Nanowire encapsulation with polymer for electrical isolation and enhanced optical properties

Light management and electrical isolation are essential for the majority of optoelectronic nanowire (NW) devices.Here,we present a cost-effective technique,based on vapor-phase deposition of parylene-C and subsequent annealing,that provides conformal encapsulation,anti-reflective coating,improved optical properties,and electrical insulation for GaAs nanowires.The process presented allows facile encapsulation and insulation that is suitable for any nanowire structure.In particular,the parylene-C encapsulation functions as an efficient antireflection coating for the nanowires,with reflectivity down to ＜1％ in the visible spectrum.Furthermore,the parylene-C coating increases photoluminescence intensity,suggesting improved light guiding to the NWs.Finally,based on this process,a NW LED was fabricated,which showed good diode performance and a clear electroluminescence signal.We believe the process can expand the fabrication possibilities and improve the performance of optoelectronic nanowire devices.     

Compressing Two-Dimensional Routing Tables

We consider an algorithmic problem that arises in the context of routing tables used by Internet routers. The Internet addressing scheme is hierarchical, where a group of hosts are identified by a prefix that is common to all the hosts in that group. Each host machine has a unique 32-bit address. Thus, all traffic between a source group s and a destination group d can be routed along a particular route c by maintaining a routing entry (s, d, c) at all intermediate routers, where s and d are binary bit strings. Many different routing tables can achieve the same routing behavior. In this paper we show how to compute the most compact routing table. In particular, we consider the following optimization problem: given a routing table D with N entries of the form (s, d, c) , determine a conflict-free routing table with fewest entries that has the same routing behavior as D. If the source and destination fields have up to w bits, and there are at most K different route values, then our algorithm runs in worst-case time O( NK w2) .     

The Role of Melodic and Temporal Cues in Perceiving Musical Meter.

A number of different cues allow listeners to perceive musical meter. Three experiments examined effects of melodic and temporal accents on perceived meter in excerpts from folk songs scored in 6/8 or 3/4 meter. Participants matched excerpts with 1 of 2 metrical drum accompaniments. Melodic accents included contour change, melodic leaps, registral extreme, melodic repetition, and harmonic rhythm. Two experiments with isochronous melodies showed that contour change and melodic repetition predicted judgments. For longer melodies in the 2nd experiment, variables predicted judgments best at the beginning of excerpts. The final experiment, with rhythmically varied melodies, showed that temporal accents, tempo, and contour change were the strongest predictors of meter. The authors' findings suggest that listeners combine multiple melodic and temporal features to perceive musical meter. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Contracting With Uncertain Level Of Trust

The paper investigates the impact of trust on market efficiency and bilateral contracts. We prove that a market in which agents are trusted to the degree they deserve to be trusted is as efficient as a market with complete trustworthiness. In other words, complete trustworthiness is not a necessary condition for market efficiency. We prove that distrust could significantly reduce market efficiency, and we show how to solve the problem by using appropriately designed multiagent contracts. The problem of trust is studied in the context of a bilateral negotiation game between a buyer and a seller. It is shown that if the seller's trust equals the buyer's trustworthiness, then the social welfare, the amount of trade, and the agents' utility functions are maximized. The paper also studies the efficiency of advance payment contracts as a tool for improving trustworthiness. It is proved that advance payment contracts maximize the social welfare and the amount of trade. Finally, the paper studies the problem of how to make agents truthfully reveal their level of trustworthiness. An incentive–compatible contract is defined, in which agents do not benefit from lying about their trustworthiness. The analysis and the solutions proposed in this paper could help agent designers avoid many market failures and produce efficient interaction mechanisms.     

Detection of bubbles as concentric circular arrangements

The paper proposes a method for the detection of bubble-like transparent objects in a liquid. The detection problem is non-trivial since bubble appearance varies considerably due to different lighting conditions causing contrast reversal and multiple interreflections. We formulate the problem as the detection of concentric circular arrangements (CCA). The CCAs are recovered in a hypothesize-optimize-verify framework. The hypothesis generation is based on sampling from the partially linked components of the non-maximum suppressed responses of oriented ridge filters, and is followed by the CCA parameter estimation. Parameter optimization is carried out by minimizing a novel cost-function. The performance was tested on gas dispersion images of pulp suspension and oil dispersion images. The mean error of gas/oil volume estimation was used as a performance criterion due to the fact that the main goal of the applications driving the research was the bubble volume estimation. The method achieved 28 and 13 % of gas and oil volume estimation errors correspondingly outperforming the OpenCV Circular Hough Transform in both cases and the WaldBoost detector in gas volume estimation.     

