Recovery of gold cyanide using inherently conducting polymers

Removal of gold from basic solutions containing [Au(CN)₂]^? has been demonstrated using the inherently conducting polymer polypyrrole. Polymers containing sulfonated aromatic dopants have been found to display a significant ability to remove gold from such solutions. Experiments performed in solutions containing both gold and copper cyanide complexes indicate that the recovery process is not highly selective. However, the polypyrroles used display significantly faster rates of gold recovery than activated carbon. © 2003 Society of Chemical Industry     

Overview and update.

A summary of points of agreement and disagreement among the preceding articles is presented. Attention is called to implicit assumptions which if openly acknowledged would improve dialogue on peer review issues. Pertinent events that have occurred since the Anaheim symposium are reviewed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The effects of pressure on the isothermal fluid behavior of bituminous coals

An investigation into the effects of pressure (helium gas) on the isothermal fluid behavior includes: (1) the effect of pressure on the rate of melting and coking as evidenced by the rate constants k(melt) and k(coke); (2) the effect of pressure on the energies of activation of melting and coking; (3) the effects of pressure on the characteristic times; (4) the effects of pressure on the maximum isothermal fluidity. Results from the effects of pressure on k(melt) revealed that it was generally the high total sulfur, low nitrogen, low reactives/mineral matter ratio, medium rank coals which show the greatest increase in k(melt), whereas the highest rank coals show the least decrease in k(coke). The energies of activation of melting and coking were not significantly affected by pressure. The investigation also reveals increases or decreases in the respective times of softening, maximum fluidity, resolidification and total time of fluid behavior under isothermal pressurized conditions. There appears the possibility that these shifts may be rank dependent. Additionally, the lower rank coals show the largest relative increase in their fluidities when subjected to pressure. Empirical relationships were derived in order to quantitatively predict the maximum isothermal fluidity for most (fluid) coals at a given pressure.     

A compliant-hull concept for planning craft wave-impact shock reduction

The subject of this paper is analysis of high-speed planing-craft wave impact, with the inclusion of hull-surface compliance. The analysis methods were extended in an effort to develop compliant-surface technology for wave-impact shock reduction. The practical outcome of this work, along with experimental cylinder drop-test evaluations, have been reported previously. The overall technology developed is composed of compliant plates over a sub-length of the boat hull. The plates are hinged at the boat keel and supported by vented air bags at the chines. Thus, the required analysis has coupled hydrodynamic, gas-dynamic, and structural-dynamic parts. Only the hydrodynamic part of the complete model is covered here. On the basis of the cylindrical geometry of the drop-test cylinder, two-dimensional theory has been used exclusively. The time history of the distribution of plating deflection predicted from the full analysis is imposed in the free-falling cylinder analysis to demonstrate execution of the hydrodynamic part of the complete coupled theory. The reductions in impact acceleration reported here are therefore the same as determined from the complete analysis.     

Epoxy paint failure in B-52 fuel tanks: Part II. Influence of DIEGME concentration in the fuel on the failure process

A model has been proposed to explain the failure of the original BMS10-39 epoxy paint on upper vertical surfaces in B-52 fuel tanks. The model involves interaction of the paint with DIEGME, a fuel system ice inhibitor (FSII) in jet fuel, that is distilled from the liquid fuel. In this communication, distillation experiments used to support the model are refined to better match the mass transfer of vapor from fuel in a B-52 fuel tank at close to room temperature. The interaction of these lower temperature distillates with the paint affirms the earlier model. On the basis of these experiments it is proposed that paint failure may be controlled or eliminated by reducing the level of DIEGME in the fuel. Proposed changes in military jet fuel composition are detailed.     

Analytical pyrolysis as a tool for the study of plastic coals

The technique of analytical pyrolysis has been used to characterize 40 similar mid-rank western Kentucky coals of widely differing ASTM Gieseler plasticity. Certain pyrolysis/g.c. variables were shown to correlate well with both ASTM Gieseler and isothermal plasticity. Highly plastic coals were shown to exhibit certain characteristic peaks in the 450 °C pyrogram which were absent in the pyrogram of the non-plastic coals. Two coals, representing the two extremes in plasticity, were selected for further study. After extraction with solvents such as DMF the characteristic peaks were absent in the 450 °C pyrogram of the extraction residue of the highly plastic coal. These peaks were also shown to decrease with increasing severity of air oxidation of the plastic coal. This technique appears to be a useful tool for the analysis of mid-rank plastic coals and supports the view that the substances contained in the bitumen fraction of these coals are involved in the development of the plastic state.     

Metalloporphyrins in Oxidative Catalysis. Oxygen Transfer Reactions of Oxochromium Porphyrins

The oxidation of chloro-5-10,15,20-tetramesitylporphyrinotoiron(III) with peroxyacids affords a reactive oxoiron(IV)-porphyrin cation radical species 2. The characterization of 2 and its oxochromium analogs 3, 4 and 5 are reviewed. The nature of reactive oxochromium species derived from chromyl reagents is also reviewed. The oxidation of triphenylphosphine by CrOTPP (11), CrOTTP (13) and CrOTMP (14) is described. Variations in the rate constants indicate that steric factors affect the rate of oxygen atom transfer. Activation parameters for the oxidation of triphenylphosphine by 14 are ΔH^≠ = 6.96 kcal/mol and ΔS^≠ = −39 eu. The oxidation of t-butylphenylcarbinol (18) by CrOTPP gave predominantly benzaldehyde via carbon—carbon bond cleavage while the chromium(III) porphyrin-catalyzed oxidation of 18 by iodosylbenzene afforded t-butylphenylketone.     

Vandermonde and resultant matrices: An abstract approach

We propose an abstract approach to the problems of common divisors and common multiples of rational matrix functions which (in the case of matrix polynomials) have been studied before using Vandermonde and resultant matrices.Supported in part by the Office of Naval Research, Air Force Office of Scientific Research, and the National Science Foundation.The work of this author was partially supported by an NSF grant and was carried out while visiting the University of California, San Diego.     

Using mechatronics to teach mechanical design and technical communication

It is commonly accepted that hands-on experiences increase both learning and enjoyment during coursework. Mechatronics projects provide both interesting and relevant hands-on experiences for a wide range of topics including design processes, basic mechatronics concepts, technical communication, and working in a group environment. ME2110: Creative Decisions and Design at Georgia Tech integrates mechatronics and technical communication into a sophomore level mechanical design class. This paper describes the course in detail, highlighting the course goals and layout, tools provided to the students, industry involvement, and the main challenges of administering such a course.