宣钢1260 m3高炉扩容大修改造设计

宣钢l260m^3高炉大修改造时将炉容扩大到l350m^3，对高炉本体系统设备及冷却系统、自动控制及检测系统进行了全面的改造更新，在炉腹、炉腰及炉身下部高热负荷区域采用铜冷却壁，取消炉身中上部铸铁冷却壁凸台，并采用薄内衬等先进、适用、可靠、成熟的技术。     

Channel-carrier mobility parameters for 4H SiC MOSFETs

In this paper, mobility parameters for enhancement-mode N-channel 4H SiC MOSFETs are extracted and implemented into 2-D device simulation program and SPICE circuit simulator. The experimental data were obtained from lateral N-channel 4H SiC MOSFETs with nitrided oxide–semiconductor interfaces, exhibiting normal mobility behavior. The presence of increasing interface-trap density (D_it) toward the edge of the conduction band is included during the 2-D device simulation. Using measured distribution of interface-trap density for simulation of the transfer characteristics leads to a good agreement with the experimental transfer characteristic.     

A Web‐based and Group Learning Environment for Introductory Environmental Engineering

The use of computer‐based technology is becoming more prevalent in the classroom. As a part of an educational research project sponsored by the GE Foundation, strategies for augmenting a course, Introduction to Environmental Engineering (CE 280), were investigated including cross‐disciplinary experiences in teamwork, design, and the use of advanced teaching technologies such as the web. Interactive tools to assist student learning were developed and refined. Efforts have focused on developing an extensive website, web‐based quizzes and homework assignments, and tutorials. Base groups were used to provide both intellectual and emotional support to students. This paper summarizes the development of this course and the impact of rapid feedback on the progression of student understanding.     

Organic‐acid‐catalyzed sol–gel route for preparing poly(methyl methacrylate)–silica hybrid materials

In this study, a series of organic–inorganic hybrid sol–gel materials consisting of a poly(methyl methacrylate) (PMMA) matrix and dispersed silica (SiO₂) particles were successfully prepared through an organic‐acid‐catalyzed sol–gel route with N‐methyl‐2‐pyrrolidone as the mixing solvent. The as‐synthesized PMMA–SiO₂ nanocomposites were subsequently characterized with Fourier transform infrared spectroscopy and transmission electron microscopy. The solid phase of organic camphor sulfonic acid was employed to catalyze the hydrolysis and condensation (i.e., sol–gel reactions) of tetraethyl orthosilicate in the PMMA matrix. The formation of the hybrid membranes was beneficial for the physical properties at low SiO₂ loadings, especially for enhanced mechanical strength and gas barrier properties, in comparison with the neat PMMA. The effects of material composition on the thermal stability, thermal conductivity, mechanical strength, molecular permeability, optical clarity, and surface morphology of the as‐prepared hybrid PMMA–SiO₂ nanocomposites in the form of membranes were investigated with thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, gas permeability analysis, ultraviolet–visible transmission spectroscopy, and atomic force microscopy, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

6LoWPAN在物联网中的应用仿真

提出了一种基于6LoWPAN的物联网总体方案,同时对协议中的Mesh字段进行了改进,然后在网络模拟环境下对本协议平均传输成功率、平均延迟时间的性能进行了比较分析,并在仿真环境中进行了实验验证工作。实验数据表明,改进后的协议具有更好的性能。     

利用测井资料评价储集层性质的探讨

根据对储集层之简化导电模型的理论分析,提出了一个由电阻率、孔隙度信息表示的、反映储层性质的“孔隙结构参数S”。实际应用表明,S参数在评价储集层性质、计算储层渗透率等方面具有一定的使用价值。     

银氧化锡触头制备工艺对比及其电弧侵蚀特性综述

介绍了银氧化锡触头在不同制备工艺下的基本原理以及合成方法,从每种合成方法的基础上提出了改良制备工艺,并介绍了近些年使用的新型制备工艺,分析了每种制备工艺的优缺点.总结了银氧化锡的电弧侵蚀机理与模型、电弧侵蚀形状外貌特征以及抗电弧侵蚀特性.并对未来银基材料的发展方向以及研究新的复合材料提出了展望.     

Controllable synthesis of pure monodispersed zirconia nanopowders with tetragonal phase

Nanopowders of pure zirconia have been synthesized using citric acid (CA)-assisted lamellar liquid crystal template method. The microstructure of the zirconia powder prepared at the different mole ratios of CA to zirconium oxynitrate (ZN) was characterized by FT-IR, X-ray diffraction (XRD), laser particle size analyzer, Raman spectroscopy, and scanning electron microscope (SEM) methods. The phase structure of the sodium dodecyl sulfate (SDS)/C₁₀H₂₁OH/H₂O system before and after adding mixing solution CA and ZN was determined by POM (Polarizing Optical Microscope). The results show that lamellar structure of the SDS/C₁₀H₂₁OH/H₂O system after adding mixing solution CA and ZN is stable. The presence of CA inhibits agglomeration and growth of zirconia particle. The crystallite size of zirconia powders decreases and agglomerates lowly with addition of CA. Fourier transform infrared spectrometry (FI-IR) analyses reveal that the structure of chelating organic complex is maintained in zirconia structure at high-temperature calcination to cause oxygen vacancies which stabilizes the tetragonal phase of zirconia. The zirconia powders remained the single metastable tetragonal phase at the molar ratios of CA to ZN ranging from 1:3 to 5:1. The crystallite size of zirconia with spherical morphology varied from 32.2 to 20.1 nm with the increase of the molar ratio of CA to ZN in the range of 1:3 to 5:1.     

年最大洪峰流量群居蜘蛛优化投影寻踪预测模型

年最大洪峰流量预测,受较多的复杂因素的影响,不确定性较强,用常规统计方法做出准确预报具有较大困难。从水文序列本身出发,提出将投影回归模型应用于年最大洪峰流量预测,为了更好获得投影寻踪模型参数和预测精度,提出了运用延迟相关系数法确定回归预测因子、群居蜘蛛算法优化投影寻踪模型最佳投影方向参数a、利用最小二乘法确定多项式的权系数c、岭函数个数M的群居蜘蛛优化投影寻踪年最大洪峰流量预测模型,结合长江宜昌站(1882年-2004年)的年最大洪峰流量资料进行实例预测,训练阶段平均绝对相对误差为8.61%,预测阶段平均绝对相对误差为10.51%,该模型预测效果较好,模型结果稳定,可有效应用于年最大洪峰流量预测。