The effects of paints and moisture content on the indoor air emissions from pinewood (Pinus sylvestris) boards

The emissions of volatile organic compounds (VOCs) from building materials may significantly contribute to indoor air pollution, and VOCs have been associated with odor annoyance and adverse health effects. Wood materials together with coatings are commonly used indoors for furniture and large surfaces such as walls, floors, and ceilings. This leads to high surface-to-volume ratios, and therefore, these materials may participate remarkably to the VOC levels of indoor environment. We studied emissions of VOCs and carbonyl compounds from pinewood (Pinus sylvestris) boards of 10% and 16% moisture contents (MC) with three paints using small-scale test chambers (27 L). The emissions from uncoated pinewood and paints (on a glass substrate) were tested as references. The 28-day experiment showed that the VOC emissions from uncoated pinewood were lower from sample with 16% MC. Painted pinewood samples showed lower emissions compared to paints on glass substrate. Additionally, paints on 16% MC pinewood exhibited lower emissions than on drier 10% MC wood. The emissions from painted pinewood samples were dominated by paint-based compounds, but the share of wood-based compounds increased over time. However, we noticed differences between the paints, and wood-based emissions were clearly higher with the most permeable paint.     

Efficacy of 5-day parenteral versus intramammary benzylpenicillin for treatment of clinical mastitis caused by gram-positive bacteria susceptible to penicillin in vitro

The efficacy of parenteral (intramuscular) or intramammary (IMM) benzylpenicillin treatment for clinical mastitis caused by gram-positive bacteria susceptible to penicillin in vitro was investigated. Cows with clinical mastitis in 1 udder quarter were randomly placed into 2 treatment groups. The preliminary bacteriological diagnosis of intramammary infection (IMI) was based on on-farm culturing, and the bacteriological diagnoses were later confirmed by a quantitative PCR assay. Clinical mastitis caused by gram-positive bacteria susceptible to benzylpenicillin was treated with penicillin via either the parenteral route (20 mg/kg) or IMM route (600 mg) once per day for 5 d. The outcome of the treatment was evaluated 3 to 4 wk after the onset of the treatment. The affected quarter was examined to assess the clinical cure, and milk samples were collected from the affected quarter to determine the bacteriological cure and milk N-acetyl-β-d-glucosaminidase activity. The survival and the composite milk somatic cell counts of the treated cows were followed up for 6 and 3 mo after treatment, respectively. A total of 140 cows with clinical mastitis were included in the study, 61 being treated with benzylpenicillin parenterally and 79 via the IMM route. From all quarters treated, 108 of 140 (77.1%) were cured clinically and 77 of 140 (55.0%) were cured bacteriologically. The route of treatment did not significantly affect the outcome of the treatment; 80.3% of the quarters with parenteral treatment and 74.7% of the quarters with IMM treatment showed a clinical cure, and 54.1 and 55.7% a bacteriological cure, respectively. The milk N-acetyl-β-d-glucosaminidase activity was significantly lower in the quarters with a clinical or bacteriological cure than in the quarters with no cure. The 6-mo survival and the proportion of cows with composite milk somatic cell counts <200,000/mL among the treated cows during the 3-mo follow-up period did not significantly differ between the treatment groups. In conclusion, the outcome of either parenteral or IMM benzylpenicillin treatment of clinical mastitis caused by penicillin-susceptible bacteria was similar.     

Rigorous and approximate analysis of metallic gratings in soft X-ray and EUV regions

Abstract

In deep ultraviolet and soft X-ray regions the complex refractive indices of metals differ substantially from their values in the visible region of the spectrum. The implications of this fact are analysed for metallic gratings illuminated by electromagnetic fields with wavelengths ranging from soft X‐rays to near infrared, concentrating on short wavelengths. In particular, we study metal-stripe gratings (linear polarizers for visible light) by rigorous diffraction theory to determine the short-wavelength region in which a combination of the geometrical thin-element approximation and the theory of single-layer films can be applied. Then we study inductive grid filters for protection of X-ray detectors from infrared radiation in space applications.     

A Self-Calibrated Pipeline ADC with 200 MHz IF-Sampling Frontend

A 13-bit, 50-MS/s pipeline ADC with IF-sampling capability is presented. A high sampling linearity is obtained through the use of bootstrapped switches. A digital self-calibration algorithm with modified capacitor measurement scheme is employed to improve the accuracy of the first two pipeline stages. The prototype, implemented with a 0.35-m BiCMOS (SiGe) technology, shows a 76.5-dB SFDR at a 194.2-MHz signal frequency and dissipates 715 mW power from a 2.9-V supply.