GALILEO频率结构和信号设计的分析

描述并分析了由欧盟GALILEO信号特别工作组提出的GALILEO全球卫星导航定位系统的频率结构和信号设计。     

用于自动测试系统继电器矩阵开关的设计

针对目前现有的矩阵开关在性价比、可靠性以及通用性等方面不尽如人意,无法满足中小型自动测试系统的实际要求这一问题;设计了一种用于自动测试系统的继电器矩阵开关,给出了其设计原理、硬件电路图以及主程序流程图;系统搭建完成后,进行8次独立重复试验,测试结果显示:该继电器矩阵开关测试数据的最大误差为±0.3％,同时具有性价比高、通用性好、可靠性较高等优点,特别适合于中小型测试系统的电源通道和信号通道的切换与控制.     

Study on diffusion welding SiCp/ZL101 with Cu interlayer

Through the vacuum diffusion welding SiCp/ZL101 aluminum with Cu interlayer,the effect of welding parame-ter and the thickness of Cu on the welded joint property was investigated,and the optimal welding parameters were putforward at the same time.The microstructure of joint was analyzed by means of optical-microscope,scanning electron mi-croscope in order to study the relationship between the macro-properties of joint and the microstructure.The results showthat diffusion welding with Cu interlayer could be used for welding aluminum matrix composites SiCp/ZL101 successfully.     

离子选择电极在水土流失养分监测中的应用

水土流失径流养分监测通常采用野外采集后进行实验室分析的方法,操作复杂。为验证离子选择电极这种可快速测量养分的方法在水土流失监测中的可靠性,以氨氮离子选择电极为例,与传统纳氏试剂分光光度法进行比较,在准确度、抗离子干扰及坡面径流迁移规律等方面进行实验。结果表明:电极法测定范围最大值为1000 mg/L,分光光度法测定范围最大值为2 mg/L;用幂函数模型模拟坡面径流氨氮迁移规律时,电极法测定值的拟合系数为0.9537,分光光度法的为0.9305。在95%的置信水平上,两方法结果并无显著性差异,而电极法的标准偏差小,其结果更接近标准值。     

我国中压动态无功补偿装置的发展及展望

从无功补偿装置应用的必要性出发,介绍了无功补偿装置的原理及组成,分析了常见无功补偿装置的优缺点,论述了国内外无功补偿装置的应用现状。着重介绍了新技术在SVC装置中应用,对比分析了无功补偿装置中的电力电容器、控制方案和投切元件,最后展望了智能型SVC的广泛应用是中压无功补偿装置的发展方向。     

烟台—淄博输油管道穿河工程对河道防洪影响

结合烟台港西港区至淄博重质液体化工原料输送管道穿越潍河的防洪影响评价项目,简要介绍了穿河输油管道防洪评价的基本内容和方法,对因输油管道建设对河道防洪造成的影响进行了防洪分析计算和综合评价,对影响河道防洪安全的问题提出了相应的建议。     

基于JdbcTemplate的数据库访问处理

pringJdbcTemplate简化了对数据库的访问处理,详细讨论了JdbcTemplate实现对数据库表格的增、删、改、查询的操作处理方法。分别针对多行数据结果集、单值结果的查询需求,给出相应的JdbcTemplate的不同方法调用。在数据更新处理中,讨论了完整SQL和带参数填充的SQL的方法调用形式。最后,结合文件内容的保存与恢复处理实例,介绍了大容量数据的读写,通过LobCreator对象的setBlobAsBinaryStream方法实现LOB数据的写入,通过LobHandler接口提供的系列方法可获取LOB数据。     

QAM modulations with q-ary turbo codes

A new concept of q-ary (q = 2') turbo codes and the corresponding decoding aglorithm are presented. With QAM modulations, the proposed algorithm avoids the information loss caused by a pragmatic approach usually used for a binary code to split the channel measurement information into coding bits. So better performance is achieved. Because of the parallel operation property, the decoding can be speeded up by the proposed algorithm. In addition, a method to reduce the average number of iterations is also considered.     

AlN-SiC_w 复合材料在 1200～1400℃ 的氧化

研究了热压ＡｌＮ－ＳｉＣｗ复合材料在１２００～１４００℃的氧化行为，分析了晶须掺量对复合材料氧化产物、氧化过程的影响。结果表明，复合材料的氧化产物为Ａｌ２Ｏ３、Ｍｕｌｉｔｅ、铝硅酸盐玻璃相。在１２００～１４００℃范围内，复合材料的氧化符合抛物线规律。晶须掺量的变化对复合材料的氧化并无显著影响。     

SnO2 nanocrystallines decorated g-C3N4 composites with enhanced visible-light photocatalytic activity

Abstract

A series of SnO₂ nanocrystallines decorated g-C₃N₄ architectures were synthesized using a facile solvothermal method. The structural, morphological, and optical properties of the as-prepared nanocomposites were characterized in detail, indicating that SnO₂ nanocrystallines with diameter ～ 4?nm were well-dispersed on the surface of g-C₃N_4. The photocatalytic activity of the composites was investigated by degrading rhodamine B (RhB) under visible light irradiation. The CNS2 heterostructure exhibits enhanced photocatalytic activity than bare SnO₂ and g-C₃N₄. Kinetic study revealed a promising degradation rate constant of 0.0593?min^?1 for the CNS2, which is 118 and 7 times higher than that of pure SnO₂ and g-C₃N₄, respectively. What’s more, the CNS2 still retained the photocatalytic activity after three cycle measurements. The enhanced photocatalytic performances of the nanocomposite may be due to its large surface area (116.2 m²/g), appropriate ratio of SnO₂/g-C₃N₄ and the compact structure of the junction between the SnO₂ nanocrystallines and the g-C₃N₄, which inhibits the recombination of photogenerated electrons and holes.