Analysis of class D inverter with irregular driving patterns

This paper presents an analysis of Class D inverter when irregular driving patterns are given to the gate drive of the switch devices. The analysis has been carried out with focusing on the waveforms, harmonics, low-frequency components, output power, and equivalent dc resistance, which are numerically analyzed and discussed. Class D inverters with six different Q factors from 0.1 to 20 are analyzed about 2/sup 16/ driving patterns for each Q. Superior four models of the six inverters are built and tested in circuit experiments. The calculated waveforms are compared to the experimental results. Both of them are agreed well in time domain and frequency domain. Analytical results show a possibility of a novel control method with irregular driving patterns. In spite of discontinuous control, the output power or voltage can be strictly changed as if continuous using the selected driving patterns in some ranges.     

Fracture toughness of short carbon fibre reinforced thermoplastic polyimide

The fracture toughness testing of short fibre reinforced thermoplastic materials were performed. Materials tested were the polyimide resin and also that reinforced with 20 wt% or 30 wt% short carbon fibre. For introducing the initial crack, the tapping method, the sliding method and the bridge indentation method were examined. Among them, the sliding method was found to be effective for every case. The fracture tests were conducted by the three-point bending test with several loading rates. Stable crack growth was observed for the neat material while unstable fracture occurred for the reinforced materials. The critical values of the stress intensity factor at crack initiation were greater for the reinforced materials than for the neat resin. The fracture toughness of the 30 wt% reinforced material was independent of loading rate while that of 20 wt% reinforced material increased with loading rate. In order to investigate the fracture mechanisms, fractographic observations were also performed.     

Preparation and antibacterial activity of novel fluoroalkyl end-capped oligomers/silica nanocomposites-encapsulated low molecular biocides

Fluoroalkyl end-capped N-(1,1-dimethyl-3-oxobutyl)acrylamide oligomer [R_F-(DOBAA) _n -R_F] reacted with tetraethoxysilane (TEOS) and silica nanoparticles in the presence of low-molecular weight biocides such as hibitane, hinokitiol, and hinokioil under alkaline conditions to afford R_F-(DOBAA) _n -R_F/silica nanocomposites-encapsulated these biocides in excellent to moderate isolated yields. Fluoroalkyl end-capped N,N-dimethylacrylamide oligomer [R_F-(DMAA) _n -R_F] and acrylic acid oligomer [R_F-(ACA) _n -R_F]/silica nanocomposites-encapsulated hibitane were obtained under similar conditions. Dynamic light scattering measurements showed that the size of these fluorinated nanocomposites-encapsulated biocides thus obtained is nanometer size-controlled. Additionally, these fluorinated nanocomposites were shown to have a good dispersibility and stability in methanol and water. Of particular interest, these fluorinated nanocomposites-encapsulated biocides were found to have a good antibacterial activity against Staphylococcus aureus, and these nanocomposites were applied to the surface modification of traditional organic polymers such as poly(methyl methacrylate).     

Intramolecular triplet energy migration in poly(2-vinylnaphthalene) and poly(naphthylalkyl methacrylate)s in solid solution: Effects of side chain length

Summary The effect of side chain length on intramolecular triplet energy migration of naphthalene containing polymers was investigated by a delayed fluorescence (DF) spectroscopy for the solid solution of the polymers. The degree of triplet energy migration depends strongly on whether the chromophores are directly attached to the main chain or not.     

Temperature and pressure effects on supercritical CO2 extraction of tomato seed oil

Tomato seed oil was extracted with supercritical carbon dioxide in a semibatch-flow extractor within the temperature range 313–343 K and the pressure range 10.8–24.5MPa. The extraction rates increased with pressure, but decreased with temperature increase because of the variation in solvent density and resultant differences in oil solubility. The fatty acid composition of the extracted oil was similar to that of soybean oil.     

Intussusception caused by a carcinoma of the cecum during pregnancy: report of a case and review of the literature

Respiratory infections are the most common infection in children. They differ remarkably according to age, bacteria and viruses. Therefore a careful history of outbreak, age, former infections, involvement of surroundings, symptoms, etc are essential. The present study included 50 children, aged between 0.3 and 12 yrs, all treated ambulatorily. 21 received brodimoprim (B) and 29 erythromycin (E). Indications were: tonsillitis, bronchitis, otitis media, sinusitis and scarlet fever. Dosages were: B was given 10 mg/kg body weight (b.w.) initially followed by 5 mg/kg b.w., once-a-day. The duration of treatment varied between 4 and 14 days (mean 8.3 days). E was given 30.50 mg/kg b.w. 3 times per day; duration 4 to 14 days (mean 8.6 days). Overall results were: in group B:12 cures, 5 improvements, 3 failures; 1 not assessable. In group E: 20 cures, 8 improvements, 1 failure. Side effects: in group B: vomiting (1), skin reaction (2), discontinuation (2); in group E: skin reaction (1), diarrhea (5), diarrhea+vomiting (1); discontinuation (2). The differences in efficacy and tolerability in the two groups are not statistically significant. The improved compliance with a single versus t.i.d. dosages has to be taken into account.