A redundant multivalued logic for a 10-Gb/s CMOS demultiplexer IC

A redundant multivalued logic is proposed for high-speed communication ICs. In this logic, serial binary data are received and converted into parallel redundant multivalued data. Then they are restored into parallel binary data. Because of the multivalued data conversion, this logic makes it possible to achieve higher operating speeds than that of a conventional binary logic. Using this logic, a 1:4 demultiplexer (DEMUX, serial-parallel converter) IC was fabricated using a 0.18-/spl mu/m CMOS process. The IC achieved an operating speed of 10 Gb/s with a supply voltage of only 1.3 V and with power consumption of 38 mW. This logic may achieve CMOS communication ICs with an operating speed several times greater than 10 Gb/s.     

Augmentation of boiling heat transfer from horizontal cylinder to liquid by movable particles

This paper presents a series of experimental results on a passive augmentation technique of boiling heat transfer by supplying solid particles in liquid. A cylindrical heater 0.88 mm in diameter is placed in saturated water, in which a lot of mobile particles exist, and the nucleate and film boiling heat transfer characteristics are measured. Particle materials used were alumina, glass, and porous alumina, and the diameter ranged from 0.3 mm to 2.5 mm. Particles are fluidized by the occurrence of boiling without any additive power, and the heat transfer is augmented. The maximum augmentation ratio obtained in this experiment reaches about ten times the heat transfer coefficient obtained in liquid alone. The augmentation ratio is mainly affected by the particle material, diameter, and the height of the particle bed set at no boiling condition. The augmentation mechanism is discussed on the basis of the experimental results. © 2001 Scripta Technica, Heat Trans Asian Res, 31(1): 28–41, 2002     

ASYMPTOTIC PROPERTIES OF THE SAMPLE AUTOCORRELATIONS AND PARTIAL AUTOCORRELATIONS OF A MULTIPLICATIVE ARIMA PROCESS

Abstract. We shall investigate the asymptotic behaviour of the sample autocorrelations and partial autocorrelations of a multiplicative ARIMA process and derive their limiting distributions. Some simulations are presented to illustrate the results obtained.     

A general framework for debugging

The state of the art of debugging is examined. A debugged process model that serves as the basis of a general debugging framework is described. The relationship of the model to traditional debugging processes and support tools is discussed. A minimal set of requirements for a general debugging framework is described in terms of both the theory behind debugging methodologies and the support tools. An execution monitor, Eden, that serves as a debugging tool within this general framework is described     

Preparation and antibacterial activity of novel fluoroalkyl end-capped oligomers/silica nanocomposites-encapsulated low molecular biocides

Fluoroalkyl end-capped N-(1,1-dimethyl-3-oxobutyl)acrylamide oligomer [R_F-(DOBAA) _n -R_F] reacted with tetraethoxysilane (TEOS) and silica nanoparticles in the presence of low-molecular weight biocides such as hibitane, hinokitiol, and hinokioil under alkaline conditions to afford R_F-(DOBAA) _n -R_F/silica nanocomposites-encapsulated these biocides in excellent to moderate isolated yields. Fluoroalkyl end-capped N,N-dimethylacrylamide oligomer [R_F-(DMAA) _n -R_F] and acrylic acid oligomer [R_F-(ACA) _n -R_F]/silica nanocomposites-encapsulated hibitane were obtained under similar conditions. Dynamic light scattering measurements showed that the size of these fluorinated nanocomposites-encapsulated biocides thus obtained is nanometer size-controlled. Additionally, these fluorinated nanocomposites were shown to have a good dispersibility and stability in methanol and water. Of particular interest, these fluorinated nanocomposites-encapsulated biocides were found to have a good antibacterial activity against Staphylococcus aureus, and these nanocomposites were applied to the surface modification of traditional organic polymers such as poly(methyl methacrylate).     

