Study on Hydrocracking of VGO Derived from Kazakhstan-Russian Mixed Crude

1 Introduction With the successful completion of the construction of the China-Kazakhstan oil pipeline the refinery at Dushanzi Pet- rochemical Company will process the Kazakhstan-Russian mixed crude at full steam starting 2007. The high sulfur, nitro- gen and heavy metals contents in the Kazakhstan-Russian mixed crude would have a serious impact on the secondary processing units of the Dushanzi refinery, in particular on the distillate hydrocracking unit, which mainly operates on vacuum g…     

基于USB总线的虚拟频谱分析仪设计

文章详细介绍了基于USB总线的虚拟频谱分析仪的设计过程。该仪器使用嵌入式混合处理器MC56F8323来实现动态信号的实时采集、频谱分析和数字滤波等功能。处理结果由USB2．0接口芯片CY7C68013上传至PC机．以完成数据显示、存储、绘制图形等功能。其中，CY7C68013工作于Slave FIFO模式，以实现与MC56F8323间的数据传输。该系统可同时对两路动态信号进行实时谱分析，每路采样频率高选500kHz。     

连轧管机组与Accu-Roll轧管机组的比较

介绍了连轧管机组和Accu-Roll轧管机组的发展概况和优缺点，结果得出，连轧管机组大多数指标优于Accu-Roll轧管机组。     

华南地区典型土壤渗透性的改良配置研究

为改善我国华南地区土壤黏性大、渗透性差的问题,研究华南地区土壤与落地灰、砾石、沸石、海砂、草根和枯树叶等多种材料的改良配置,测试不同重量配比下试验土壤的渗透性,获取不同有机、无机材料对典型土壤自然入渗能力的改善效果(包括各种材料的单独作用和择优性混合作用效果)。结果表明:单材料试验中,低重量配比的草根和枯树叶试验土壤的峰值入渗速率分别为0.178 mL/s和0.163 mL/s,且有机材料的改良效果优于无机材料。高重量配比的5～9 mm砾石和5～9 mm落地灰试验土壤分别在重量配比为40%和60%情况下,峰值入渗速率达0.338 mL/s和0.717 mL/s,在同重量配比的所有材料里具有最佳入渗效果。多材料混合试验中,枯树叶、5～9 mm砾石和5～9 mm落地灰相结合的试验土壤实现最佳入渗效果。研究成果为改善华南地区土壤渗透性能提供科学依据。     

不同填料曝气生物滤池启动挂膜试验研究

不同填料曝气生物滤池在相同条件下进行挂膜试验。进水流向为上流式,挂膜方式为复合接种挂膜,即先用活性污泥闷曝接种,然后逐步提高进水流速,直到滤料表面形成稳定的生物膜。结果表明:33 d后挂膜成功,在温度为16～24℃,水力停留时间(HRT)为1 h,DO为6 mg/L的情况下,陶粒BAF对CODMn和NH3—N的去除率分别为23%和80%;沸石BAF的去除率分别为27%和84%;组合填料BAF去除效果最好,去除率分别为32%和92%。     

ESP8266的无线光色电测试系统设计

ESP8266是一款高性能无线芯片,在家居自动化 、可穿戴设备 、工业无线控制等领域都有广泛的应用.本系统以TFT触摸屏作为用户显示界面,检测命令和检测数据在TFT触摸屏进行显示,以Arduino Leonardo平台作为主控模块,ESP8266作为与功率计和光谱仪的无线通信接口,通过ESP8266进行命令和数据的透传,解决了检测设备的无线通信问题.     

几种典型车载移动环境的WiFi扫描机制研究

WiFi技术已逐步由室内应用扩展到室外移动环境,但原本针对游牧式环境而设计的扫描策略尚难以为车载应用提供可靠的宽带连接,为此对WiFi在移动环境下的扫描记录可信度和扫描开销进行了深入探讨,并针对市区内、高速公路、250 km/h和360 km/h高速铁路等几种典型车载移动环境提出了相应的扫描策略优化方案。仿真结果表明,针对这几种典型车载移动环境设计的WiFi扫描策略在综合考虑无线信道部署方案的基础上,可达到较好的扫描记录可信度和较低的扫描开销,从而可为车载WiFi应用提供良好的AP切换判决和宽带数据通信支持。     

基于优先数的智能生产调度系统

生产调度是企业生产中的关键环节,也是实施CIMS的重点。该文介绍了一种基于优先数的动态、多目标优化生产调度方法,并构造了一个基于优先数的智能生产调度系统。系统通过Agent对生产调度问题中的各个目标优化,给出不同目标的指标值,同时给出企业在不同时候对不同目标的偏好值,计算各个生产任务的优先数,根据任务的优先数安排生产。     

Three-dimensional Ni(OH)2 nanoflakes/graphene/nickel foam electrode with high rate capability for supercapacitor applications

Supercapacitor, known as an important energy storage device, is also a critical component for next generation of hydrogen fuel cell vehicles. In this study, we report a novel route for synthesis of three-dimensional Ni(OH)₂/graphene/nickel foam electrode by electrochemical depositing Ni(OH)₂ nanoflakes on graphene network grown on nickel foam current collector and explore its applications in supercapacitors. The resulting binder-free Ni(OH)₂/graphene/nickel foam electrode exhibits excellent supercapacitor performance with a specific capacitance of 2161 F/g at a current density of 3 A/g. Even as the current density reaches up to 60 A/g, it still remains a high capacitance of 1520 F/g, which is much higher than that of Ni(OH)₂/nickel foam electrode. The enhanced rate capability performance of Ni(OH)₂/graphene/nickel foam electrode is closely related to the presence of highly conductive graphene layer on nickel foam, which can remarkably boost the charge-transfer process at electrolyte–electrode interface. The three-dimensional graphene/nickel foam substrate also significantly improves the electrochemical cycling stability of the electrodeposited Ni(OH)₂ film because of the strong adhesion between graphene film and electrodeposited Ni(OH)₂ nanoflakes. Results of this study provide an alternative pathway to improve the rate capability and cycling stability of Ni(OH)₂ nanostructure electrode and offer a great promise for its applications in supercapacitors.     

Molecular Heterojunctions of Oligo(phenylene ethynylene)s with Linear to Cruciform Framework

Electrical transport properties of molecular junctions are fundamentally affected by the energy alignment between molecular frontier orbitals (highest occupied molecular orbital (HOMO) or lowest unoccupied molecular orbital (LUMO)) and Fermi level (or work function) of electrode metals. Dithiafulvene (DTF) is used as substituent group to the oligo(phenylene ethynylene) (OPE) molecular wires and different molecular structures based on OPE3 backbone (with linear to cruciform framework) are achieved, with viable molecular orbitals and HOMO–LUMO energy gaps. OPE3, OPE3–DTF, and OPE3–tetrathiafulvalene (TTF) can form good self‐assembled monolayers (SAMs) on Au substrates. Molecular heterojunctions based on these SAMs are investigated using conducting probe–atomic force microscopy with different tips (Ag, Au, and Pt) and Fermi levels. The calibrated conductance values follow the sequence OPE3–TTF > OPE3–DTF > OPE3 irrespective of the tip metal. Rectification properties (or diode behavior) are observed in case of the Ag tip for which the work function is furthest from the HOMO levels of the OPE3s. Quantum chemical calculations of the transmission qualitatively agree with the experimental data and reproduce the substituent effect of DTF. Zero‐bias conductance, and symmetric or asymmetric couplings to the electrodes are investigated. The results indicate that improved fidelity of molecular transport measurements may be achieved by systematic studies of homologues series of molecular wires applying several different metal electrodes.