半导体光开关工作电流和速率的理论分析

本文从载流子连续性方程出发，采用半导体双异质结概念，从理论上推出了计算半导体光波导开关工作电流和速率的理论公式，为器件选取工作电流和提高开关速率提供了理论依据．     

Thermal analysis of wirelessly powered thermo-pneumatic micropump based on planar LC circuit

This paper studies the thermal behavior of a wireless powered micropump operated using thermo-pneumatic actuation. Numerical analysis was performed to investigate the temporal conduction of the planar inductor-capacitor (LC) wireless heater and the heating chamber. The result shows that the temperature at the heating chamber reaches steady state temperature of 46.7°C within 40 seconds. The finding was further verified with experimental works through the fabrication of the planar LC heater (RF sensitive actuator) and micropump device using MEMS fabrication technique. The fabricated device delivers a minimum volume of 0.096 μL at the temperature of 29°C after being thermally activated for 10 s. The volume dispensed from the micropump device can precisely controlled by an increase of the electrical heating power within the cut-off input power of 0.22 W. Beyond the power, the heat transfer to the heating chamber exhibits non-linear behavior. In addition, wireless operation of the fabricated device shows successful release of color dye when the micropump is immersed in DI-water containing dish and excited by tuning the RF power.

     

磁场对非寻常超导体小晶体的作用

研究了外磁场作用下的小晶体序参量的各种模式配对破坏效应。对于偶和奇宇称超导体的小晶体，磁场的作用具有定性的差别，并具正常和超态的转变可以是一致的。     

Textured mesh surface reconstruction of large buildings with multi-view stereo

There are three main approaches for reconstructing 3D models of buildings. Laser scanning is accurate but expensive and limited by the laser’s range. Structure-from-motion (SfM) and multi-view stereo (MVS) recover 3D point clouds from multiple views of a building. MVS methods, especially patch-based MVS, can achieve higher density than do SfM methods. Sophisticated algorithms need to be applied to the point clouds to construct mesh surfaces. The recovered point clouds can be sparse in areas that lack features for accurate reconstruction, making recovery of complete surfaces difficult. Moreover, segmentation of the building’s surfaces from surrounding surfaces almost always requires some form of manual inputs, diminishing the ease of practical application of automatic 3D reconstruction algorithms. This paper presents an alternative approach for reconstructing textured mesh surfaces from point cloud recovered by patch-based MVS method. To a good first approximation, a building’s surfaces can be modeled by planes or curve surfaces which are fitted to the point cloud. 3D points are resampled on the fitted surfaces in an orderly pattern, whose colors are obtained from the input images. This approach is simple, inexpensive, and effective for reconstructing textured mesh surfaces of large buildings. Test results show that the reconstructed 3D models are sufficiently accurate and realistic for 3D visualization in various applications.     

光电子集成器件研究的新进展

本文介绍 OEIC 器件,侧重于基于 GaAs 和 InP 材料的、应用于光纤通信的 OEIC 发射器、接收器和中继器的发展现状、器件性能和各种关键新工艺,并探讨了其发展动向。     

Brønsted Base‐Catalyzed Tandem Isomerization–Michael Reactions of Alkynes: Synthesis of Oxacycles and Azacycles

An efficient synthesis of oxacycles and azacycles was developed using a Brønsted base‐catalyzed tandem alkyne isomerization–Michael reaction sequence. Functionalized 2‐alkylidenetetrahydrofurans were prepared by an intramolecular oxy‐Michael reaction on an allene that was generated in situ from an alkynoate. The aza‐Michael version using alkynylamines, alkynylamides and alkynyl carbamates led to piperidines, lactams and oxazolidinones, respectively. An enantioselective version of this reaction resulted in an axially chiral lactam with high enantioselectivity. Some alkynes, however, were unable to complete the intramolecular Michael reactions and provided enantioenriched allenes.     

A Sampling Theorem Approach to Traffic Sensor Optimization

With the objective of minimizing the total cost, which includes both sensor and congestion costs, the authors adopted a novel sampling theorem approach to address the problem of sensor spacing optimization. This paper presents the analysis and modeling of the power spectral density of traffic information as a 2-D stochastic signal using highly detailed field data. The field data were captured by the next-generation simulation (NGSIM) program in 2005. To the best knowledge of the authors, field data with such a level of detail were previously unavailable. The resulting model enables the derivation of a characterization curve that relates sensor error to sensor spacing. The characterization curve, concurring in general with observations of a previous work, provides much more detail to facilitate sensor deployment. Based on the characterization curve and a formulation relating sensor error to congestion cost, the optimal sensor spacing that minimizes the total cost can be determined.