Design of 5.9 ghz dsrc-based vehicular safety communication

The automotive industry is moving aggressively in the direction of advanced active safety. Dedicated short-range communication (DSRC) is a key enabling technology for the next generation of communication-based safety applications. One aspect of vehicular safety communication is the routine broadcast of messages among all equipped vehicles. Therefore, channel congestion control and broadcast performance improvement are of particular concern and need to be addressed in the overall protocol design. Furthermore, the explicit multichannel nature of DSRC necessitates a concurrent multichannel operational scheme for safety and non-safety applications. This article provides an overview of DSRC based vehicular safety communications and proposes a coherent set of protocols to address these requirements     

A Monte Carlo simulation study of the mechanical and conformational properties of networks of helical polymers. I. General concepts

We study the mechanical and conformational properties of networks of helical polymers with a combination of Monte Carlo simulations based on the Wang-Landau algorithm and the three-chain model. We find that the stress-strain behavior of these networks has novel features not observed in typical networks made of synthetic polymers. In particular, we find that as these networks are stretched they first strengthen, then soften and finally strengthen again. This non-monotonic behavior of the stress correlates with the one of the helical content and is rationalized by the elongation-induced formation and melting of the helical structure of the polymer. We complement these results with a study of other conformational properties of the polymer strands that clarify the molecular mechanisms behind the mechanical behavior of these networks. Finally, we present a qualitative comparison of some of our results with the theoretical ones recently reported by Kutter and Terentjev.     

mRNA for cardiac calcium channel is expressed during development of skeletal muscle

During the early development of skeletal muscle, cardiac isotypes of several contractile proteins are known to be transiently expressed. We report here that skeletal muscle developing in vivo, as well as primary cultures derived from skeletal muscle, express mRNA encoding the cardiac dihydropyridine-sensitive calcium channel. The mRNA is detectable at high concentration at the earliest stage tested in vivo and diminishes rapidly in concentration as myofibers mature. The concentration of the cardiac calcium channel mRNA also diminishes during the in vivo development of skeletal muscle in a genetically paralyzed mouse (mdg), indicating that muscle contractile activity is not necessary for the down-regulation. In contrast, mRNA for the skeletal muscle-specific calcium channel accumulates gradually in developing skeletal muscle. A similar temporal pattern of expression is also seen in primary cultures of skeletal myotubes. These results raise the question of whether the cardiac calcium channel may be functionally important during the early development of skeletal myofibers.     

Kinetics of hydroformylation of 1-decene using homogeneous HRh(CO)(PPh3)3 catalyst: a molecular level approach

The kinetics of hydroformylation of 1-decene using homogenous HRh(CO)(PPh₃)₃ catalyst has been reported in the temperature range of 50–70 °C. The effect of catalyst,P _{H 2},P _CO, and 1-decene concentration on the rate of hydroformylation has been studied. Based on the analysis of initial rate data, a rate equation has been proposed and kinetic parameters evaluated. The activation energy was found to be 11.76 kcal/mol. A molecular level approach to kinetic modelling has also been illustrated. The rate equation derived assuming oxidative addition of H₂ as a rate determining step, has been found to represent the data satisfactorily. The rate parameters for the mechanistic model have been evaluated for the data at 60 °C.NCL Communication No. 5735.     

Novel Gas-Liquid-Solid Reactors

Multiphase reactors involving gas, liquid, and solid phases have several important applications in the chemical industry, particularly in catalytic processes. Some of the well-known examples are: hydrogenation and oxidation of organic compounds, hydro-processing coal-derived and petroleum oils, Fischer-Tropsch synthesis, and methanation reactions. Due to the presence of three phases, the problem of reactor design is often important to achieve effective mass and heat transfer as well as a mixing pattern favorable to the particular process. The reactors are mainly of two types: (a) solid catalyst is suspended either by mechanical agitation or gas-induced agitation and (b) solid catalyst is in a fixed bed with concurrent or countercurrent feed of gas and liquid re-actants. The reactor types conventionally used in industry are: (a) mechanically agitated or bubble column slurry reactors and (b) trickle-bed or packed-bed bubble reactor. The various design and modeling aspects of these reactors have been reviewed by Satterfield [1], Chaudhari and Ramachandran [2], Shah [3,4], Ramachandran and Chaudhari [5], Shah et al. [6], and Herskowitz and Smith [7]. In several industrial processes these reactor designs are modified to achieve a certain specific objective, such as better heat or mass transfer, higher catalyst efficiency, better reactor performance and selectivity, etc. Similarly, specially designed reactors are often used for laboratory kinetic studies or to understand a certain phenomenon. Thus, novel multiphase reactors are becoming important from both academic and industrial viewpoints. Some of the recently introduced novel gas-liquid-solid reactor types are: (a) loop recycle slurry reactors, (b) basket-type reactors, (c) ebullated-bed reactors, (d) internal or external recycle reactors, (e) multistage slurry or packed-bed reactors, (f) column reactors with sieve trays or multiple agitators, (g) gas-induced agitated reactors, and (h) horizontal-packed-bed reactors. are being used in several new commercial processes, and various design aspects, such as hydrodynamics and mass and heat transfer, have been the subject of investigations in the last few years. However, no attempt to review the scattered information on these novel gas-liquid-solid reactors has been made. Therefore, the main objective of this paper is to review important developments in novel gas-liquid-solid reactors. For each type of reactor, advantages, disadvantages, and applications are discussed. Further, the status of information on hydrodynamics and mass transfer parameters and scale-up considerations is reviewed. These novel reactor designs are being used in several new commercial processes, and various design aspects, such as hydrodynamics and mass and heat transfer, have been the subject of investigations in the last few years. However, no attempt to review the scattered information on these novel gas-liquid-solid reactors has been made. Therefore, the main objective of this paper is to review important developments in novel gas-liquid-solid reactors. For each type of reactor, advantages, disadvantages, and applications are discussed. Further, the status of information on hydrodynamics and mass transfer parameters and scale-up considerations is reviewed.     

