ENVIRONMENTAL TOBACCO SMOKE REMOVAL CAPABILITY OF ACTIVATED CARBON

Removal of gaseous and vapor constituents of environmental tobacco smoke (ETS) by activated carbons in a packed bed arrangement was studied under dynamic conditions and was compared with that by silica gel and molecular sieve 13X. ETS is a mixture of sidestream smoke and exhaled mainstream smoke, and it consists of various organic and inorganic compounds, trace heavy metals, and particulate matters. Due to the complex nature of ETS-air mixture, its removal from indoors is a challenging task. For experimentation in a laboratory, the ETS was produced from a specially designed smoking apparatus that simulated the puffng of a cigarette by a person. Air containing ETS was passed through a bed containing about 25 grams of activated carbon at room temperature. The flow rate of air-ETS mixture through the bed was 4000 cm3/min. The relative humidity of the air was 50% and contained about 35 to 40 ppm of hydrocarbons as measured as methane-equivalent. The number of particles in the inlet air stream were in the range of 30,000 to 35,000 particles/cm3. About 60% of hydrocarbons present in ETS were removed at these operating conditions for a period of about 70 hours. Based on 15 adsorption and regeneration cycles, it was noted that the carbon bed did not loose its capacity for ETS significantly as indicated by the BET surface area and water adsorption data. At the beginning of an adsorption cycle, the carbon bed captured a significant number of particles. However, the bed rapidly lost its particle capture effciency as the experiment progressed. The number of particles in the outlet air stream was found to be the same as that of the inlet stream within five minutes.     

Miscibility and fracture toughness of thermoplastic polyurethane/poly(vinyl chloride)/nitrile rubber ternary blends with special reference to the blend composition

Ternary blends of thermoplastic polyurethane and a poly(vinyl chloride)/nitrile rubber blend were investigated in this work. The blends, with weight ratios of 100/0, 80/20, 40/60, 60/40, 80/20, and 0/100, were prepared via melt blending. Dynamic mechanical analysis showed that the blends with ratios of 20/80 and 80/20 were miscible, whereas the 40/60 and 60/40 blends were partially miscible. IR spectroscopy studies showed shifts in the peaks due to specific interactions in the blends. The blends showed degradation behavior between the blend components. The fracture toughness was investigated with the J‐integral by the locus method; the components and the miscible blends had good fracture toughness, whereas the other blends had lower toughness. Similar behavior was observed for the tensile properties. Scanning electron microscopy studies showed the morphological variations in the blends. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1763–1770, 2005     

Recent advances in CKD and ESRD: A literature update

The past year has seen interesting publications in the fields of chronic kidney disease and end stage renal disease. This review highlights some of these important papers and places their findings in the context of clinical care.     

Biocompatible antimicrobial cotton fibres for healthcare industries: a biogenic approach for synthesis of bio‐organic‐coated silver nanoparticles

Cotton fibres coated with biogenically fabricated silver nanoparticles (SNPs) are most sought material because of their enhanced activity and biocompatibility. After successful synthesis of SNPs on cotton fibres using leaf extract of Vitex negundo Linn, the fibres were studied using diffuse reflectance spectroscopy, scanning electron microscopy, nanoparticle tracking analysis, energy dispersive X‐ray, and inductively coupled plasma atomic emission spectrometry. The characterisation revealed uniformly distributed spherical agglomerates of SNPs having individual particle size around 50 nm with the deposition load of 423 μg of silver per gram of cotton. Antimicrobial assay of cotton–SNPs fibres showed effective performance against pathogenic bacteria and fungi. The method is biogenic, environmentally benign, rapid, and cost‐effective, producing highly biocompatible antimicrobial coating required for the healthcare industry.Inspec keywords: cotton, health care, nanoparticles, coatings, silver, fibres, nanofabrication, scanning electron microscopy, X‐ray chemical analysis, atomic emission spectroscopy, plasma applications, microorganisms, biotechnologyOther keywords: biocompatible antimicrobial cotton fibre coating, healthcare industry, bioorganic‐coated silver nanoparticle synthesis, biogenically fabricated silver nanoparticle, SNP, leaf extraction, Vitex negundo Linn, diffuse reflectance spectroscopy, scanning electron microscopy, nanoparticle tracking analysis, energy dispersive X‐ray spectrometry, inductively coupled plasma atomic emission spectrometry, uniformly distributed spherical agglomerate, antimicrobial assay, pathogenic bacteria, fungi, Ag     

Efficient resource allocation for genetic algorithm based multi-objective optimization with 1,000 simulations

This study pertains to practical use of the GA for industrial applications where only a limited number of simulations can be afforded. Specifically, an attempt is made to find an efficient allocation of the total simulation budget (population size and number of generations) for constrained multi-objective optimization. A study is conducted to seek improvements while restricting the number of simulations to 1,000. Parallelization is exploited using concurrent simulations for each GA generation on a HP quad-core cluster, and resulted in a significant time savings. Furthermore, the efficient distribution of computational effort to achieve the greatest improvement in performance was explored. Two analytical examples as well as an automotive crashworthiness simulation of a finite element model with 58,000 elements were used as test examples. Various population sizes and numbers of generations were tried while limiting the total number of simulations to 1,000. The optimization performance was compared with Monte-Carlo and space filling sampling methods. It was observed that using the GA, many feasible and trade-off solutions could be found. It is shown that allowing a large number of generations is beneficial to get good trade-off solutions. For the vehicle design, significant improvements in the performance were observed. This example also suggests that, for problems with a small feasible region, the number of feasible solutions can be significantly increased in the first few generations involving about 200 simulations.     

Express Virtual Channels with Capacitively Driven Global Links

Networks on chip must deliver high bandwidth at low latencies while keeping within a tight power envelope. Using express virtual channels for flow control improves energy-delay throughput by letting packets bypass intermediate routers, but EVCs have key limitations. Nochi (NoC with hybrid interconnect) overcomes these limitations by transporting data payloads and control information on separate planes, optimized for bandwidth and latency respectively.     

Polyaniline–CdS nanocomposites: effect of camphor sulfonic acid doping on structural, microstructural, optical and electrical properties

Nanocomposites of CdS nanocrystals with conducting polyaniline doped with camphor sulfonic acid (CSA) have been prepared by spin coating technique and investigated by X-ray diffraction, field emission scanning electron microscopy (FESEM), fourier transform infra red spectroscopy (FTIR), UV–visible spectroscopy and electrical transport method. The X-ray diffraction patterns showed broad peaks due to formation of nanoparticles of CdS in polyaniline matrix. FESEM showed that the transformation of morphology from agglomeration to nanopetals. The FTIR spectra confirmed the interaction between CSA and polyaniline (PANi)–CdS nanocomposite. The UV–visible spectrums revealed the enhancement of doping level for the PANi–CdS nanocomposites which is assigned to the existence of greater number of charges on the polymer backbone. DC electrical conductivity studies showed an increase in conductivity of PANi–CdS nanocomposites from 6.9?×?10^?6 to 3.14?×?10^?4 due to addition of CSA (10–50?%).