高温超导研究的新进展

本文简要回顾了一年来高温超导的新进展，特别介绍和讨论了新型高温超导体系和线材、带材、块材及薄膜应用的发展情况。     

The relationship among oxygen content, defect distribution and superconductivity in BiSrCaCuO systems

The effect of oxygen content on superconductivity of the 2212 and 2223 phase has been studied. By comparing the excess oxygen, the modulation vector, the XRD patterns, and the electric resistivity of 2212 and 2223 phase samples obtained with different post-annealing conditions, i.e., annealing at 600°C or quenching from 860°C, it was found that the super-conductivity is markedly influenced by both the defect distribution in non-Bi layers and the interstitial oxygens incorporated in the Bi-O layers. A tentative explanation for this is given.     

保持几何特征的自适应弹性二次曲线模型

物体形状特征的准确提取往往受到图像获取、目标分割等过程中各种因素的影响,因而需要构造一种鲁棒的形状表现来保有其本质特征。揭示弹性二次曲线(EQW)模型中能量权重因子和样条重叠度因子与形状几何特性间的关系,提出一种自适应保持几何特征的EQW形状表现模型,并将该模型与交互式Live Wire算法相结合,应用至图像分割中,对于各种模态图像中的目标进行分割实验。直观上,本文方法能够在去除噪声同时较好地保持目标形状的显著特征;量化结果方面,交互式分割误差保持在较小稳定范围内,引入EQW模型带来的时间开销亦在可接受范围内。     

Effect of Pretreatment Atmosphere on CuO/TiO2 Activities in NO + CO Reaction

Using TiO₂ as carrier, CuO/TiO₂ catalysts with different CuO loading were prepared by the impregnation method. The catalytic activities in NO+CO reaction were examined with a micro-reactor gas chromatography reaction system and the methods of TPR, XPS and NO-TPD. It was found that the catalytic activities were affected by pretreatment atmosphere, i.e. H₂ atmosphere > reduction–reoxidation > 10%CO/He > reaction gas (fresh sample). NO decomposition was better by low-valence Cu species than by high-valence Cu species, i.e. Cu⁰>Cu⁺>Cu²⁺. The XPS results indicated that Cu species on CuO/TiO₂ were Cu⁰, Cu⁺, normal Cu²⁺(Cu²⁺(I)) and chain-structured Cu²⁺(Cu²⁺(II)) as –Cu–O–Ti–O–. The activities of Cu²⁺(II) were much higher than that of Cu²⁺(I), but both species were very unstable in the reaction atmosphere and easily reduced by CO, which accounted for the variable activities of fresh catalysts with increasing reaction temperature. In NO+CO reaction, the redox process was a cycle of Cu⁺–Cu²⁺(I) at low reaction temperature but was a cycle of Cu⁰–Cu⁺ at high reaction temperature. As shown by NO-TPD, high catalytic activities could be attributed to the following factors, e.g. oxygen caves on the catalyst’s surface after pretreatment with H₂ and reduction–reoxidation, formation of Cu⁰ after pretreatment with H₂, and increment of Cu species dispersion and formation of Cu²⁺(II) after pretreatment with reduction–reoxidation.     

C3S在NaOH和水中早期水化的ESCA研究

用ＥＳＣＡ研究了Ｃ３Ｓ在水中和ＮａＯＨ溶液中水化１－１０ｍｉｎ试样的表面组成;用等离子发射光谱仪测定了Ｃ３Ｓ早期水化液相中的组成,结果表明：Ｃ３Ｓ早期水化表面组成ｎ（Ｃａ）／ｎ（Ｓｉ）〉３,或ｎ（Ｃａ＋Ｎａ）／ｎ（Ｓｉ）〉３,形成一富Ｃａ层,初步认为Ｃ３Ｓ在ＮａＯＨ溶液中水化,Ｃａ＾３＋溶出受阻而Ｓｉ＾４＋溶出加快：Ｎａ在水化早期进入双电层和表面组成中,实验表明,欲采用ＥＳＣＡ技术测定Ｃ３Ｓ早期水     

尿酸在普鲁士蓝修饰电极上的电化学动力学性质研究

研究了普鲁士蓝修饰玻碳电极（PB/GCE）的优化条件,尿酸（UA）在该修饰电极上的电化学动力学性质.用电化学方法测得了UA在PB/GCE上的电荷转移系数α,反应级数和催化反应速率常数k.结果表明,PB/GCE对UA的氧化具有良好的催化作用,电荷转移系数α=0.65,反应级数为1级,反应速率常数k=1.98×103（mol·L-1）/s.该方法抗干扰能力强,操作简便。     

合成香料的绿色技术研究进展简述

采用绿色技术是制备合成香料的发展趋势.本文介绍了微波技术、有机电合成、分子氧氧化、催化加氢、新型催化剂和不对称催化等绿色技术在香料合成过程中的应用研究进展.     

Rheological behaviors of fresh cement pastes with polycarboxylate superplasticizer

The rheologicalbehaviors of fresh cement paste with polycarboxylate superplasticizer were systematically investigated.Influentialfactors including superplasticizer to cement ratio(Sp/C),water to cement ratio(w/c),temperature,and time were discussed.Fresh cement pastes with Sp/Cs in the range of 0 to 2.0% and varied W/Cs from 0.25 to 0.5 were prepared and tested at 0,20 and 40 °C,respectively.Flowability and rheologicaltests on cement pastes were conducted to characterize the development of the rheologicalbehavior of fresh cement pastes over time.The exprimentalresults indicate that the initialflowability and flowability retention over shelf time increase with the growth in superplasticizer dosage due to the plasticizing effect and retardation effect of superplasticizer.Higher temperature usually leads to a sharper drop in initialflowability and flowability retention.However,for the cement paste with high Sp/C or w/c,the flowability is slightly affected by temperature.Yield stress and plastic viscosity show similar variation trends to the flowability under the abovementioned influentialfactors at low Sp/C.In the case of high Sp/C,yield stress and plastic viscosity start to decline over shelf time and the decreasing rate descends at elevated temperature.Moreover,two equations to roughly predict yield stress and plastic viscosity of the fresh cement pastes incorporating Sp/C,w/c,temperature and time are developed on the basis of the existing models,in which experimentalconstants can be extracted from a database created by the rheologicaltest results.     

Mechanical properties of silica aerogels prepared from a mixture of TEOS and organo-alkoxysilanes of type R1SiX3

Silica aerogels were prepared from a mixture of tetraethylorthosilicate and organo- alkoxysilanes. The effects of organo-alkoxysilanes on the mechanical properties of the silica aerogels were studied. The flexibility of silica aerogels was significantly improved by incorporation of organo-alkoxysilanes. When MTES and TEOS were combined as precursors of silica areogels, with the increased amount of MTES, the apparent elastic modulus and apparent compressive strength monotonously rose. At the same organo- alkoxysilanes to TEOS ratio, the size of alkyl groups of the organo-alkoxysilanes had little effect on the mechanical properties. In series of MTES and TEOS, the lowest elastic modulus of silica skeleton and the highest compressive strength of silica skeleton were observed at MTES to TEOS ratio of around 50：50. At a certain organo-alkoxysilanes to TEOS ratio, the elastic modulus of silica skeleton increased and the compressive strength of silica skeleton decreased with the size increase of the alkvl grouns.