防黑客设计技术

随着嵌入设备渗透进社会,并承担起更加重要的角色,安全失效会带来潜在的灾难性的后果。嵌入设备以无人干预方式运行在很多领域的数千种关键任务或安全相关系统中,如制造、健康保健、运输、金融和军事等。虽然我们不假思索地依赖于这些嵌入系统,但任何一种嵌入系统都可能成为临时黑客、犯罪团伙、恐怖分子,甚至敌对政府分子的潜在目标。阻止这些攻击的重任就落在了系统设计者的肩上,他不仅要保证通过或保存在嵌入设备中的数据的安全,而且还要保护产品本身的知识产权。     

Organic Materials and Thin‐Film Structures for Cross‐Point Memory Cells Based on Trapping in Metallic Nanoparticles

Non‐volatile solid‐state memory cells based on composites of metal nanoparticles and polymers are embedded in organic semiconducting host materials. This paper presents data from a wide range of materials and device structures and shows that the switching phenomenon is commonly observed.     

Short contact time dissolution of vitrinite and inertinite concentrates

The short contact time dissolution of vitrinite and inertinite concentrates of an Australian bituminous coal was studied under isothermal conditions with tetralin as solvent. The reactivity of the two maceral types and the yields and nature of the products were determined for a range of reaction temperatures (400, 420 and 440 °C) and reaction times (2–20 min). The dissolution of vitrinite proceeded at a significantly greater rate than for inertinite and was associated with greater selectivity to soluble non-gaseous products. At very short reaction times (2 min), the vitrinite underwent solubilizing reactions to yield products of higher molecular weight and greater oxygen functionality than was the case for inertinite, for which changes in the chemical nature of the products were negligible over the range of conditions studied. At longer reaction times (5 min), the composition of the vitrinite-derived products was similar to that of the inertinite-derived products.     

Intrinsic Volume Changes of Self-propagating Synthesis

The final product(s) of self-propagating synthesis are shown to be intrinsically denser than the starting reactants. This behavior results in intrinsic decreases in the sample volume that increase with both the heat of reaction and the adiabatic combustion temperature. Forming of liquid product(s) during reaction simply adds another intrinsic source of porosity, i.e. changes in volume on product solidification. Thus, obtaining fully dense bodies from self-propagating synthesis requires a mechanism for reducing porosity, e.g. hot-pressing.     

Particle Penetration through Inclined and L-Shaped Cracks

This paper presents a particle penetration model predicting particle penetration coefficient (Pp) through a narrow crack of arbitrary incline angles (θ). The objective was to simulate Pp for outdoor-to-indoor particle penetration for residential infiltration conditions. This model assumes laminar infiltration flow and considers particle deposition from both gravitational sedimentation and Brownian diffusion. For micron-sized particles, modeling results indicate that gravitational sedimentation is the major deposition mechanism. Pp increases monotonically with ∣θ∣ because effective particle sedimentation velocity (vs?cos?θ) decreases monotonically with ∣θ∣. For submicron-sized particles (0.1?μm), Brownian diffusion is the major particle deposition mechanism. Because Brownian diffusion is a nondirectional deposition mechanism, crack inclination did not affect Pp. This study applied this model to estimate Pp for L-shaped cracks, and validated modeling results with experiments. Experimental results indicated that inertial impaction and crack entrance cutoff effects were not significant particle deposition mechanisms for the test micron-sized particles. Gravitational sedimentation was the major deposition mechanism. An L-shaped crack can be simulated as the combination of horizontal and vertical sections. This model agreed reasonably with experimental results.     

Antiserum against Escherichia coli J5 contains antibodies reactive with outer membrane proteins of heterologous gram-negative bacteria

The binding of IgG in antiserum to Escherichia coli J5 to the surface of Enterobacteriaceae and to cell wall fragments released from serum-exposed bacteria was studied in a search for potentially protective epitopes other than lipopolysaccharide (LPS). IgG titers to multiple heterologous gram-negative smooth bacteria increased following incubation of the bacteria in serum and decreased following absorption with serum-exposed heterologous bacteria. IgG eluted from absorbing bacteria bound to at least three conserved bacterial outer membrane proteins (OMPs), but not LPS, as assessed by immunoblotting. The same OMPs were present in LPS-containing macromolecular cell wall fragments released by incubation of heterologous gram-negative bacteria in human serum. Part of the protection offered by J5 antiserum could be from binding of IgG to conserved OMPs at the bacterial surface or to OMPs in cell-wall fragments released from dying bacteria.     

Effect of postnatal exposure to a PCB mixture in monkeys on multiple fixed interval-fixed ratio performance

Behavioral impairment as a consequence of PCB exposure beginning in utero has been reported in both humans and animals. The present study assessed the behavioral consequences of postnatal exposure to PCBs. Male monkeys (Macaca fascicularis) were dosed from birth to 20 weeks of age with 7.5 microgram(s)/kg/day of a PCB mixture representative of the PCBs typically found in human breast milk (eight monkeys) or vehicle (four monkeys). At 4 years of age, performance under a multiple fixed interval (FI)-fixed ratio (FR) schedule of reinforcement was assessed. The FI component was more sensitive to disruption as a result of PCB exposure than was the FR component. PCB-exposed monkeys displayed shorter mean interresponse times (IRTs) than controls, particularly during the earlier sessions of the experiment. Similarly, the increase in pause time characteristic of the acquisition of typical FI performance emerged more slowly across sessions in the PCB-treated group. However, the number of short IRTs (less than 5 s) remained greater in the treated group compared to controls over the 48-session duration of the experiment. On the FR component, control monkeys decreases the mean pause time across sessions whereas the PCB-treated group did not; there were no differences between groups for absolute value of average IRT or pause time. The results of this study extend previous research in this cohort of monkeys, and provide further evidence that PCB exposure limited to the early postnatal period and resulting in environmentally relevant body burdens produces long-term behavioral effects.