Radiophotoluminescence phenomenon in copper-doped aluminoborosilicate glass

Radiophotoluminescence phenomena have been widely investigated on various types of materials for dosimetry applications. We report that an aluminoborosilicate glass containing 0.005 mol% copper exhibits intense photoluminescence in the visible region induced by X-ray and γ-ray irradiation. The luminescence is assigned to the 3d⁹4s¹ → 3d¹⁰ transition of Cu⁺. The proportionality of the intensity of the induced photoluminescence to the irradiation dose was confirmed up to 0.5 kGy using ⁶⁰Co γ-ray irradiation. Based on the spectroscopic results, a potential mechanism was proposed for the enhancement of the photoluminescence. The exposure to the ionizing radiation generates electron-hole pairs in the glass, and the electrons are subsequently captured by the Cu²⁺ ions, which are converted to Cu⁺ and emit the luminescence. For the glass containing 0.01 mol% copper, the pronounced enhancement of the photoluminescence was not observed because the reverse reaction, ie, the capture of the holes by the Cu⁺ ions, becomes prominent. The photoluminescence induced by the irradiation was stably observed for the glasses kept at room temperature and even for the glasses heat-treated at 150°C. However, the induced photoluminescence could be eliminated by the heat treatment at a temperature at 500°C, and the glass returned to the initial pre-irradiation state. The Cu-doped aluminoborosilicate glass is a potential candidate for use in dosimetry applications.     

Small PWRs using coated particle fuel for district heating, PFPWR50

It has been said that nuclear energy is an important option for especially developing countries to satisfy their increasing energy demand. However, it will be difficult to deploy first of a kind nuclear power plant in developing countries because extensive safety demonstration has to be conducted in industrialized countries. On the other hand, it will be essential to present rigid proof of reliable operational experience to develop proper understanding of the safety features of new reactor systems among the people around the demonstration plant sites. One of the ways to solve the issue is to integrate existing technologies supported by a great deal of data and experience into a new reactor design. Based on the consideration, a small-sized district heating reactor system based on the pressurized water reactor (PWR) technologies combined with the fuel concept of high temperature gas cooled reactors (HTGRs) has been studied. The purpose of the combination of these two existing concepts is to take the best advantages of both excellent operational experience of PWRs and the integrity of HTGR fuel, coated particle fuel, against fission products release even at high temperature. We expect that this approach will help create a breakthrough to the current stagnation of nuclear power deployment.     

Cavity and crater depth in hypervelocity impact

We discuss the depth of cavities and craters caused by hypervelocity impacts as a function of impact parameters such as impact velocity, projectile and target densities, and projectile diameter, in two extreme cases: the penetration of intact projectiles at low impact pressure and the hemispherical excavation at very high impact pressure. The relations between the depth and the impact parameters are obtained. Then, previous experimental results are compiled; crater depth normalized by projectile diameter and the ratio of projectile and target densities is plotted for glass, plastic, and metal projectiles and metal, rock, ice, foam, sheet-stack, and aerogel targets. The trends of the data are consistent with the relations in the extreme cases.     

Spiral column configuration for protein separation by high-speed countercurrent chromatography

Retention of the stationary phase of aqueous–aqueous polymer phase systems is improved by a spiral column configuration which utilizes the radially acting centrifugal force along the spiral pitch to retain the heavier phase in the outer portion and the lighter phase in the inner portion of the spiral channel. For the separation of proteins which has low mass transfer rates, the system needs further modification of the separation channel to interrupt the laminar flow and enhance mixing of the two phases.     

Transformation of epithelial Madin-Darby canine kidney cells with p60(v-src) induces expression of membrane-type 1 matrix metalloproteinase and invasiveness

Membrane-type 1 matrix metalloproteinase (MT1-MMP) is expressed both in carcinoma cells and in surrounding stromal fibroblasts. MT1-MMP localizes to the surface of tumor cells and is thought to play an important role in tumor invasion. To analyze the mechanism of MT1-MMP gene expression in epithelial tumor cells, the dog kidney epithelial cell line Madin-Darby canine kidney (MDCK) was transformed by oncogenes, including v-src, and expression of MT1-MMP was examined. Transformation of MDCK cells with v-src resulted in loss of cell-to-cell contacts and morphological change. Expression of MT1-MMP in v-src-transformed cells was identified by Northern and Western blotting. Gelatin zymography analysis showed that progelatinase A in the culture medium was processed from latent to activated form by MDCK cells transformed with v-src. The MDCK cells transformed by v-src were tumorigenic in the subcutis (ectopic) and kidney (orthotopic) of nude mice and spontaneously metastasized to the lung after orthotopic implantation. These results suggest that MT1-MMP induced by v-src transformation may promote invasiveness of transformed cells.     

