Hot carrier analysis in low-temperature poly-Si thin-film transistors using pico-second time-resolved emission microscope

We have analyzed degradation of N-channel thin-film-transistor (TFT) under dynamic stress using a pico-second time-resolved emission microscope. We have successfully detected emission at pulse fall edge for the first time. Emission intensity increased with the decrease of pulse fall time. As the degradation depended on the pulse fall time, this dependence clearly illustrates that hot electrons are the dominant cause of the degradation under dynamic stress. Based on these dependences, we proposed a model considering electron traps in the poly-Si.     

Viral dynamics of primary viremia and antiretroviral therapy in simian immunodeficiency virus infection

Mathematical modeling of viral replication dynamics, based on sequential measurements of levels of virion-associated RNA in plasma during antiretroviral treatment, has led to fundamental new insights into human immunodeficiency virus type 1 pathogenesis. We took advantage of the simian immunodeficiency virus (SIV)-infected macaque model to perform detailed measurements and mathematical modeling during primary infection and during treatment of established infection with the antiretroviral drug (R)-9-(2-phosphonylmethoxypropyl)adenine (PMPA). The calculated clearance half-life for productively infected cells during resolution of the peak viremia of primary infection was on the order of 1 day, with slightly shorter clearance half-lives calculated during PMPA treatment. Viral reproduction rates upon discontinuation of PMPA treatment after 2 weeks were approximately twofold greater than those obtained just prior to initiation of treatment in the same animals, likely reflecting accumulation of susceptible target cells during treatment. The basic reproductive ratio (R0) for the spread of SIV infection in vivo, which represents the number of productively infected cells derived from each productively infected cell at the beginning of infection, was also estimated. This parameter quantifies the extent to which antiviral therapy or vaccination must limit the initial spread of virus to prevent establishment of chronic disseminated infection. The results thus provide an important guide for efforts to develop vaccines against SIV and, by extension, human immunodeficiency virus.     

Visualization of mitochondria with green fluorescent protein in cultured fibroblasts from patients with mitochondrial diseases

cDNAs for green fluorescent protein (GFP) and for a GFP fusion protein containing the presequence of human ornithine transcarbamylase (pOTC-GFP) were transfected into cultured human fibroblasts. GFP cDNA gave diffuse fluorescence throughout the cytoplasm and the nucleus, whereas pOTC-GFP cDNA gave mitochondria-associated fluorescence. Fluorescent mitochondrial structures could be classified into five patterns: thread-like mitochondria, fine thread-like ones, rod-like ones, granular ones, and granular ones with weak cytosolic fluorescence. pOTC-GFP mutants resulted in a loss of mitochondrial fluorescence and an appearance of weak fluorescence throughout the cytoplasm. pOTC-GFP cDNA was transfected into fibroblasts from patients with various mitochondrial diseases. Higher ratios of fibroblasts with granular mitochondria and those with fine thread-like ones were observed in a patient with Reye's syndrome and a patient with Kearns-Sayre syndrome. Weak cytosolic fluorescence was sometimes observed in fibroblasts from these patients. This method will be useful to analyze mitochondrial structural alterations and disorders of mitochondrial protein import.     

Correlation between serum levels of alanine aminotransferase and ferritin in male blood donors with antibody to hepatitis C virus

Chronic hepatitis C has been demonstrated to be associated with hepatic iron overload, and the hypothesis that the disease activity of hepatitis C is associated with iron cytotoxicity was tested in male volunteer blood donors. Sera with either antibody to hepatitis C virus or hepatitis B surface antigen were selected for determination of ferritin concentration and alanine aminotransferase activity. A correlation between serum ferritin concentration (Y; microgram/l) and alanine aminotransferase activity (X; IU/l) was found in donors with antibody to hepatitis C (log Y = 0.65 x log X + 0.98, r = 0.53, and P < 0.01). The correlation was lower in donors with hepatitis B surface antigen (r = 0.37; P < 0.01). Hepatitis C virus infection probably induces time-dependent iron accumulation associated with the progression of disease activity, while hepatitis B virus infection results in a variety of iron loads with different clinical features. The high disease activity related to hyperferritinemia suggests the presence of iron-induced liver damage in donors with hepatitis C.     

An Analysis of Scheduling Policies In Multiechelon Production Systems

Results of a simulation study of the economics of frequency of rescheduling Material Requirements Planning (MRP) systems are presented for a single-product, two-stage system in which demand is uncertain. The results indicate that for systems with moderate demand uncertainty, frequent rescheduling to maintain customer service may be uneconomical when compared with the alternative of more stable schedules in conjunction with safety stock. This result arises primarily because the cost of “emergency” production setups which occur when rescheduling is frequent exceeds the cost of safety stock required to “protect” stable schedules.     

