A review on queueing network models with finite capacity queues for software architectures performance prediction

A review is carried out on how queueing network models with blocking have been applied so far into the performance evaluation and prediction of Software Architectures (SA). Queueing network models with finite capacity queues and blocking have recently been introduced and applied as more realistic models of systems with finite capacity resources and population constraints. Queueing network models have been often adopted as models for the evaluation of software performance. Starting from our own experience, we observe the need of a more accurate definition of the performance models of SA to capture some features of the communication systems. We consider queueing networks with finite capacity and blocking after service (BAS) to represent some synchronization constraints that cannot be easily modeled with queueing network models with infinite capacity queues. We investigate the use of queueing networks with blocking as performance models of SA with concurrent components and synchronous communication. Queueing theoretic analysis is used to solve the queueing network model and study the synchronous communication and performance of concurrent software components. Our experience is supported by other approaches that also propose the use of queueing networks with blocking. Directions for future research work in the field are included.     

FMR and EXAFS modeling of heat-treated Fe-rich and Co-rich TM-M thin films

Ion-beam sputter-deposited alloy films of Co/sub 74/Fe/sub 6/B/sub 15/Si/sub 5/ and Fe/sub 75/Ni/sub 5/B/sub 15/Si/sub 5/ were examined for their magnetic and structural properties. Films were characterized by ferromagnetic resonance, vibrating sample magnetometry, and extended X-ray absorption fine structure (EXAFS) analysis. Using atomic parameters deduced from EXAFS modeling and fitting procedures, magnetic properties were calculated with no adjustable parameters. Correlation between perpendicular FMR measurements and EXAFS first-shell modeling suggests a low-temperature formation of cobalt-borides in the Co/sub 74/Fe/sub 6/B/sub 15/Si/sub 5/ alloy. Annealed Fe/sub 75/Ni/sub 5/B/sub 15/Si/sub 5/ samples did not display evidence of structural and/or magnetic instabilities until the onset of long-range crystallization near T/sub ann/=400 degrees C.<>     

Prognostic significance of cytoplasmic p53 overexpression in colorectal cancer. An immunohistochemical analysis

Early reconstruction of the thumb carpometacarpal (CMC) joint after traumatic dislocation, when instability is present, may decrease the incidence of recurrent instability and post-traumatic joint degeneration. We report two retrospective cohort groups of patients who had sustained a traumatic thumb CMC joint dislocation. The first 8 patients, group A, were treated with closed reduction and pinning. Because the results were unsatisfactory with 4 patients, requiring revision surgery for recurrent instability in 3 and degenerative arthritis in 1, the treatment plan was changed to open reduction with a flexor carpi radialis weave, group B. The 9 patients in group B underwent early (an average of 7 days after injury) ligamentous reconstruction to decrease the incidence of joint damage from recurrent instability and improve long-term functional results. For patients in group B with a minimum follow-up period of 2 years, pain was not a major problem, and range of motion and grip strength were essentially preserved. The functional variables affected most in both groups were thumb abduction, which was decreased by 10%, and pinch strength, which was decreased by 13%, in group B, as compared to 20% and 19%, respectively, for the patients in group A. Radiographically, the joint space was slightly narrowed (Eaton stage II) in 3 cases in group B; however, these were asymptomatic. In group A, 5 patients demonstrated degenerative changes of the CMC joint (3 Eaton stage II, 2 stage III), and 3 patients were symptomatic after treatment.     

Transport properties of dichloromethane in glassy polymers. I. Atactic polystyrene films

Sorption and diffusion of dichloromethane vapor were measured in atactic polystyrene films, obtained with different cooling conditions and after controlled aging times at different temperatures. The diffusional behavior is characterized by three zones, depending on temperature and penetrant activity. In Zone I, at low activity, the diffusion coefficient is independent of vapor concentration; Zone II is characterized by concentration-dependent diffusion, whereas in Zone III structural transformations are possible. The study of diffusion at three temperatures allowed building of a temperature-penetrant concentration diagram, which is very useful to visualize the different zones of behavior. The aging at room temperature has no effect on the curve of sorption as a function of vapor activity, whereas it determines two effects on the diffusion: a decrease of the zero concentration diffusion coefficient and a more and more anomalous behavior with the aging time. The aging at 70°C produces the same effects on the diffusion behavior as the aging at room temperature; in addition, a decrease sorption is observed at low penetrant activity. The possible presence of ordered domains, impermeable to the vapor, in the samples stored at 70°C, was suggested on the basis of sorption results.     

