An integrated system to remote monitor and control anaerobic wastewater treatment plants through the internet.

The TELEMAC project brings new methodologies from the Information and Science Technologies field to the world of water treatment. TELEMAC offers an advanced remote management system which adapts to most of the anaerobic wastewater treatment plants that do not benefit from a local expert in wastewater treatment. The TELEMAC system takes advantage of new sensors to better monitor the process dynamics and to run automatic controllers that stabilise the treatment plant, meet the depollution requirements and provide a biogas quality suitable for cogeneration. If the automatic system detects a failure which cannot be solved automatically or locally by a technician, then an expert from the TELEMAC Control Centre is contacted via the internet and manages the problem.     

Influence of deposition parameters on hole mobility in polymorphous silicon

Time-of-flight transient photoconductivity measurements reveal a monotonic increase with the deposition pressure in the hole mobility in polymorphous silicon for samples deposited under hydrogen dilution. With helium dilution, a maximum mobility that matches the highest value from H-dilution samples is measured at the intermediate pressure of 1.4 Torr. The deposition rate of those samples is twice the rate for the H-dilution ones. For the samples with the best hole mobilities, the valence-band tail is comparable to the one of standard hydrogenated amorphous silicon.     

Breast abscess with lethal septicemia due to Pseudomonas aeruginosa in a patient with AIDS

OBJECTIVE: The incidence of Pseudomonas aeruginosa in HIV-infected patients has increased over the last years. We describe a case of pseudomonal breast abscess complicated with fatal septicemia in an AIDS patient. CASE REPORT: A 21-year-old woman was admitted for fever, chills, nausea, vomiting and pain in the breast. She had a swelling in the right breast of 3 days duration. HIV infection had been confirmed 6 years earlier. CD4 count was 2/mm3. Surgical drainage produced a blue-green purulent discharge which grew Pseudomonas aeruginosa on culture. Despite cloxacilin, then ceftazidime and amikacin, initial improvement was followed 2 weeks later by nodular pulmonary infiltration with cavitation. P. aeruginosa was recovered from sputum and blood cultures, but stepwise resistance developed and the patient died 3 months after admission. DISCUSSION: Breast abscesses are infrequent in nonlactating women. P. aeruginosa is rarely involved, even in HIV patients. Due to the risk of resistance, prompt administration of appropriate antibiotics is required.     

Antagonistic effect of some starter cultures on enterobacteriaceae (E. coli)

The ability of Lactobacillus jensenii and Streptococcus 17SB to inbhibit Escherichia coli was demonstrated. The practical application of the inhibition was examined. Possible roles for several factors in the mechanism of inhibition by Lactobacillus jensenii and Streptococcus 17SB are briefly discussed. The effects of pH reached and acids produced by starters on the growth of Escherichia coli are described.     

A distortion measure to validate and generate curved high‐order meshes on CAD surfaces with independence of parameterization

A framework to validate and generate curved nodal high‐order meshes on Computer‐Aided Design (CAD) surfaces is presented. The proposed framework is of major interest to generate meshes suitable for thin‐shell and 3D finite element analysis with unstructured high‐order methods. First, we define a distortion (quality) measure for high‐order meshes on parameterized surfaces that we prove to be independent of the surface parameterization. Second, we derive a smoothing and untangling procedure based on the minimization of a regularization of the proposed distortion measure. The minimization is performed in terms of the parametric coordinates of the nodes to enforce that the nodes slide on the surfaces. Moreover, the proposed algorithm repairs invalid curved meshes (untangling), deals with arbitrary polynomial degrees (high‐order), and handles with low‐quality CAD parameterizations (independence of parameterization). Third, we use the optimization procedure to generate curved nodal high‐order surface meshes by means of an a posteriori approach. Given a linear mesh, we increase the polynomial degree of the elements, curve them to match the geometry, and optimize the location of the nodes to ensure mesh validity. Finally, we present several examples to demonstrate the features of the optimization procedure, and to illustrate the surface mesh generation process. Copyright © 2015 John Wiley & Sons, Ltd.     

A SIMD-efficient 14 instruction shader program for high-throughput microtriangle rasterization

This paper shows that breaking the barrier of 1 triangle/clock rasterization rate for microtriangles in modern GPU architectures in an efficient way is possible. The fixed throughput of the special purpose culling and triangle setup stages of the classic pipeline limits the GPU scalability to rasterize many triangles in parallel when these cover very few pixels. In contrast, the shader core counts and increasing GFLOPs in modern GPUs clearly suggests parallelizing this computation entirely across multiple shader threads, making use of the powerful wide-ALU instructions. In this paper, we present a very efficient SIMD-like rasterization code targeted at very small triangles that scales very well with the number of shader cores and has higher performance than traditional edge equation based algorithms. We have extended the ATTILA GPU shader ISA (del Barrioet al. in IEEE International Symposium on Performance Analysis of Systems and Software, pp. 231–241, 2006) with two fixed point instructions to meet the rasterization precision requirement. This paper also introduces a novel subpixel Bounding Box size optimization that adjusts the bounds much more finely, which is critical for small triangles, and doubles the 2×2-pixel stamp test efficiency. The proposed shader rasterization program can run on top of the original pixel shader program in such a way that selected fragments are rasterized, attribute interpolated and pixel shaded in the same pass. Our results show that our technique yields better performance than a classic rasterizer at 8 or more shader cores, with speedups as high as 4× for 16 shader cores.     

Microcrystalline silicon: An emerging material for stable thin‐film transistors

Abstract— Top‐gate and bottom‐gate microcrystalline‐silicon thin‐film transistors (TFTs) have been produced at low temperature (150–250°C) by the standard radio‐frequency glow‐discharge technique using three preparation methods: the hydrogen dilution of silane in hydrogen, the layer‐by‐layer technique, and the use of SiF₄‐Ar‐H₂ feedstock. In all cases, a stable top‐gate TFT with mobility values around 1 cm²/V‐sec have been achieved, making them suitable for basic circuit on glass applications. Moreover, the use of SiF₄ gas combined with specific plasma treatments of the a‐SiN:H dielectric produces large columns, even at the interface with the dielectric. This leads to stable bottom‐gate TFTs, fully compatible with today's a‐Si:H production facilities, reaching mobility values up to 3 cm²/V‐sec. These devices are an interesting alternative to laser‐crystallized polysilicon thin films in a growing number of applications.     

Grape seed removal: effect on phenolics,chromatic and organoleptic characteristics of red wine

Winemakers are interested in wines with low bitterness and astringency, and therefore, there is a preference for a higher presence of skin proanthocyanidins in wines. However, the information regarding the effect of reducing or eliminating seed proanthocyanidins from the must or fermenting wine on the characteristics of finished wines is scarce. For this reason, we elaborated a wine using Monastrell grapes from which the seeds had been removed and compared it with a control wine (CW) made from intact grapes. The anthocyanin and proanthocyanidin concentration and profile, and the chromatic and sensory characteristics were studied. The absence of seed proanthocyanidins did not affect anthocyanin concentration, although the proanthocyanidin concentration was 40% lower than in the CW. The copigmentation (CA) study showed that both wines had a similar extent of CA phenomena although colour intensity was higher when seed proanthocyanidins were present. The panellist evaluated the wines elaborated without seeds as being fruitier, less astringent and with an overall higher quality.