超声波强化原油破乳电脱盐技术的工业实践

报道了采用超声波强化原油破乳电脱盐技术的开发与工业应用.经过实验室开发确定的超声波强化原油破乳电脱盐专利技术--超声波-电场联合破乳脱盐组合技术采用顺逆流方式.该技术于2003年9月在齐鲁分公司完成工业应用试验后,超声波强化原油破乳设备直接投入生产运行,在不加入化学破乳剂的情况下,可使胜利混输原油(平均盐浓度为50 mg/L,平均水质量分数为0.5%～1.0%)脱后盐浓度低于3 mg/L,水质量分数小于0.3%.     

数据采集与监控软件Genie

Genie是具有国际先进水平的数据采集与监控软件，它提供了一个面向对象的图形化用户界面，因此简化了数据采集过程、控制应用程序开发和操作员界面。本文介绍了Genie的特点、功能、基本用途以及VISUALBA－SIC在设计这类监控软件中的作用。     

石油价格机制改革之对策

文章在阐述我国石油价格形成机制的演变过程的基础上,针对我国目前石油定价机制所导致的诸如石油价格变动滞后以及由此带来的市场信号失灵等问题思考了相应的改革对策,提出了调整政府价格管理职能、建立平等竞争的市场规则、完善稳定油价的调控体系以及加快建立石油战略储备等7个方面的建议。     

Synthesis,extraction, and adsorption properties of calix[4]arene‐poly(ethylene‐glycol) crosslinked polymer

Novel calix[4]arene‐poly(ethylene glycol) crosslinked polymer (CCP) has been synthesized by the polycondensation reaction between a p‐tert‐butylcalix[4]arene derivative and dihydroxyl capped poly(ethylene glycol) (DHPEG, M_n = 1000) catalyzed by neodymium tosylate. The hydrogel, consisted of 66.9% water and 33.1% CCP, can selectively extract aromatic organic molecules from aqueous solution according to the diameter of the guest molecules, which infers that the diameter of the calix[4]arene cavity is about 5.4 Å and the conformation of calix[4]arene units altered from cone conformation to 1,3‐alternate conformation during the polycondensation reaction. Furthermore, CCP can also adsorb naphthalene from gas phase, showing much higher capacity than active carbon does, which may have some potential applications in the field of separation and environment protection. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Birman–Wenzl–Murakami algebra, topological parameter and Berry phase

In this paper, a 3?×?3-matrix representation of Birman?CWenzl?CMurakami (BWM) algebra has been presented. Based on which, unitary matrices A(??, ?? ₁, ?? ₂) and B(??, ?? ₁, ?? ₂) are generated via Yang?CBaxterization approach. A Hamiltonian is constructed from the unitary B(??, ??) matrix. Then we study Berry phase of the Yang?CBaxter system, and obtain the relationship between topological parameter and Berry phase.     

Physical properties of transition to chaos in RF-driven Josephson junction analog

An analog circuit is used to investigate the behavior of the transition to chaos in the rf-driven Josephson junction under the variation of excitation amplitude and frequency with McCumber parameter >1. A series of transitions is observed, including a hysteretic jump, symmetry breaking, period doubling, and intermittency prior to chaos, and the transition boundaries are given in a state diagram in the vs. parameter space. Thus, the sequence of transitions to chaos can be inferred from this diagram. Based on these results, the harmonic balance method and Floquet theory are applied to study the instability of the transition series. It is suggested that all these transitions to chaos can be explained as parametric excitations. In addition, the transition boundaries in the state diagram can be satisfactorily computed from the conditions with a Floquet multiplier =±1.     

湖南省技术创新效率研究 ——基于14个市（州）的面板数据

采用DEA模型和Malmquist指数法,对2011—2018年湖南省14个市（州）的技术创新效率进行测算,并对湖南省区域的创新效率进行了聚类分析。研究结果表明：湖南省近几年的创新效率为增长趋势,但是增长幅度较小,究其原因发现技术进步水平偏低是制约湖南省技术创新效率提升的主要原因。从时间上看,创新效率的发展呈现“M”型;从区域来看,部分市州存在投入与产出冗余的情况,且影响技术创新效率的原因不一。最后根据实证结果,建议从加强各区域间协同合作;因地制宜,针对性地提出效率提升战略;注重技术进步,加强引进吸收等方面提高湖南省的创新效率。     

Effect of heat treatment on the microstructure and hardness of C-Cr-W-Mo-V-RE Fe-based hardfacing layer

0IntroductionHot-rollers and scissors are the critical parts of thesteel rolling equipments.At present,the surface soften-ing,the early wearing and the tearing are the primary rea-sons for the lowservice life of the hot-rollers and scissors.Although hardfacing has been applied to repaire the partseasily being worn and torn,such as the hot-rollers and thescissors,and has been obtained economic benefits[1-3],this technology has common problem:if the hardfacing lay-er contains more excessive allo…     

硅压阻式气压高度计的设计与实现

采用硅压阻式压力传感器,以ATmega88PA为控制器设计了气压高度计。内嵌全温度范围的曲面拟合算法进行温度补偿及线性化处理,解决了压力传感器的温漂和非线性问题,并用海拔高度与气压的关系计算高度。测量结果通过RS-485接口发送给上位机。测试结果表明,该气压高度计压力测量误差优于0.50‰,分辨率为0.01 h Pa,线性度为0.999 9;标准大气环境下高度测量误差为0.16 m,线性度为0.999 8。该气压高度计具有质量小、功耗低、精度高、工作可靠等优点。