Language Structure Using Fuzzy Similarity

Learning of (context-free) grammar rules that are based on alignment between texts of a given collection of sentences has attracted the attention of many researchers. We define and study the alignment profile and formulate fuzzy similarity of alignment profiles for a given collection of sentences. Using the fuzzy-similarity-based profile alignment, we give a methodology to formulate stochastic context-free grammar (CFG) rules. We introduce profile-alignment-based dynamic sentence similarity threshold to formulate the rules of stochastic CFG. The proposed methodology is tested using Child Language Data Exchange System (CHILDES) dataset of sentences. The benefits of our approach are experimentally demonstrated. Since our approach does not make use of any domain knowledge, it is expected to be useful in wide variety of applications requiring model construction.     

Speed Control of DC Motor with MRPID Controller in the Presence of Noise

Speed control of a DC motor has always been a challenge because of its variable torque. But it becomes more challenging when noise enters the system at its input. Therefore, there is a need of more advanced controllers. In this paper, a multi-resolution proportional integral derivative (MRPID) controller has been proposed to be utilized to control the speed of a DC motor. It works well even in the presence of noise as compared to the conventional PID controller. Also, performance of a PID controller deteriorates when nonlinearity or uncertainty arises in the system. This degraded performance can be improved by utilizing the multi-resolution property of wavelets, which decomposes the error signal into various frequency components. Further, wavelet coefficients of these decompositions are used to generate the control signal for controlling speed of a DC motor. In this paper, performances of a MRPID, a fractional order PID (FOPID) and a conventional PID controllers are compared in the presence of noise for speed control of a DC motor. The results obtained using a MRPID controller are observed to be better in terms of improved transient characteristics and disturbance rejection for a DC motor as compared to those obtained with PID and FOPID controllers.

     

Enhanced photoluminescence from CdS nanocrystals encapsulated by PVP and SHMP

The effects of the stabilizing agent on the structural and luminescence properties of cadmium sulfide (CdS) nanocrystals have been investigated. Samples were prepared by chemical precipitation method using sodium hexametaphosphate (SHMP) and polyvinyl pyrrolidone (PVP). The structural and optical properties have been studied by X-ray diffraction (XRD), ultraviolet-visible (UV-Vis) absorption, photoluminescence (PL) and Fourier transform infrared (FTIR) spectroscopy. XRD patterns confirm the presence of cubic zinc blend crystal structure with space group F-43m. The results show the variation in crystallite size with change in surfactant. Blue shift in absorption edge as compared to bulk CdS is found. PL results represent broad and very intense red emission with smaller particle size due to modification of surface emitting states with surfactant.     

Antineoplastic and antioxidant potential of phycofabricated silver nanoparticles using microalgae Chlorella minutissima

This study for the first time reports on fresh water microalgae Chlorella minutissima aqueous extract (CmAe) which was utilized for the biogenic synthesis of silver nanoparticles and tested their antineoplastic potential against Liver Hepatocellular Carcinoma (HepG2) cell line. The characteristic colour change of the reaction mixture from greenish yellow to yellowish brown confirmed the synthesis of Chlorella minutissima silver nanoparticles (CmAgNPs). Microscopic analysis revealed CmAgNPs to be spherical‐shaped with particle size ranging from 10 to 30 nm. The carbohydrates and proteins distinctive peaks were observed in Fourier transform infrared spectroscopy (FTIR) spectra which suggested these biomolecules acted as reducing and capping agents. Further, the crystalline nature of CmAgNPs was confirmed by X‐ray diffraction (XRD) analysis. CmAgNPs showed maximum free radical scavenging proving it to be more potent antioxidant agent as compared to CmAe. The mortality rate of HepG2 cells treated with CmAgNPs was found to be 91.8 % at 120 μg/ml with IC₅₀ value 12.42 ± 1.096 μg/ml after 48 h whereas no effect was observed on normal Human Embryonic Kidney (HEK 293) cells. Fluorescent images of the treated HepG2 cells revealed the formation of apoptotic bodies, condensed nuclei and cell shrinkage indicating their effectiveness against the cancer cells.Inspec keywords: silver, nanoparticles, nanomedicine, microorganisms, cellular biophysics, nanofabrication, scanning electron microscopy, transmission electron microscopy, atomic force microscopy, proteins, Fourier transform infrared spectra, molecular biophysics, X‐ray chemical analysis, X‐ray diffraction, kidney, cancer, biomedical materialsOther keywords: antineoplastic potential, antioxidant potential, phycofabricated silver nanoparticle, Chlorella minutissima, freshwater microalgae, aqueous extract, liver hepatocellular carcinoma cell line, CmAgNP synthesis, field emission scanning electron microscopy, high‐resolution transmission electron microscopy, atomic force microscopy, dynamic light scattering, carbohydrate, protein, Fourier transform infrared spectroscopy, biomolecule, energy‐dispersive X‐ray spectroscopy, elemental silver signal, CmAgNP crystalline, X‐ray diffraction analysis, antioxidant agent, HepG2 cell mortality rate, human embryonic kidney, HEK 293 cell, fluorescent image, apoptotic body formation, condensed nuclei, cell shrinkage, cancer cell, antineoplastic agent, Ag