A 72-mW CMOS 802.11a direct conversion front-end with 3.5-dB NF and 200-kHz 1/f noise corner

A direct conversion 802.11a receiver front-end including a synthesizer with quadrature VCO has been integrated in a 0.13-/spl mu/m CMOS process. The chip has an active area of 1.8 mm/sup 2/ with the entire RF portion operated from 1.2 V and the low frequency portion operated from 2.5 V. Its key features are a current driven passive mixer with a low impedance load that achieves a low 1/f noise corner and an high I-Q accuracy quadrature VCO. Measured noise figure is 3.5 dB with an 1/f noise corner of 200 kHz, and an IIP3 of -2 dBm. The synthesizer DSB phase noise integrated over a 10 MHz band is less than -36 dBc while its I-Q phase unbalance is below 1 degree.     

Surgical treatment of aneurysms of the left ventricle. Immediate and long-term results. Apropos of a consecutive series of 121 cases

From 1978 to 1992, 121 cases of postinfarction left ventricular aneurysm (99 males, 22 females, mean age 60 years) were operated on. The authors insist on a high rate of clinical arhythmogenicity (31.4%) and associated mechanical complications (21%). 76% of patients were in functional NYHA class III or IV. Resection was performed in 90% of patients, plication in 10%. 58% underwent coronary artery bypass grafting (1.7 graft/patient), 16% encircling ventriculotomy, 8% mitral valve replacement and 13% closure of ventricular septal defect. Operative mortality was 14.9% (10% when other mechanical complications where excluded). 5-year survival is 67.9%. Late cardiac deaths are as follow: left ventricular failure (1.8% A/P), Sudden death (1.4% A/P), Myocardial infarction (0.6% A/P). 82% of survivals are in functional NYHA class I or II. Only functional class NYHA III or IV is predictive of late death. We conclude that postinfarction left ventricular aneurysm remains a high risk complication especially when associated with other mechanical complications. When arhythmogenicity is present we suggest rhythmologic surgery and in all cases, complete revascularization.     

Variable structure control of an SRM drive

The applications of a variable-structure system (VSS) to the control of a switched reluctance motor (SRM) drive is presented. After reviewing the operation of an SRM drive, a VSS-based scheme is formulated to control the drive speed. The scheme is then designed and tested by simulation. The results show that the VSS control is effective in reducing the torque ripple of the motor, compensating for the nonlinear torque characteristics, and making the drive insensitive to parameter variations and disturbances     

Portosystemic shunt in Budd-Chiari syndrome: long-term survival and factors affecting shunt patency in 25 patients in Western countries

BACKGROUND: In Budd-Chiari syndrome (BCS) treated by portosystemic shunt, postoperative shunt thrombosis is associated with high morbidity and mortality rates. The aim of this study was to determine factors associated with shunt thrombosis. METHODS: From 1985 to 1991, 25 patients underwent portosystemic shunt for BCS. According to the patency of the shunt during the postoperative period and follow-up, patients were divided into two groups including 17 patients with patent shunt and 8 (32%) with shunt thrombosis. RESULTS: In patients with patent shunt, actuarial survival rate at 5 years was 87% versus 38% in patients with shunt thrombosis (p < 0.05). Duration of symptoms before operation was higher in patients with shunt thrombosis than in patients with patent shunt (315 +/- 483 vs 109 +/- 168 days, p < 0.05). In patients with patent shunt, extensive fibrosis or cirrhosis was observed in 3 of 17 (18%) versus in 5 of 8 (63%) of patients with shunt thrombosis (p < 0.05). Shunt thrombosis was observed in 3 of 3 patients (100%) with the combination of myeloproliferative disorder, duration of symptoms more than 100 days, and cirrhosis versus 0 of 6 (0%) patients without this combination (p < 0.05). CONCLUSIONS: In acute form of BCS (with short history of the disease and absence of extensive fibrosis or cirrhosis), early portal decompression is mandatory, with low risk of shunt thrombosis and good long-term results. In chronic form of BCS, the risk of shunt thrombosis is high and long-term results are bad; in these patients, orthotopic liver transplantation must be considered.     

Simultaneous solving of balancing and sequencing problems with station-dependent assembly times for mixed-model assembly lines

In spite of many studies, investigating balancing and sequencing problems in Mixed-Model Assembly Line (MMAL) individually, this paper solves them simultaneously aiming to minimize total utility work. A new Mixed-Integer Linear Programming (MILP) model is developed to provide the exact solution of the problem with station-dependent assembly times. Because of NP-hardness, a Simulated Annealing (SA) is applied and compared to the Co-evolutionary Genetic Algorithm (Co-GA) from the literature. To strengthen the search process, two main hypotheses, namely simultaneous search and feasible search, are developed contrasting Co-GA. Various parameters of SA are reviewed to calibrate the algorithm by means of Taguchi design of experiments. Numerical results statistically show the efficiency and effectiveness of the proposed SA in terms of both the quality of solution and the time of achieving the best solution. Finally, the contribution of each hypothesis in this superiority is analyzed.     