Molecular orientation in drawn smectic and crystalline isotactic polypropylene

The drawing behavior of two polypropylene films of different structures was analyzed. The two films differ as a consequence of different quenching conditions. At low temperature, a biphasic smectic-amorphous system was obtained, while quenching at 100°C produced a biphasic crystalline-amorphous system. The drawing of samples was carried out at 110°C at which temperature the smectic phase is not stable and is transformed into the crystalline α-form. The initial structure affects the drawing behavior and the properties of the drawn samples. The mechanical, optical, and X-ray analyses clearly show that high molecular orientation is achieved at lower deformations in the initially smectic sample. In particular, the amorphous phase is highly oriented, inducing higher axial elastic modulus.     

Variational multiscale large-eddy simulations of the flow past a circular cylinder: Reynolds number effects

Variational multiscale large-eddy simulations (VMS–LES) of the flow around a circular cylinder are carried out at different Reynolds numbers in the subcritical regime, viz. Re = 3900, 10,000 and 20,000, based on the cylinder diameter. A mixed finite-element/finite-volume discretization on unstructured grids is used. The separation between the largest and the smallest resolved scales is obtained through a variational projection operator and finite-volume cell agglomeration. The WALE subgrid scale model is used to account for the effects of the unresolved scales; in the VMS approach, it is only added to the smallest resolved ones. The capability of this methodology to accurately predict the aerodynamic forces acting on the cylinder and in capturing the flow features are evaluated for the different Reynolds numbers considered. The sensitivity of the results to different simulation parameters, viz. agglomeration level and numerical viscosity, is also investigated at Re = 20,000.     

Compositional characteristics and aromatic profile of date palm seeds from seven varieties grown in Tunisia

This paper reports a discrimination study based on the physico‐chemical characteristics, fatty acids and profile of volatile compounds of the seeds from seven date palm varieties (Phoenix dactylifera L.) grown in Tunisia. Date seeds contained 10.49–14.76% moisture; 6.28–11.2% fat (on a dry weight basis); 2.67–12.85% protein; 0.91–6.06% reducing sugar; 0.61–2.98% sucrose and 0.97–1.17% ash. Gas liquid chromatography revealed that the oil fraction of the date palm seeds contained eighteen fatty acids, with oleic acid (30.77–42.50%) and lauric acid (18.51–27.48%) as the main unsaturated and saturated ones. Volatile profile showed differences among varieties. In total, forty‐five compounds were identified, mainly alcohols, aldehydes and unsaturated hydrocarbons ones. This study provides evidence that the seeds of date may be a potential source of valuable nutrients with interesting functionality.     

Semi-transparent blotches removal from sepia images exploiting visibility laws

This paper presents a novel model for the removal of semi-transparent blotches on the digitized copy of sepia archive photographs. As these defects cannot be successfully eliminated by conventional interpolation methods, a proper combination of a novel visual distortion and multiresolution analysis is used for performing user-independent detection and restoration. Extensive experimental results and comparative studies show the potential of the proposed model in terms of visual quality and computational complexity.     

A polyfluoroalkyl imidazolium ionic liquid as iodide ion source in dye sensitized solar cells

We report on the use of a fluorinated imidazolium ionic liquid as a source of iodide ions in solvent-based electrolytes for DSSCs. Efficient dye regeneration and fast charge transport in the fluorinated electrolyte result in an overall improvement of the device performances compared to conventional hydrogenated ionic liquids.     

A Cumulative Effect of Food and Viruses to Trigger Celiac Disease (CD): A Commentary on the Recent Literature

Celiac disease (CD) is a type of inflammatory chronic disease caused by nutrients such as gliadin that induce a TC (T cell)-mediated response in a partially known genetical background in an environment predisposed to inflammation, including viruses and food. Various experimental and clinical observations suggest that multiple agents such as viruses and bacteria have some common, inflammatory pathways predisposing individuals to chronic inflammatory diseases including celiac disease (CD). More recently, a Western diet and lifestyle have been linked to tissue inflammation and increase in chronic inflammatory diseases. In CD, the gliadin protein itself has been shown to be able to induce inflammation. A cooperation between viruses and gliadin is present in vitro and in vivo with common mechanisms to induce inflammation. Nutrients could have also a protective effect on CD, and in fact the anti-inflammatory Mediterranean diet has a protective effect on the development of CD in children. The possible impact of these observations on clinical practice is discussed.