Fabrication of lotus-type porous carbon steel by the continuous zone melting method and its mechanical properties

A lotus-type porous carbon steel with cylindrical pores was fabricated by the continuous zone melting method in a pressurized mixture of hydrogen and helium gases. The porosity increases with increasing partial pressure of the hydrogen gas, while the pore diameter remains almost constant, independent of the pressure. The ultimate tensile strength of the specimen with cylindrical pores parallel to the tensile direction is lower than the estimated value, assuming that the strength is decreased in proportion to the decrease of the cross-sectional area of the specimen, while the yield strength is higher than the estimated value. The compressive yield strength is also higher than the estimated value. The increase in yield strength is considered to be due to precipitation strengthening. The tensile strength is increased by quenching and tempering, while the elongation decreases. Such mechanical properties are discussed in terms of the microstructural analysis.     

Simulation of Strength Distribution in Ground Ceramics by Incorporating Residual Stress Effect

Strength of ground ceramics may be affected by residual stress as well as surface flaws induced by grinding. Strength prediction for ground ceramics is convenient for mechanical design of ceramic components. In this article, a numerical procedure based on fracture mechanics was proposed to estimate strength distribution of ground ceramics by considering grinding-induced residual stress. Bending strength and residual stress of ground ceramics were measured for three grinding-conditions. By comparison of simulated results with experimental ones, it was revealed that strength characteristics in experiments were well simulated by using the proposed procedure.     

Feedback control of decoupled bending and torsional vibrations of flexible beams

In this article, we consider a flexible beam with a rigid body, of which the bending vibration and the torsional vibration are decoupled. Therefore we need two control motors to suppress the vibrations. Each set of dynamic equations is treated in the form of an appropriate Hilbert space. A stabilizing feedback control law of each rotation motor will be established on the basis of modal analysis. A set of experiments has been carried out, and the results demonstrate the effectiveness of the dynamic model and the proposed control law. © 1994 John Wiley & Sons, Inc.     

High-efficiency finishing process for metal mold by large-area electron beam irradiation

A new finishing process for metal molds by large-area electron beam (EB) irradiation is proposed in this study. In the large-area EB irradiation equipment used here, an EB with high-energy density is irradiated without focusing the beam, and so the EB with a maximum diameter of 60 mm can be used for melting or evaporating metal surface instantly. Experimental results show that the surface roughness decreases from 6 μmRz to less than 1 μmRz in just a few minutes under proper machining conditions. The corrosion resistance of metal mold surface also could be greatly improved by large-area EB irradiation. Furthermore, the surface roughness of tilting surface close to 90° could be well improved. Therefore, large-area EB irradiation method has a possibility to become a high-efficiency finishing process for metal molds.     

Detailed Measurements of Nuclear Spin Polarizations in a Single InAlAs Quantum Dot Through Overhauser Shift of Photoluminescence

We investigated optical pumping of nuclear spin polarizations in a single self-assembled In_0.75Al_0.25As/Al_0.3Ga_0.7As quantum dot. The nuclear spin polarization exhibits the abrupt jump and hysteresis in the excitation power dependence at a particular excitation polarization. Measurement of circular polarization rate of the photoluminescence reveals that the abrupt change of the nuclear spin polarization is created mainly by the spin flip-flop process between nuclei and an electron of a positive charged exciton in this single quantum dot. Model calculation explains well the experimentally observed bistable behavior in InAlAs quantum dot. By using this abrupt change, the sign and magnitude of electron and hole g-factors in z-direction are verified.      

Effect of Pressure on Intermediate Valence States in Cerium Kondo Compounds

Electrical resistance, thermal expansion, lattice constants of the intermediate valence materials, α-Ce and CeBe13, were measured at high pressure. It is found that the Grttneisen parameters of Kondo temperature TK are 13 and 42 for α-Ce and CeBe13, respectively, and it decreases with increasing pressure. The magnetoresistance of α-Ce shows H^2 dependence and its coefficient increases with pressure below 1 GPa, but becomes nearly constant above 1 GPa. The results indicate that the intermediate valence states are enhanced at high pressure indicating the enhancement of hybridization between the 4f electron and conduction band.     

Analysis of proliferative activity using anti-proliferating cell nuclear antigen antibody in gastric cancer tissue specimens obtained by endoscopic biopsy

BACKGROUND: Proliferative activities of tumors are thought to be prognostic features of malignant tumors, but their value as measured by proliferating cell nuclear antigen (PCNA) labeling remains unclear in gastric cancer. METHODS: PCNA labeling rates (LR) were quantified in 121 paraffin-embedded biopsy specimens from primary tumors by immunocytochemistry. RESULTS: Immunohistochemical analyses have demonstrated that PCNA presents an intense staining in the nuclei of tumor cells and mucous neck cells of gastric glands. The PCNA LR ranged from 12% to 79% (mean +/- standard deviation), and a significant correlation was found between bromodeoxyuridine labeling indices and PCNA LR: PCNA LR were closely associated with tumor size, serosal invasion, and nodal involvement. The patients with tumors with high PCNA LR (greater than 40%) were dead significantly earlier than were those with tumors with low PCNA LR: When the PCNA LR and all the clinicopathologic parameters were entered into a Cox regression model, PCNA LR emerged as an independent prognostic factor. CONCLUSION: These results indicate that PCNA LR may be a potentially useful prognostic factor for gastric cancer.     

Inhibitory effect of lead on the proliferation of cultured vascular endothelial cells

We investigated the effect of lead nitrate (0.5, 1.0, 2.0 or 5.0 microM) on the proliferation of cultured bovine aortic endothelial cells. After exposure to lead, the number of cells and the incorporation of [3H]thymidine into the acid-insoluble fraction of the cells were reduced in parallel in a concentration-dependent manner. Histologically, lead treatment resulted in a decrease in the cell number accompanied by a change in the cell shape from polygonal to spindle; however, no degenerative change was observed except in 5.0 microM lead-treated cells. Furthermore, stimulation of [3H]thymidine incorporation by either basic or acidic fibroblast growth factor was significantly reduced by lead. However, the leakage of lactate dehydrogenase into the medium from the cells, a marker of nonspecific cell damage, was not changed by lead. From these results, it was revealed that lead inhibits the proliferation of cultured vascular endothelial cells without nonspecific cell damage. Although lead does not destroy the monolayer of endothelial cells, the metal may exhibit its noxious effect in the repair process of the vascular endothelium.     

A novel method of suppressing the inrush current of transformers by using a series‐connected voltage‐source PWM converter

This paper proposes a novel method of suppressing the inrush current of transformers. A small‐rated voltage‐source PWM converter is connected in series to the transformers through a matching transformer. As the connected PWM converter serves as a resistor for the source current, no inrush phenomena occurs. The required rating of the PWM converter, which serves as the damping resistor for the inrush phenomena, is 1/400 that of the main transformers in single‐phase circuits. In three‐phase circuits, it is 1/900. The basic principle of the proposed method is discussed. Digital computer simulation is implemented to confirm the validity and excellent practicability of the proposed method using the PSCAD/EMTDC. A prototype experimental model is constructed and tested. The experimental results demonstrate that the proposed method can perfectly suppress the inrush phenomena. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 157(4): 56–65, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20174