Acetazolamide challenge and technetium-99m-ECD versus iodine-123-IMP SPECT in chronic occlusive cerebrovascular disease

We compared the acetazolamide challenge test using 99mTc-ECD SPECT and 123I-IMP SPECT images in patients with chronic occlusive cerebrovascular disease. We also evaluated the usefulness of linearization correction for acetazolamide challenge test of 99mTc-ECD SPECT. METHODS: Twenty patients with unilateral chronic occlusive cerebrovascular disease (10 patients had middle cerebral arterial lesion and 10 had internal carotid lesion) were included in the study. Split-dose (a dose fractioning was 1:2), and sequential SPECT technique was used for 99mTc-ECD SPECT studies while only acetazolamide challenge test studies for 123I-IMP SPECT were performed. Permeability surface area product model (PS model) and back-diffusion model (Lassen's correction) were used for linearization correction of acetazolamide challenge with 99mTc-ECD SPECT. RESULTS: Six of 16 patients with reduced vasodilatory capacity in 123I-IMP SPECT were underestimated by 99mTc-ECD SPECT acetazolamide challenge test. Relative ECD uptake normalized by cerebellar uptake compared with IMP uptake showed a nonlinear relationship, indicating relatively less uptake in high flow range. The underestimations of limited vasodilatory capacity observed in 99mTc-ECD SPECT without linearization correction was modified by linearization algorithm. However, the effect of correction based on PS model was superior than that of Lassen's correction. The corrected 99mTc-ECD uptake ratio, based on PS model, and IMP uptake ratio demonstrated a better linear relationship than that of Lassen's correction. CONCLUSION: Technetium-99m ECD SPECT corrected based on the PS model is a better method of linearization for evaluating cerebrovascular reserve using acetazolamide challenge.     

HEURISTIC APPROACHES FOR LOADING PROBLEMS IN FLEXIBLE MANUFACTURING SYSTEMS

Flexible manufacturing systems (FMSs) are able to process a wide variety of operations, but the specific mix of operations that can be performed at any point in time depends upon the combination of tools loaded onto the machines. The machines have tool magazines with finite capacities. We consider the problem of assigning operations and their associated tools to machines (or groups of machines) to maximize the throughput for a specified steady-state mix of orders. Since this objective is difficult to deal with directly, we use an intermediate objective of meeting workload targets for each machine group as closely as possible. A certain form of this intermediate objective has been shown to correlate highly with the original objective.

Since it is computationally intractable to find optimal solutions for problems with more than 20 operations, fast heuristic algorithms are developed. These algorithms are adapted from multi-dimensional bin-packing algorithms. Computational results are reported.     

Effect of crosslinking agent content, monomer functionality, and repeat unit chemistry on properties of unfilled resins

Seven mechanical/physical properties were used to evaluate 10 unfilled resins: eight aromatic dimethacrylates and two urethane dimethacrylates. Physical property tests included compressive strength, Young's modulus in compression, uniaxial tensile strength, intrinsic yield point, toothbrush abrasion, Knoop hardness, and water sorption. Controlled changes were made in the following four material parameters: amount of crosslinking diluent present in the uncured monomer, functionality of the monomer, repeat unit chemistry of the monomer (urethane vs. aromatic structure) and mode of activation (chemical vs. visible light). Polymers containing a high concentration of crosslinking agent (50 wt%) were found to be tougher and to possess lower hardness than materials containing lesser amounts of crosslinking agent. This was attributed to the flexible nature of the triethylene glycol dimethacrylate crosslinking molecule. Exposure to water plasticized the highly crosslinked materials to the degree that the yield point and elastic modulus were effectively lowered. Most of the tested properties were unaffected by differences in functionality except resistance to toothbrush abrasion, which was enhanced for polymers derived from high functionality monomers. The urethane-based polymers sorbed substantially more water than the aromatic-based materials, which presumably resulted in lower values for surface hardness. However, the urethane resins were very tough, and excellent resistance to toothbrush abrasion was observed. Property differences caused by differences in activation mode were small, although the visible light materials did sorb more water.     

Edible vaccine protects mice against Escherichia coli heat-labile enterotoxin (LT): potatoes expressing a synthetic LT-B gene

The authors have designed and constructed a plant-optimize synthetic gene encoding the Escherichia coli heat-labile enterotoxin B subunit (LT-B), for use in transgenic plants as an edible vaccine against enterotoxigenic E. coli. Expression of the synthetic LT-B gene in potato plants under the control of a constitutive promoter yielded increased accumulation of LT-B in leaves and tubers, as compared to the bacterial LT-B gene. The plant-derived LT-B assembled into native pentameric structures as evidenced by its ability to bind ganglioside. The authors demonstrated immunogenicity by feeding mice the raw tubers and comparing the anti-LT-B serum IgG and faecal IgA to that produced in mice gavaged with bacterial LT-B. Mice were fed three weekly doses of 5 g tuber tissue containing either 20 or 50 micrograms LT-B, or gavaged weekly with 5 micrograms of LT-B from recombinant E. coli. One week after the third dose, mice immunized with potato LT-B had higher levels of serum and mucosal anti-LT-B than those gavaged with bacterial LT-B. Mice were challenged by oral administration of 25 micrograms LT, and protection assessed by comparing the gut/carcass mass ratios. Although none of the mice were completely protected, the higher dose potato vaccine compared favourably with the bacterial vaccine. These findings show that an edible vaccine against E. coli LT-B is feasible.