Syndecan-1 Depletion Has a Differential Impact on Hyaluronic Acid Metabolism and Tumor Cell Behavior in Luminal and Triple-Negative Breast Cancer Cells

Glycosaminoglycans (GAGs) and proteoglycans (PGs) are major components of the glycocalyx. The secreted GAG and CD44 ligand hyaluronic acid (HA), and the cell surface PG syndecan-1 (Sdc-1) modulate the expression and activity of cytokines, chemokines, growth factors, and adhesion molecules, acting as critical regulators of tumor cell behavior. Here, we studied the effect of Sdc-1 siRNA depletion and HA treatment on hallmark processes of cancer in breast cancer cell lines of different levels of aggressiveness. We analyzed HA synthesis, and parameters relevant to tumor progression, including the stem cell phenotype, Wnt signaling constituents, cell cycle progression and apoptosis, and angiogenic markers in luminal MCF-7 and triple-negative MDA-MB-231 cells. Sdc-1 knockdown enhanced HAS-2 synthesis and HA binding in MCF-7, but not in MDA-MB-231 cells. Sdc-1-depleted MDA-MB-231 cells showed a reduced CD24-/CD44+ population. Furthermore, Sdc-1 depletion was associated with survival signals in both cell lines, affecting cell cycle progression and apoptosis evasion. These changes were linked to the altered expression of KLF4, MSI2, and miR-10b and differential changes in Erk, Akt, and PTEN signaling. We conclude that Sdc-1 knockdown differentially affects HA metabolism in luminal and triple-negative breast cancer model cell lines and impacts the stem phenotype, cell survival, and angiogenic factors.     

Fatigue behaviour and modelling of talc‐filled and short glass fibre reinforced thermoplastics,including temperature and mean stress effects

Effects of temperature and mean stress on fatigue behaviour of talc‐filled polypropylene (PP‐T) and short glass fibre reinforced polypropylene (PP‐G), polyamide‐66 (PA66), and a blend of polyphenylene ether and polystyrene (PPE/PS) were investigated. Load‐controlled fatigue tests were conducted under positive stress ratios (R = 0.1 and 0.3) and at several temperatures (T = 23, 85 and 120 °C). Larson–Miller parameter was used and a shift factor of Arrhenius type was developed to correlate fatigue data at various temperatures. Effect of mean stress on fatigue life was significant for some of the studied materials; however, for the PPE/PS blend no effect of mean stress was observed. Modified Goodman and Walker mean stress equations were evaluated for their ability to correlate mean stress data. A general fatigue life prediction model was also used to account for the effects of mean stress, temperature, anisotropy and frequency.     

Bi-objective parallel machines scheduling with sequence-dependent setup times using hybrid metaheuristics and weighted min–max technique

In the literature of multi-objective problem, there are different algorithms to solve different optimization problems. This paper presents a min–max multi-objective procedure for a dual-objective, namely make span, and sum of the earliness and tardiness of jobs in due window machine scheduling problems, simultaneously. In formulation of min–max method when this method is combined with the weighting method, the decision maker can have the flexibility of mixed use of weights and distance parameter to yield a set of Pareto-efficient solutions. This research extends the new hybrid metaheuristic (HMH) to solve parallel machines scheduling problems with sequence-dependent setup time that comprises three components: an initial population generation method based on an ant colony optimization (ACO), a simulated annealing (SA) as an evolutionary algorithm employs certain probability to avoid becoming trapped in a local optimum, and a variable neighborhood search (VNS) which involves three local search procedures to improve the population. In addition, two VNS-based HMHs, which are a combination of two methods, SA/VNS and ACO/VNS, are also proposed to solve the addressed scheduling problems. A design of experiments approach is employed to calibrate the parameters. The non-dominated sets obtained from HMH and two best existing bi-criteria scheduling algorithms are compared in terms of various indices and the computational results show that the proposed algorithm is capable of producing a number of high-quality Pareto optimal scheduling plans. Aside, an extensive computational experience is carried out to analyze the different parameters of the algorithm.     

A high performing metaheuristic for job shop scheduling with sequence-dependent setup times

This paper investigates scheduling job shop problems with sequence-dependent setup times under minimization of makespan. We develop an effective metaheuristic, simulated annealing with novel operators, to potentially solve the problem. Simulated annealing is a well-recognized algorithm and historically classified as a local-search-based metaheuristic. The performance of simulated annealing critically depends on its operators and parameters, in particular, its neighborhood search structure. In this paper, we propose an effective neighborhood search structure based on insertion neighborhoods as well as analyzing the behavior of simulated annealing with different types of operators and parameters by the means of Taguchi method. An experiment based on Taillard benchmark is conducted to evaluate the proposed algorithm against some effective algorithms existing in the literature. The results show that the proposed algorithm outperforms the other algorithms.