EPA incorporation, contents of EPA in liver lipid were almost the same in the STG and EPA-E groups. Considering that the amount of EPA administered in the EPA-E group was almost 1.5 times that of the STG group, FPA may be absorbed more effectively as the glycerol ester than as the ethyl ester in guinea pigs. In all the tissue lipids, the STG group had a higher unsaturation index (UI) than the EPA-E group even though there is a lower UI in the STG diet than the EPA-E diet. These results suggest that greater amounts of desaturase products as a whole were synthesized in the STG group than in the other two groups. The dihomo-γ-linolenic acid/arachidonic acid (DGLA/AA) ratio in plasma total lipids in the STG group was 3.5 times that of SBO group, and the DGLA/AA ratio in the EPA-E group was half that of the SBO group. In liver lipid, the ratios of DGLA/AA and EPA/AA in the STG group were 0.687 and 0.488 (phosphatidylcholine fraction) and 0.237 and 0.752 (phosphatidylethanolamine fraction), respectively. The ratio of DGLA/AA as well as the high EPA/AA ratio obtained in the present study with the STG diet may lead to physiological alterations, including enhanced synthesis of 1-and 3-series eicosanoids.     

Curvature continuous path generation for autonomous vehicle using B-spline curves

In this paper we introduce a roadmap algorithm for generating collision-free paths in terms of cubic B-spline curves for unmanned vehicles used in mining operations. The algorithm automatically generates collision-free paths that are curvature continuous with an upper bounded curvature and a small slope discontinuity of curvature at knots, when we are given the locations of the obstacles, the boundary geometry of the working area, positions and directions of the vehicle at the start, loading, and the goal points. Our algorithm also allows us to find a switch back point where the vehicle reverses its direction to enter the loading area. Examples are provided to demonstrate the effectiveness of the proposed algorithms.     

SOFL: a formal engineering methodology for industrial applications

Formal methods have yet to achieve wide industrial acceptance for several reasons. They are not well integrated into established industrial software processes, their application requires significant abstraction and mathematical skills, and existing tools do not satisfactorily support the entire formal software development process. We have proposed a language called SOFL (Structured-Object-based-formal Language) and a SOFL methodology for system development that attempts to address these problems using an integration of formal methods, structured methods and object oriented methodology. Construction of a system uses structured methods in requirements analysis and specifications, and an object based methodology during design and implementation stages, with formal methods applied throughout the development in a manner that best suits their capabilities. The paper describes the SOFL methodology, which introduces some substantial changes from current formal methods practice. A comprehensive, practical case study of an actual industrial Residential Suites Management System illustrates how SOFL is used     

Human behavior in a staircase during a total evacuation drill in a high‐rise building

Many studies have been conducted on the evacuation behavior on the staircases of buildings, but very little data are available for a situation with many occupants in a crowded high‐rise building. Therefore, this study investigated the evacuation behavior of a large number of evacuees on the staircase of a 25‐story high‐rise building. A total evacuation drill was conducted with 2088 evacuees, and the behavior of 1136 evacuees on the landings of the south staircase was recorded by a video recorder on the ceiling. The relationship between the density and speed of the evacuees on the landings was analyzed from the evacuation data for two situations: without and with merging in the stair flow. The evacuation stair flow in this drill had merging occupants entering from the floors, but no one entered from the lower floors during the latter period of the drill. Therefore, the flow during the latter period was treated as non‐merging flow, for which it was observed that, when the staircase was fully crowded, the density on the landings in the moving situation was different from that in the stopped situation. Moreover, the density on the landings was different from that on the treads. Furthermore, in the merging flow, a merging ratio of approximately 50:50 occurred during the congested evacuation. Copyright © 2016 John Wiley & Sons, Ltd.     

Experimental study of bubbly swirling flow in a vertical tube using ultrasonic velocity profiler (UVP) and wire mesh sensor (WMS)

Two-phase air-water bubbly swirling flow through a pipe is a complex turbulent flow and its prediction is still challenging. The present paper describes the experimental investigation of the air-water bubbly swirling flow in vertical co-current flow. Swirling flow is induced by a twisted tape in a 20 mm inner diameter pipe. The flow is investigated using Ultrasonic velocity profiler (UVP), which allows the measurement of liquid and gas velocities simultaneously. Furthermore, simultaneous measurement of void fraction is performed using Wire mesh sensor (WMS). The experimental results reveal that swirling flow has significant impact on bubbles’ distribution. In low liquid flow rate, the average bubble velocity is fairly uniform along the radial position and void fraction increases in the near wall region. However, increasing liquid flow rate at constant gas flow rate leads to increase in void fraction in the core region, this is mainly due to drift velocity which is affected by centrifugal force. Experimental findings and parametric trends based on the effects of swirling flow are summarized and discussed.     

Processing and 3D printing of SiCN polymer-derived ceramics

Preceramic polymer resins are attractive for the 3D printing of net-shaped ceramic components. Recently various processes have been demonstrated for 3D printing of polymer-derived ceramics (PDCs). Ultimately in these processes, the process outcomes strongly depend on the process parameters. In particular, for PDCs the ceramic density, and ceramic yield are affected by the catalyst concentration and cross-linking duration. Here, we use thermal analysis and FTIR to quantify the interrelation of the process parameters on the process outcome for polysilazanes and demonstrate 3D printing of PDC components based on the best-identified process parameters. The results of this work can be used as guidelines for future additive manufacturing of PDCs.