Beneficial effects of wettability altering surfactants in oil-wet fractured reservoirs

In fractured reservoirs, an effective matrix-fracture mass transfer is required for oil recovery. Surfactants have long been considered for oil recovery enhancement, mainly in terms of their ability to reduce oil–water interfacial tension. These surfactants are effective when the fractured formations are water-wet, where capillary imbibition of surfactants from the fracture into the matrix contributes to oil recovery. However, another beneficial aspect of surfactants, namely their ability to alter wettability, remains to be explored and exploited. Surfactants capable of altering wettability can be especially beneficial in oil-wet fractured formations, where the surfactant in the fracture diffuses into the matrix and alters the wettability, enabling imbibition of even more surfactant into the matrix. This sequential process of initial diffusion followed by imbibition continues well into the matrix yielding significant enhancements in oil recovery.In order to test this hypothesis of sequential diffusion–imbibition phenomenon, Dual-Drop Dual-Crystal (DDDC) contact angle experiments have been conducted using fractured Yates dolomite reservoir fluids, two types of surfactants (nonionic and anionic) and dolomite rock substrates. A new experimental procedure was developed in which crude oil equilibrated with reservoir brine has been exposed to surfactant to simulate the matrix-fracture interactions in fractured reservoirs. This procedure enables the measurements of dynamic contact angles and oil–water interfacial tensions, in addition to providing the visual observations of the dynamic behavior of crude oil trapped in the rock matrix as it encounters the diffusing surfactant from the fractures. Both the measurements and visual observations indicate wettability alterations of the matrix surface from oil-wet to less oil-wet or intermediate wet by the surfactants. Thus this study is of practical importance to oil-wet fractured formations where surfactant-induced wettability alterations can result in significant oil recovery enhancements. In addition, this study has also identified the need to include contact angle term in the dimensionless Bond number formulations for better quantitative interpretation of rock–fluids interactions.     

In Situ Performance Testing of Deteriorating Water Tanks for Durability Assessment

Reports of failure of existing concrete structures due to a lack of durability, rather than a deficiency in structural strength, has made concrete technologists, engineers, and researchers focus research on the parameters influencing durability performance with respect to time. Systematic performance monitoring, with respect to chosen durability parameters of existing concrete structures, will decide the direction of future research in this area. Inferences based on laboratory simulations and testing need to be confirmed by in situ field measurements and studies. In situ condition rating and performance monitoring surveys have been conducted by many researchers, scientists, and professional associations, and reported in literature. Inferences of few such studies are summarized and discussed. Deterioration of concrete structures constructed in recent times is observed at relatively faster rates, and has been mainly attributed to cracking. Cracking is associated with the use of faster-hydrating portland cements with increased fineness and the tricalcium silicate (C3S) content to support the high speed of modern construction. In the present research, a case study of deteriorated water tank structures situated in the semitropical region of India is presented. Some selected parameters—such as concrete cover, carbonation depth, chloride concentration, compressive strength, etc. which influence long term durability of structures—have been measured.     

Reaction of zirconium fluoride glass with water: kinetics of dissolution

When liquid water contacts a zirconium-barium-lanthanum fluoride glass, at least three different processes occur. Barium and zirconium fluoride dissolve into the water, water penetrates into the glass, and zirconium fluoride crystals grow on the glass surface, in static solution. The rate of dissolution, as measured by solution analysis, is possibly controlled by diffusion in the solid surface; surface blockage and surface reactions are other possible kinetic steps involved. Diffusion in solution is not the controlling mechanism. Hydrogen profiles in the glass surface suggest that the penetration rate of water into the glass is controlled by diffusion and a surface reaction.     

Correlation analysis of geothermal data in North America

Correlation studies of the geothermal parameters have been carried out for Michigan Basin and the results are interpreted with the help of observed relations between heat flow, geological age and crustal thickness for North America. Heat flow and geothermal gradient are found to decrease with thermal conductivity, while they are positively correlated with each other, supporting the earlier findings of Negi et al. (1974). It is noted that, to some extent, these associations can be explained with the help of variations in crustal thickness.     

