防黑客设计技术

随着嵌入设备渗透进社会,并承担起更加重要的角色,安全失效会带来潜在的灾难性的后果。嵌入设备以无人干预方式运行在很多领域的数千种关键任务或安全相关系统中,如制造、健康保健、运输、金融和军事等。虽然我们不假思索地依赖于这些嵌入系统,但任何一种嵌入系统都可能成为临时黑客、犯罪团伙、恐怖分子,甚至敌对政府分子的潜在目标。阻止这些攻击的重任就落在了系统设计者的肩上,他不仅要保证通过或保存在嵌入设备中的数据的安全,而且还要保护产品本身的知识产权。     

点阴极电场辅助阳极连接中的紧密接触面积和电流

用等效电路的方法研究了点阴极情况下的电场辅助阳极连接效应，计算了连接电流，连接孕育期和紧密接触面积，本文结果表明，连接初期电流迅速衰减，随后缓慢变小，直至某一稳定值，孕育期随温度上升指数下降，连接温度高时，孕育期将难以观察到；待连接表面之间紧密接触面积随时间延长而非线性扩展，紧密接触区域增大时，其边界向外推进速度渐小，而接触面积增加渐快。     

Short contact time dissolution of vitrinite and inertinite concentrates

The short contact time dissolution of vitrinite and inertinite concentrates of an Australian bituminous coal was studied under isothermal conditions with tetralin as solvent. The reactivity of the two maceral types and the yields and nature of the products were determined for a range of reaction temperatures (400, 420 and 440 °C) and reaction times (2–20 min). The dissolution of vitrinite proceeded at a significantly greater rate than for inertinite and was associated with greater selectivity to soluble non-gaseous products. At very short reaction times (2 min), the vitrinite underwent solubilizing reactions to yield products of higher molecular weight and greater oxygen functionality than was the case for inertinite, for which changes in the chemical nature of the products were negligible over the range of conditions studied. At longer reaction times (5 min), the composition of the vitrinite-derived products was similar to that of the inertinite-derived products.     

Particle Penetration through Inclined and L-Shaped Cracks

This paper presents a particle penetration model predicting particle penetration coefficient (Pp) through a narrow crack of arbitrary incline angles (θ). The objective was to simulate Pp for outdoor-to-indoor particle penetration for residential infiltration conditions. This model assumes laminar infiltration flow and considers particle deposition from both gravitational sedimentation and Brownian diffusion. For micron-sized particles, modeling results indicate that gravitational sedimentation is the major deposition mechanism. Pp increases monotonically with ∣θ∣ because effective particle sedimentation velocity (vs?cos?θ) decreases monotonically with ∣θ∣. For submicron-sized particles (0.1?μm), Brownian diffusion is the major particle deposition mechanism. Because Brownian diffusion is a nondirectional deposition mechanism, crack inclination did not affect Pp. This study applied this model to estimate Pp for L-shaped cracks, and validated modeling results with experiments. Experimental results indicated that inertial impaction and crack entrance cutoff effects were not significant particle deposition mechanisms for the test micron-sized particles. Gravitational sedimentation was the major deposition mechanism. An L-shaped crack can be simulated as the combination of horizontal and vertical sections. This model agreed reasonably with experimental results.     

A process model for active brazing of ceramics: Part II Optimization of brazing conditions and joint properties

In the present investigation, the process model developed in Part I has been applied to evaluate the microstructure and strength evolution during active brazing of ceramics. As a starting point, reaction-layer growth is assumed to occur isothermally with no restrictions in the supply of reactive element. Different kinds of diagrams are then constructed to show how specific process variables (e.g. the heating and cooling period, the limiting layer thickness, and the diffusion mechanism) affect the growth kinetics. It is concluded that the key to improved joint properties lies in control of the reaction-layer thickness through optimization of the brazing conditions, and an illustration of this is given. This revised version was published online in November 2006 with corrections to the Cover Date.     

Antiserum against Escherichia coli J5 contains antibodies reactive with outer membrane proteins of heterologous gram-negative bacteria

The binding of IgG in antiserum to Escherichia coli J5 to the surface of Enterobacteriaceae and to cell wall fragments released from serum-exposed bacteria was studied in a search for potentially protective epitopes other than lipopolysaccharide (LPS). IgG titers to multiple heterologous gram-negative smooth bacteria increased following incubation of the bacteria in serum and decreased following absorption with serum-exposed heterologous bacteria. IgG eluted from absorbing bacteria bound to at least three conserved bacterial outer membrane proteins (OMPs), but not LPS, as assessed by immunoblotting. The same OMPs were present in LPS-containing macromolecular cell wall fragments released by incubation of heterologous gram-negative bacteria in human serum. Part of the protection offered by J5 antiserum could be from binding of IgG to conserved OMPs at the bacterial surface or to OMPs in cell-wall fragments released from dying bacteria.     

Tissue specific expression of FMR-1 provides evidence for a functional role in fragile X syndrome

Prostaglandin E2 levels in isolated rat islets were increased from 64 +/- 11 pg/30 islets when incubated in medium containing 2 mM glucose to 115 +/- 9 pg/30 islets in medium containing 20 mM glucose. In contrast, glyceraldehyde (10 mM) reduced prostaglandin E2 levels to 29 +/- 6 pg/30 islets. Inhibition of glucose metabolism by mannoheptulose (10 mM) abolished the stimulatory effect of glucose on prostaglandin E2 levels and inhibited glucose-induced insulin release. The cyclooxygenase inhibitor, flurbiprofen (20 microM), did not affect insulin release caused by glucose or glyceraldehyde. In the presence of 1 mg/ml bovine serum albumin, insulin secretion induced by 20 mM glucose (6.9 +/- 1.1% of islet insulin content) was reduced by the lipoxygenase inhibitor BW755 C (20 microM) to 3.1 +/- 0.6%, and by the phospholipase A2 inhibitor, p-bromophenacyl bromide (10 microM), to 2.1 +/- 0.8%. In the absence of bovine serum albumin the inhibitory action of BW755 C and p-bromophenacyl bromide on glucose-induced insulin release was significantly more pronounced. These drugs whether in the presence or absence of bovine serum albumin, did not affect glyceraldehyde-stimulated insulin secretion. Glyceraldehyde (10 mM), potentiated glucose-induced insulin release in the presence of 2-8 mM glucose, but not for 10-20 mM glucose. Although the phospholipase A2 activator, melittin, initiated insulin release in the presence of 2 mM glucose and enhanced 10 mM glyceraldehyde-stimulated insulin secretion it had no effect on 20 mM glucose-induced insulin release. These two stimulatory effects of melittin on insulin release were totally abolished by p-bromophenacyl bromide.(ABSTRACT TRUNCATED AT 250 WORDS)