Process Intensification of Living Cationic Polymerization of Isobutylene by a Flow Reaction System

Increasing the reaction temperature of the living cationic polymerization of isobutylene is crucial for industrial production due to the cost of refrigeration. The reaction temperature increase was achieved with an accelerated reaction rate using a flow reaction system. The polymerization conditions, including the flow reactor design, were based on the results of kinetic studies. Utilizing a milli‐scale flow reactor, polyisobutylene, which has a narrow molecular weight distribution, was obtained within a considerably short residence time at a high temperature. Furthermore, it was confirmed that the value of M_w/M_n correlates with the product of the Reynolds number and the angle of collision.     

Metastable phase relation and phase equilibria in the Cr2O3-Fe2O3 system

In order to ascertain the metastable phase relation in the Cr₂O₃-Fe₂O₃ system, the existing phases were investigated by X-ray analysis using samples obtained by heating the coprecipitated powders for 1 h at 600–1000°C. There was a metastable two-phase region of Cr₂O₃-rich (CC) and Fe₂O₃-rich (FC) phases below about 940°C. Equilibrium state of 1:1 composition at 600–900°C was considered to be a single phase of the corundum solid solution. The metastable two-phase CC + FC region was suggested to appear probably due to the compositional inhomogeneity in the coprecipitated powders.     

Superconductivity in the tetragonal phase of La1.9Bi0.1CuO4+δ annealed under high oxygen pressure

We have investigated the relation between the crystal structure and superconductivity in La_1.9Bi_0.1CuO_4+δ , in which the phase separation observed in La₂CuO_4+δ is suppressed. A phase diagram in theT?δ plane is given for La_1.9Bi_0.1CuO_4+δ with excess oxygen. For very smallδ values, the crystal structure is orthorhombic, and an orthorhombic-tetragonal phase transition occurs markedly atδ ～ 0.03 in the measured temperature range between 13 and 293 K. Superconductivity is observed in the range of 0.04<δ<0.11. This is clear evidence thathigh-T _c superconductivity also appears in the tetragonal phase.     

Optimal production-inventory policy for make-to-order versus make-to-stock based on the M/Er/1 queuing model

This paper analyzes a multi-product production / inventory system where demands for each item arrive according to a Poisson process and the production time for each product has an Erlang distribution. The paper proposes an optimality condition that specifies whether each product should be produced make-to-stock or make-to-order. In the event a product should be produced make-to-stock, an approach for computing the optimal base-stock level is proposed. Numerical examples are given for illustrative purpose.     

Relatively immediate relaxant effects of cholera toxin on isolated rabbit blood vessels

A study was made on the relatively immediate relaxant effect of cholera toxin (CTX) on the isolated ear artery, thoracic aorta and saphenous vein of the rabbit. Both preparations of CTX, containing sodium azide (NaN3) and azide-free, showed no effect on the non-precontracted artery, but CTX containing NaN3 relaxed the moderately precontracted blood vessels with methoxamine promptly, i.e., with a time course of min order. However, the immediate relaxation produced by CTX containing NaN3 was attributed mainly to NaN3. Azide-free CTX, on the other hand, at 1-10 micrograms/ml gradually produced concentration-dependent relaxation of the precontracted vessels. The relaxant effects of CTX on the vessels were slow and long-lasting, i.e., with a time course of 10 min order. The relaxation induced by CTX was not influenced by the removal of endothelium nor by pretreatment with 10 microM indomethacin, 3 microM atropine or 3 microM propranolol. Activation of protein kinase C by a phorbol ester inhibited the relaxant effect of CTX. These results indicate that CTX relaxes the blood vessels by directly acting on the smooth muscles, without mediation by known endogenous relaxing factor, such as endothelium-derived relaxing factor (EDRF = NO) or prostaglandin I2 (prostacyclin) and by muscarinic receptor or beta-adrenoceptor.     

Anterior chamber inoculation of splenocytes without Fas/Fas-ligand interaction primes for a delayed-type hypersensitivity response rather than inducing anterior chamber-associated immune deviation

The inoculation of antigens into the anterior chamber (AC) of the eye induces an antigen-specific immune response that inhibits delayed-type hypersensitivity (DTH). This regulatory response is known as anterior chamber-associated immune deviation (ACAID). The ACAID response appears to be complex, as it can be elicited by a wide variety of soluble and cell-associated antigens, including foreign, self, tumor, and alloantigens. To evaluate the contribution of Fas/Fas ligand (FasL) interaction to the induction of ACAID to alloantigens, gld and lpr mutant mice were used in conjunction with normal C3H, MRL, and BALB/c mice. ACAID was induced by inoculation of non-irradiated splenocytes from donor mice into the AC of various recipients. After 1 week, recipients were primed intradermally with donor splenocytes. One week later DTH was measured by ear swelling. C3Hgld mutants lacking functional FasL did not develop ACAID after the AC inoculation of BALB/c splenocytes. Conversely, the AC inoculation sensitized these mutants. MRL/pr mutants, which lack Fas, developed ACAID following inoculation of BALB/c cells. AC inoculation of lpr splenocytes did not induce ACAID, but sensitized C3H recipients. Treatment of the AC inoculum with an anti-Fas antibody blocked ACAID induction in a transient manner, as the recipients developed ACAID later. These results show that interaction of the Fas and FasL is required to induce ACAID to allogeneic cells. In the absence of Fas expression on donor splenocytes, or FasL expression by the recipient, AC inoculation primes for a DTH response rather than inducing ACAID.     

