Analysis of fly ash heavy metal content and disposal in three thermal power plants in India

The study investigates the heavy metal content of fly ash and bottom ash from three major power plants in North India, using flame atomic absorption spectrometry. It also studies the prevalent disposal methods used at these sites. The ashes were analysed for the presence of Cr, Mn, Pb, Zn, Cu, Ni and Co and detectable levels of all were found in both fly ash and bottom ash. The concentrations of Cr and Zn were highest while Co concentration was less. The wet disposal method is used in two of the power plants (site 1 and site 3). Neither of the sites uses ash pond lining in the construction of the ash ponds, hence leaching of the heavy metals is possible. Site 2 has adopted 100% dry disposal system which allows better utilization but incurs additional costs. Better management practices, increased utilization and proper disposal practices need to be undertaken to minimize the adverse environmental impact.     

Design of Dual-Band Beam Switching Array for Adaptive Antenna Applications Using Hybrid Directional Coupler and E-Shape Slot Radiator

Wireless Personal Communications - Applications of wireless sensor networks (WSNs) are increasing tremendously to facilitate and establish a link between the physical world and information system....     

Verification of the applicability of lattice model to concrete fracture by AE study

Notched three-point bend specimens (TPB) were tested under crack mouth opening displacement (CMOD) control at a rate of 0.0004 mm/s and the entire fracture process was simulated using a regular triangular two-dimensional lattice network only over the expected fracture process zone width. The rest of the beam specimen was discretised by a coarse triangular finite element mesh. The discrete grain structure of the concrete was generated assuming the grains to be spherical. The load versus CMOD plots thus simulated agreed reasonably well with the experimental results. Moreover, acoustic emission (AE) hits were recorded during the test and compared with the number of fractured lattice elements. It was found that the cumulative AE hits correlated well with the cumulative fractured lattice elements at all load levels thus providing a useful means for predicting when the micro-cracks form during the fracturing process, both in the pre-peak and in the post-peak regimes.     

Green Nanocomposites of Natural Rubber/ Olivine Nanosilica: Viscoelastic,Mechanical, Transport and Thermal Characterizations

Silicon - Nanosilica was synthesized from a low cost raw material, olivine by a more sustainable and cost effective method. The pure nanosilica obtained was amorphous in nature with a surface area...     

Rheological behavior of neat and carbon fiber-reinforced poly(ether ketone ketone) for extrusion deposition additive manufacturing

To develop new materials for extrusion additive manufacturing (AM) systems, a fundamental understanding of rheological properties is essential to correlate the effect of processing on material structure and its properties. In this work, the rheological properties of five different grades of neat and carbon fiber (CF)-reinforced poly(ether ketone ketone) are reported. Rheological properties are essential to understand the effect of reinforcing fibers and AM process parameters such as time, temperature, environment, and shear rate on flow behavior during processing. Small-amplitude oscillatory shear tests and steady shear tests indicated neat grades to exhibit less increase in viscosity over time when processed in air than the CF-filled grades. The filled grades showed greater shear thinning and lower sensitivity to temperature. Overall, this rheological analysis provides a broad framework for determining appropriate processing conditions for extrusion deposition AM of such high-temperature polymer systems.     

Understanding the metabolic burden of recombinant antibody production in Saccharomyces cerevisiae using a quantitative metabolomics approach

The cellular changes induced by heterologous protein expression in the yeast Saccharomyces cerevisiae have been analysed on many levels and found to be significant. However, even though high‐level protein production poses a metabolic burden, evaluation of the expression host at the level of the metabolome has often been neglected. We present a comparison of metabolite profiles of a wild‐type strain with those of three strains producing recombinant antibody variants of increasing size and complexity: an scFv fragment, an scFv–Fc fusion protein and a full‐length IgG molecule. Under producing conditions, all three recombinant strains showed a clear decrease in growth rate compared with the wild‐type strain and the severity of the growth phenotype increased with size of the protein. The levels of 76 intracellular metabolites were determined using a targeted (semi) quantitative mass spectrometry based approach. Based on unsupervised and supervised multivariate analysis of metabolite profiles, together with pathway activity profiling, the recombinant strains were found to be significantly different from each other and from the wild‐type strain. We observed the most prominent changes in metabolite levels for metabolites involved in amino acid and redox metabolism. Induction of the unfolded protein response was detected in all producing strains and is considered to be a contributing factor to the overall metabolic burden on the cells.     

Nanoscale zerovalent iron-Sargassum swartzii biocomposites for the removal of malachite green from an aqueous solution

A novel nanoscale zerovalent iron-Sargassum swartzii (nZVI-SS) biocomposite was tested for its ability to remove malachite green from aqueous solutions. Batch equilibrium tests at different pH conditions showed that at pH 10, a maximum removal of 142.85 mg/g was observed according to Langmuir model. Involvement of various functional groups of the biosorbent in preferential biosorption of cationic dye was observed using Fourier transform infrared spectroscopy. Morphological changes occurring on the biocomposite materials were characterized using scanning electron microscopy. Furthermore, temperature and kinetic profiles during the biosorption process were also reported.     

Spatial and temporal changes in the volatile profile of Alphonso mango upon exogenous ethylene treatment

Alphonso is a highly favoured and exported mango cultivar among the vast mango germplasm of India. Being a climacteric fruit, ethylene plays an important role in ripening of mango. For deeper understanding of effect of pre-climacteric ethylene treatment on volatile profiles of Alphonso mango, 26 volatiles were tracked through six ripening stages of pulp and skin of ethylene-treated and control Alphonso fruits. The study revealed accelerated ripening in terms of early appearance of ripening-specific compounds, lactones and mesifuran, upon ethylene treatment. While the level of lactones remained unaffected, the mesifuran level vastly increased upon ethylene treatment. Skin showed high terpene content while pulp had higher amount of lactones compared to skin. This work points towards involvement of ethylene as a natural hormone in the biosynthesis of lactones and furanones in naturally ripened fruits; whereas, an increase in the terpene level during ripening appears to be independent of ethylene.