Effects of Winding Attachment Positions on Output Characteristics of Flux‐Modulating Synchronous Machines

The flux‐modulating synchronous machine (FMSM) is a new type of multipole SM with nonoverlapping concentrated armature and field windings on the stator. This paper compares the output characteristics of two FMSMs through finite element analysis (FEA) and experiments. In both of the FMSMs, the attachment positions of the armature and field windings are swapped. To determine the reason for the discrepancies in their output characteristics, unsaturated inductances were calculated using a d‐‐q equivalent circuit. In addition, the calculated results of the inductances were confirmed through a visualization of the leakage fluxes using FEA. The results of the study show that the synchronous inductance can be reduced by attaching the armature winding to the air‐gap side of the stator teeth and that the reduction leads to an increase in output power.     

Correlation between motion of source bender element and feedback signal induced by self-monitoring

Since the introduction of bender element tests to soil testing, the reliability of the estimated travel time has been the most serious problem. The author has previously shown a potential solution whereby removing the response of the bender element subsystem from the whole response could dramatically improve the accuracy of the travel time estimation. In order to lay the foundation for estimating the response of the bender element subsystem, this paper examines the correlation between the displacements of the element and the induced feedback signals by employing a self-monitoring element. The response of the self-monitoring element is modeled as a transfer function involving two internal transfer functions that relate the input signals to the displacements and the displacements to the feedback signals, respectively. Using a laser displacement sensor, the displacements are directly measured through the entire surface and reveal the three-dimensional bending motion of the element oscillating in both longitudinal and width directions. The feedback signals are similar to, but inconsistent with, the tip displacements, and an attempt is made to correct the feedback signals. Finally, a conclusion is given on the potential for estimating the response of the bender element subsystem using the self-monitoring element.     

Non-axisymmetric buckling behaviour of elastic-plastic circular tubes subjected to a nosing operation

Theoretical investigations have been carried out to predict the non-axisymmetric buckling seen in the throat of circular elastic-plastic tubes subjected to a nosing operation along a frictionless conically shaped die. The buckling points and associated modes are determined by Hill's bifurcation theory in conjunction with a non-axisymmetric buckling mode. The results show that increasing the die semi-angle and the tube thickness or decreasing the material work-hardening rate are always beneficial to improve the buckling limit. The associated critical buckling mode number generally decreases as the tube thickness increases and does not depend drastically on the die semiangle nor on the hardening rate. The effect of the average r value is substantial and the buckling limit is improved when the r value reduces. Part of the present results predict well the results observed in existing experimental work.     

二垩英与资源回收-Ⅰ考虑到二垩英生成的资源与能量回收基础研究

目前在日本,存在大量工业垃圾,包括各种塑料制品,ASR(汽车破碎垃圾),含有毒PCB(多氯联苯)的110变压器和PVC(聚氯乙稀)制品等.而来自城市垃圾焚烧炉的废气含有大量能量.因此,在充分考虑环境、避免二垩英生成的同时,安全回收来自工业垃圾、城市和/或工业垃圾焚烧炉的资源和能量是个非常重要的课题,这也将对抑制CO2排放作出贡献.正确地阐明焚烧过程中二垩英的生成机理及详细研究含少量二垩英的焚烧废气在冷却过程中大量形成二垩英的临界温度是项很重要的工作.解决这个问题可有效实现资源和能量的回收.本报告介绍日本在二垩英排放方面目前采取的对策和存在的问题以及大阪大学为阻止二垩英生成所做的基础研究工作.     

Surgical treatment of metastatic lung tumors

To evaluate an association between Helicobacter pylori (H. pylori) infection and chronic atrophic gastritis (CAG), an established precursor of gastric cancer, we performed a cross-sectional study using IgG antibody against H. pylori and pepsinogens of blood donors in four prefectures in Japan. Although a geographic correlation between the age-adjusted prevalence rates for H. pylori infection and those for CAG was not seen, the age-adjusted odds ratios (OR) of H. pylori infection for CAG were high in each area (around five for men and from four to 12.6 for women). The association between them weakened with advancing age; the ORs in the youngest age group (16-29 yrs) and in the oldest age group (50-64 yrs) were 12.5 and 2.8 for men, and 11.5 and 5.2 for women, respectively. These findings suggest that H. pylori infection is strongly associated with CAG, while there are some other factors interacting in the development of CAG. A prospective cohort study in which CAG and H. pylori infection are taken into account will be necessary to assess the risks of gastric cancer.     

Necrotizing fasciitis of the face

Necrotizing fasciitis (NF) is a rapidly progressive soft tissue infection with high morbidity and mortality rates. Its occurrence in the head and neck region is uncommon, the majority of reported cases being limited to involvement of the neck, usually from infections of dental or pharyngeal origin. Involvement of the face from NF is rare; only 35 such cases have been reported in the literature since 1960. It is not only associated with a high mortality but can also result in severe disfigurement of the face, posing challenging reconstructive problems. Successful management of facial NF requires early diagnosis, prompt institution of broad spectrum antibiotics, aggressive surgical debridement to control the infection, and reconstruction of the resultant soft tissue defects. This report describes four additional cases of facial necrotizing fasciitis. One of the four patients died as a result of sepsis and multi-organ system failure. Two of the three surviving patients had significant facial disfigurement. A comprehensive review of the facial NF cases reported in the literature is also provided. Based on our experience with facial NF and the results of all previous case reports, the clinical manifestations, pathogenesis, and management of this disease are discussed.     

Reliability of Au bump––Cu direct interconnections fabricated by means of surface activated bonding method

As a room temperature bonding method, surface activated bonding (SAB) method has been introduced to be one of the most appropriate interconnection methods for the next generation of electronic packaging. Thus it is important to study the reliability of SAB interconnection in long term life test.In this paper, interconnections of Au bump and Cu film bonded by SAB method were performed in high temperature thermal aging test. Degradation of properties such as electrical resistance, shear strength of bump and interface microstructure during aging process were studied to investigate the failure mechanism of the interconnection. Intermetallic compound Cu₃Au was found formed at the interface during thermal aging, and it causes evolvement of the properties and failure mode of the interconnection changing in shear test. Results reveal that SAB is suitable for the interconnection between Au bump and Cu film and it is reliable in thermal reliability test.