Statistical interferometry based on a fully developed speckle field: an experimental demonstration with noise analysis

A novel interferometric method named statistical interferometry is proposed and studied. In the method, in contrast to the conventional deterministic interferometry, the complete randomness of the two interfering light fields, i.e., the random interference of the fully developed speckle fields, plays an essential role and is used as a standard of phase in a statistical sense. Preliminary experiments were conducted to verify the validity of the method, followed by a computer simulation. As an experimental result, the accuracy of the measurements of an out-of-plane displacement was confirmed up to lambda/800 by comparison with the heterodyne interferometer. The method has the advantage of simplicity of the optical system required, while at the same time providing high accuracy.     

Usefulness of Permanent Power Fuse in Control Centers with Molded Case Circuit Breakers

The increase in electric power consumption in industry has led to the development of modern distribution systems such as control centers having high kVA ratings and high prospective fault current. In such a situation, the improvement of the system usefulness such as reliability and cost effectiveness is the essential requirement. An index is presented to evaluate the system usefulness using the cost effectiveness for fault protection in a system of given bank kVA. The index is estimated on four different system structures of control centers, including one which utilizes Permanent Power Fuses (PPF). It is presented that the PPF combined with molded case circuit breaker in main circuit effectively improves the cost effectiveness in control centers with high fault current. Operating principles of the PPF and the control center utilizing the PPF are briefly outlined.     

The Role of HECT-Type E3 Ligase in the Development of Cardiac Disease

Despite advances in medicine, cardiac disease remains an increasing health problem associated with a high mortality rate. Maladaptive cardiac remodeling, such as cardiac hypertrophy and fibrosis, is a risk factor for heart failure; therefore, it is critical to identify new therapeutic targets. Failing heart is reported to be associated with hyper-ubiquitylation and impairment of the ubiquitin–proteasome system, indicating an importance of ubiquitylation in the development of cardiac disease. Ubiquitylation is a post-translational modification that plays a pivotal role in protein function and degradation. In 1995, homologous to E6AP C-terminus (HECT) type E3 ligases were discovered. E3 ligases are key enzymes in ubiquitylation and are classified into three families: really interesting new genes (RING), HECT, and RING-between-RINGs (RBRs). Moreover, 28 HECT-type E3 ligases have been identified in human beings. It is well conserved in evolution and is characterized by the direct attachment of ubiquitin to substrates. HECT-type E3 ligase is reported to be involved in a wide range of human diseases and health. The role of HECT-type E3 ligases in the development of cardiac diseases has been uncovered in the last decade. There are only a few review articles summarizing recent advancements regarding HECT-type E3 ligase in the field of cardiac disease. This study focused on cardiac remodeling and described the role of HECT-type E3 ligases in the development of cardiac disease. Moreover, this study revealed that the current knowledge could be exploited for the development of new clinical therapies.     

Collapse of micrometer-sized cavitation bubbles near a rigid boundary

The interaction of cavitation bubbles with a rigid boundary and its dependence on the distance between bubble and boundary is investigated experimentally. Individual cavitation bubbles, with a maximum radius of 150?μm, are generated by using pulsed high-intensity focused ultrasound. Observations are made with high-speed photography with framing rates of up to 200?million frames per second and exposure time of 5?ns, and the spatial resolution is in the order of a few micrometers. The significant parameter of this study is the non-dimensional stand-off parameter, γ, defined as the distance between the ultrasound focus and the rigid boundary scaled by the maximum bubble radius. Both the velocity of the liquid jet developed during bubble collapse and the maximum pressure of the shock wave emitted during bubble rebound show a minimum for γ?≈?1 and a constant value for γ?>?3. The maximum jet velocity is slightly smaller than the corresponding values obtained in the case of millimeter-sized bubbles and ranges from 80?m/s (at γ?≈?1) to 130?m/s (for γ?>?3). No jet formation was observed for γ?>?3. The shock wave pressure, measured at a distance of 5?mm from the emission center, ranges from 0.2?MPa (at γ?≈?1) to 0.65?MPa (for γ?>?3). These values are an order of magnitude smaller than those obtained in the case of millimeter-sized bubbles. The shock wave duration is almost independent of γ at a value of about 75?ns. For large γ values (γ?>?3), a large percentage of the bubble energy (up to 60?%) is transformed into the mechanical energy of the shock wave emitted during bubble rebound but, for γ?≈?1, the conversion efficiency decreases to 30?%. Independent of the relative distance between bubble and rigid boundary, the shock pressure decays proportionally to r ^?1 with increasing distance r from the emission center. The results are discussed with respect to cavitation damage and collateral effects in pulsed high-intensity focused ultrasound surgery.