Life quality index for the estimation of societal willingness-to-pay for safety

The engineering and management of human safety is an important societal objective that includes extensive efforts by governments, both legislative and administrative, to enhance the health and safety of the public. Although the achievement of safety goals depend primarily on individuals and organizations responsible for safety, much support is drawn from expertise in diverse scientific and engineering disciplines. The activities range from structural safety (dams, tunnels, bridges to tall buildings) to safe operation of hazardous industrial installations (energy generation facilities, LNG terminals, petrochemical plants) to transportation systems (airline, rail, car safety) to technologies designed to minimize adverse impacts on the environment. All these activities are crucially concerned with risk: with the likelihood and the probable effects of various measures on life and health. We have developed a unified rationale and a clear basis for effective strategic management of risk across diverse sectors. Safety is an important objective in society but it is not the only one. The allocation of society's resources devoted to safety must be continually appraised in light of competing needs, because there is a limit on the resources that can be expended to extend life. The paper presents the Life Quality Index (LQI) as a tool for the assessment of risk reduction initiatives that would support the public interest and enhance safety and quality of life. The paper provides an intuitive reformulation of the LQI as equivalent to a valid utility function that is consistent with the principles of rational decision analysis. The LQI is further refined to consider the issues of discounting of life years, competing background risks, and population age and mortality distribution. The LQI is applied to quantify the societal willingness-to-pay, which is an acceptable level of public expenditure in exchange for a reduction in the risk of death that results in improved life-quality.     

Pad effects on material-removal rate in chemical-mechanical planarization

The role of a porous pad in controlling material-removal rate (MRR) during the chemical-mechanical planarization (CMP) process has been studied numerically. The numerical results are used to develop a phenomenological model that correlates the forces on each individual abrasive particle to the applied nominal pressure. The model provides a physical explanation for the experimentally observed domains of pressure-dependent MRR, where the pad deformation controls the load sharing between active-abrasive particles and direct pad-wafer contact. The predicted correlations between MRR and slurry characteristics, i.e., particle size and concentration, are in agreement with experimentally measured trends reported by Ouma¹ and Izumitani.²     

Photostability of polyetherurethaneureas

Polyetherurethaneureas (PEUUs) were synthesised from polyethylene-glycols (PEGs) of molecular weight 400, 600 and 1000, 4,4′-diphenylmethanediisocyanate (MDI) and aliphatic diamine chain extenders, 1,3-propanediamine (PDA) and 1,6-hexanediamine (HDA). Polymer films were irradiated with 365 nm light at 293 K and the effects of polyether soft segment length and urea hard segment on photo-oxidative stability were studied by following the variation in weight-average molecular weight (M _w), gel formation and stress-strain properties. Changes in ultraviolet and infrared spectroscopy were monitored on photo-oxidation and hydroperoxide content determined. The soft segment length was increased by increasing the molecular weight of PEG from 400 to 1000 and hard segment structure was changed by variation of diamine. It was noted that the structure of urea and polyether soft segment length plays an important role in photostability of PEUUs. PDA chain extended PEUUs were more stable than HDA chain extended PEUUs.     

Influence of the prebuckling stress-field on the critical loads of inhomogeneous composite laminates

The paper studies the uniaxial buckling behavior of composite laminates in which preselected variations of fiber spacing in the constituent laminae are adopted. Such laminates are referred to as inhomogeneous laminates because of the variable elastic stiffness along the coordinate axes. A non-uniform prebuckling stress state observed even under constant uniaxial compression has a pronounced influence on the buckling behaviour of an inhomogeneous laminate. A procedure is summarized for computing the critical load of a laminate using the Ritz method which exploits an analogy between the bending and stretching formulations and utilizes Gram-Schmidt orthogonal polynomials. The paper illustrates that the variation in fiber spacing is an innovative way of increasing the critical load for a prescribed amount of fiber and highlights its remarkable sensitivity to the nature of fiber spacing, in-plane and out-of-plane boundary conditions, fiber type and the aspect ratio of the laminate.