Supramolecular Nanofibers from Collagen-Mimetic Peptides Bearing Various Aromatic Groups at N-Termini via Hierarchical Self-Assembly

Self-assembly of artificial peptides has been widely studied for constructing nanostructured materials, with numerous potential applications in the nanobiotechnology field. Herein, we report the synthesis and hierarchical self-assembly of collagen-mimetic peptides (CMPs) bearing various aromatic groups at the N-termini, including 2-naphthyl, 1-naphtyl, anthracenyl, and pyrenyl groups, into nanofibers. The CMPs (R-(GPO)_n: n > 4) formed a triple helix structure in water at 4 °C, as confirmed via CD analyses, and their conformations were more stable with increasing hydrophobicity of the terminal aromatic group and peptide chain length. The resulting pre-organized triple helical CMPs showed diverse self-assembly into highly ordered nanofibers, reflecting their slight differences in hydrophobic/hydrophilic balance and configuration of aromatic templates. TEM analysis demonstrated that 2Np-CMP_n (n = 6 and 7) and Py-CMP₆ provided well-developed natural collagen-like nanofibers and An-CMP_n (n = 5–7) self-assembled into rod-like micelle fibers. On the other hand, 2Np-CMP₅ and 1Np-CMP₆ were unable to form nanofibers under the same conditions. Furthermore, the Py-CMP₆ nanofiber was found to encapsulate a guest hydrophobic molecule, Nile red, and exhibited unique emission behavior based on the specific nanostructure. In addition to the ability of CMPs to bind small molecules, their controlled self-assembly enables their versatile utilization in drug delivery and wavelength-conversion nanomaterials.     

Effects of magnetic field and hydrostatic pressure on martensitic transformation

Effects of magnetic field and hydrostatic pressure on martensitic transformations in some ferrous and nonferrous alloys have been studied. The studies clarified the effects of magnetic field and hydrostatic pressure on martensitic transformation start temperature, magnetoelastic martensitic transformation, morphology of martensites and transformation kinetics of athermal and isothermal transformations. That is, transformation start temperatures of all the ferrous alloys examined increase with increasing magnetic field, but those of non-ferrous, such as Ti-Ni and Cu-Al-Ni shape memory alloys, are not affected. On the other hand, transformation start temperature decreases with increasing hydrostatic pressure in some ferrous alloys, but increases in Cu-Al-Ni alloys. The magnetic field and hydrostatic pressure dependences of the martensitic start temperature are in good agreement with those calculated by the equations proposed by our group. In the work on the Fe-Ni-Co-Ti alloy, we found that magnetoelastic martensitic transformation appear. In addition, several martensite plates grow nearly parallel to the direction of applied magnetic field in the specimen of an Fe-Ni alloy single crystal. Moreover, we found that the isothermal process in an Fe-Ni-Mn alloy changes to the athermal one under magnetic field and the athermal process changes to the isothermal one under hydrostatic pressure. Based on the facts, a phenomenological theory is constructed, which unifies the two transformation processes.     

New catalytic functions of Pd–Zn, Pd–Ga, Pd–In, Pt–Zn, Pt–Ga and Pt–In alloys in the conversions of methanol

Pd and Pt supported on ZnO, Ga₂O₃ and In₂O₃ exhibit high catalytic performance for the steam reforming of methanol, CH₃OH+H₂OCO₂+3HH₂, and the dehydrogenation of methanol to HCOOCH₃, 2CH₃OHHCOOCH₃+2HH₂. Combined results with temperature-programmed reduction (TPR) and XRD method revealed that Pd–Zn, Pd–Ga, Pd–In, Pt–Zn, Pt–Ga and Pt–In alloys were produced upon reduction. Over the catalysts having the alloy phase, the reactions proceeded selectively, whereas the catalysts having metallic phase exhibited poor selectivities.     

Gas transport properties of 6FDA-TAPOB hyperbranched polyimide membrane

Physical and gas transport properties of the hyperbranched polyimide prepared from a triamine, 1,3,5-tris(4-aminophenoxy)benzene (TAPOB), and a dianhydride, 4,4′-(hexafluoroisopropylidene) diphthalic anhydride (6FDA), were investigated and compared with those of linear-type polyimides with similar chemical structures prepared from diamines, 1,4-bis(4-aminophenoxy)benzene (TPEQ) or 1,3-bis(4-aminophenoxy)benzene (TPER), and 6FDA. 6FDA-TAPOB hyperbranched polyimide exhibited a good thermal stability as well as linear-type analogues. Fractional free volume (FFV) value of 6FDA-TAPOB was higher than those of the linear-type analogues, indicating looser packing of molecular chains attributed to the characteristic hyperbranched structure. It was found that increased resistance to the segmental mobility decreases the gas diffusivity of 6FDA-TAPOB, in spite of the higher FFV value. However, 6FDA-TAPOB exhibited considerably high gas solubility, resulting in high gas permeability. It was suggested that low segmental mobility and unique size and distribution of free volume holes arising from the characteristic hyperbranched structure of 6FDA-TAPOB provide effective O₂/N₂ selectivity. It is concluded that the 6FDA-TAPOB hyperbranched polyimide has relatively high permeability and O₂/N₂ selectivity, and is expected to apply to a high-performance gas separation membrane.