Real-time measurement of pointing action by using DSP

This paper presents an approach of measuring in real-time the vector of finger that is pointing to an object. DSP is used in the operation processing unit in order to do the real-time processing. The steps include the extraction of flesh-colored regions from an image, the labeling of the flesh-colored regions, and the detection of two characteristic positions on the finger so that the direction that the finger is pointing at will be calculated. The entire process takes about 29 msec, which makes it possible to have the frame rate of 34 fps. With this frame rate, this measurement approach is considered real-time and promising to be merged into other application systems. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

High-efficiency finishing process for metal mold by large-area electron beam irradiation

A new finishing process for metal molds by large-area electron beam (EB) irradiation is proposed in this study. In the large-area EB irradiation equipment used here, an EB with high-energy density is irradiated without focusing the beam, and so the EB with a maximum diameter of 60 mm can be used for melting or evaporating metal surface instantly. Experimental results show that the surface roughness decreases from 6 μmRz to less than 1 μmRz in just a few minutes under proper machining conditions. The corrosion resistance of metal mold surface also could be greatly improved by large-area EB irradiation. Furthermore, the surface roughness of tilting surface close to 90° could be well improved. Therefore, large-area EB irradiation method has a possibility to become a high-efficiency finishing process for metal molds.     

Evaluation of intraductal ultrasonography in the diagnosis of pancreatic cancer

An intraductal ultrasound (IDUS) probe which is inserted via the papilla into the main pancreatic duct (MPD) was evaluated in the diagnosis of 20 patients with pancreatic cancer. The examination was successfully performed with the probe in 17 of the patients (85%). Due to its high frequency (30 MHz) the probe only allowed visualization of the ductal wall and the immediate periductal vicinity (up to about 10 mm). In 15 of the 20 patients the tumors were surgically resected and IDUS scanning was also performed in vitro on the resection specimens, the results being compared to those of histopathological examination. Of these 15 patients, 13 were found to have ductal adenocarcinomas and all but one had been unequivocally diagnosed as having such by ultrasonography (US), computed tomography (CT), endoscopic retrograde cholangiopancreatography (ERCP) and endoscopic ultrasonography (EUS). IDUS showed an echorich area (corresponding to cancerous canaliculi on histopathological examination), surrounded by an echopoor area (abundant stroma). This pattern was classified as type I. In two patients with intraductal papillary carcinomas in whom a conclusive diagnosis was not established on US, CT, EUS or ERCP, IDUS showed tumorous tissue with an inhomogeneous echopattern outside (type II) or within (type III) the duct. These results show that IDUS offers valuable diagnostic information complementary to ERCP especially in cases of intraductal papillary tumors. Whether the high resolution imaging of the duct and the paraductal tissue can be used to differentiate between the different forms of pancreatic lesions (inflammation, neoplasms) has to be investigated further.     

Immunochemical characterization of anti-H monoclonal antibodies obtained from a mouse immunized with human saliva

Three IgM class anti-H monoclonal antibodies (1E3, 1E5 and 3H1) were obtained from a BALB/c mouse immunized with human O type saliva. These antibodies were found to agglutinate red cells from O group and A and B subgroups but not from Bombay and para-Bombay individuals whose H antigen was barely detected by anti-H reagents. The agglutination reactions of these antibodies were inhibited by H antigens from human tissues. It was also demonstrated that both 1E3 and 3H1 reacted with H disaccharide (Fuc alpha 1-->2Gal beta), H type 1 (Fuc alpha 1-->2Gal beta 1-->3GlcNAc beta), H type 2 (Fuc alpha 1-->2Gal beta 1-->4GlcNAc beta), H type 3 (Fuc alpha 1-->2Gal beta 1-->3GalNAc alpha) and H type 4 (Fuc alpha 1-->2Gal beta 1-->3GalNAc beta) but not with Lea (Gal beta 1-->3[Fuc alpha 1-->4]GlcNAc beta), Leb (Fuc alpha 1-->2Gal beta 1-->3[Fuc alpha 1-->4]GlcNAc beta), X (Gal beta 1-->4[Fuc alpha-->3]GlcNAc beta) or Y (Fuc alpha 1-->2Gal beta 1-->4[Fuc alpha 1-->3]GlcNAc beta). On the other hand, 1E5 was found to react with H type 1, H type 2, Leb and Y. Because of the unique reactivities against various fucosyl linkages these monoclonal antibodies could be useful not only as anti-H reagents but also as reagents for the structural analysis of fucosylated glycoconjugates.