An online technique for monitoring the insulation condition of AC machine stator windings

A novel online technique for monitoring the insulation condition of ac machine stator windings is proposed in this paper. The concept is to measure the differential leakage currents of each phase winding from the terminal box in a noninvasive manner to assess the insulation condition during motor operation. The conventional differential CTs used for phase fault protection can be replaced with high performance current sensors to measure the leakage current with higher accuracy. Indicators for insulation condition such as the capacitance and dissipation factor are calculated based on the measurements to provide a low cost solution for online insulation condition assessment. A simplified online insulation system model is derived for analysis and interpretation of the measured data. Experimental results on a 15-hp induction motor under simulated insulation degradation conditions show that the proposed technique is a very sensitive method capable of detecting incipient signs of insulation degradation.     

Experimental and numerical investigation of a phase change material: Thermal-energy storage and release

The application of phase change materials (PCMs) for solar thermal-energy storage capacities has received considerable attention in recent years due to their large storage capacity and isothermal nature of the storage process. This study deals with the comparison of numerical and experimental results for a PCM conditioned in a parallelepipedic polyefin envelope to be used in passive solar walls. The experimental results were obtained by use of a genuine set-up involving heat flux sensors and thermocouples mounted on two vertical aluminium exchanger plates squeezing the samples. Numerical predictions were obtained with a custom one-dimensional Fortran code and a two-dimensional use of Fluent. Both methods showed a very good agreement with experimental observations for the melting process (?5%). However during solidification, both numerical codes failed to predict the phase change process accurately, the maximal relative error was as high as 57% (with an average of 8%).     

Thermal modelling of the high temperature treatment of wood based on Luikov's approach

A 3D, unsteady‐state mathematical model was used to simulate the behaviour of wood during high temperature treatment. The model is based on Luikov's approach and solves a set of coupled heat and mass transfer equations. Using the model, the temperature and moisture content profiles of wood were predicted as a function of time for different heating rates. Parallel to the modelling study, an experimental study was carried out using small birch samples. The samples were subjected to high temperature treatment in a thermogravimetric system under different operating conditions. The experimental results and the model predictions were found to be in good agreement. The results show that the distributions of temperature and moisture content are influenced appreciably by the heating rate and the initial moisture content. Copyright © 2005 John Wiley & Sons, Ltd.     

Micro extrusion of innovative alumina pastes based on aqueous solvent and eco-friendly binder

The aim of this work is to develop the micro-extrusion process with an innovative approach linked to respect for the principles of green chemistry. Alumina pastes are prepared in an aqueous medium with psyllium as a natural binder, which is not derived from the petrochemical industry. The challenge is to obtain a concentrated system which is suitable for the micro-extrusion process and which ensures satisfactory structural and mechanical properties of the final parts.The manufacturing of alumina networks is achieved by using the micro-extrusion shaping process consisting of an XYZ displacement platform and a homemade extrusion head. The nozzle diameter is equal to 400?μm. The rheological behavior of the paste is studied as well as its capability to be extruded. The green parts are consolidated by heat treatment at 1600?°C. Their microstructural characteristics have been studied. Final density equal to 98% has been obtained.     

New Magnetic Phase Transitions in the Tetragonal Compounds PrBa2Cu3O6+x at Low Temperature

The anomalous magnetic properties of Pr ions in the PrBa₂Cu₃O_6+x system are investigated at low temperature. Measurements of the specific heat C _P(T) and the magnetic susceptibility χ(T) are performed on ceramic samples in the tetragonal structure with x=0.44 and x=0. Two new magnetic transitions are observed below the Néel temperature of the Pr antiferromagnetic ordering $T_{\mathrm{N}}^{\mathrm{Pr}} \sim 9\mbox{--}10~\mathrm{K}$ . The first one is observed at the low-critical temperature T _cr～4–5?K and the second one is observed at $T_{2}^{\mathrm{Pr}\text{--}\mathrm{Cu}} \sim 6\mbox{--}7~\mathrm{K}$ , respectively. Assuming that ΔC _P(T) can be used to represent the Pr contribution to the specific heat C _P(T), the data are well fitted for T<T _cr by using the development of ΔC _P(T)/T=ΔA(T ²)^?3/2 +Δγ+M(T ²) ¹ +m(T ²) ² . The values of the electronic coefficient Δγ are found much lower than all previous results obtained in compounds of the orthorhombic structure, and this is, in good agreement with the insulating character of our non-superconducting samples. The high values obtained for the coefficient M, permits us to confirm the existence of strong Pr–Pr exchange interactions. Some non-linear effects attributed to the values of the coefficient m are revealed and discussed in terms of the previous Pr–Cu coupling with a spin reorientation phase transition of both spin sublattices around $T_{2}^{\mathrm{Pr}\text{--}\mathrm{Cu}}$ . The appearance of a weak ferromagnetic tendency in the magnetic susceptibility analysis below T _cr, could be associated with the reordering of the Pr subsystem.     

Long-Term Effects of Neural Precursor Cell Transplantation on Secondary Injury Processes and Functional Recovery after Severe Cervical Contusion-Compression Spinal Cord Injury

Cervical spinal cord injury (SCI) remains a devastating event without adequate treatment options despite decades of research. In this context, the usefulness of common preclinical SCI models has been criticized. We, therefore, aimed to use a clinically relevant animal model of severe cervical SCI to assess the long-term effects of neural precursor cell (NPC) transplantation on secondary injury processes and functional recovery. To this end, we performed a clip contusion-compression injury at the C6 level in 40 female Wistar rats and a sham surgery in 10 female Wistar rats. NPCs, isolated from the subventricular zone of green fluorescent protein (GFP) expressing transgenic rat embryos, were transplanted ten days after the injury. Functional recovery was assessed weekly, and FluoroGold (FG) retrograde fiber-labeling, as well as manganese-enhanced magnetic resonance imaging (MEMRI), were performed prior to the sacrifice of the animals eight weeks after SCI. After cryosectioning of the spinal cords, immunofluorescence staining was conducted. Results were compared between the treatment groups (NPC, Vehicle, Sham) and statistically analyzed (p < 0.05 was considered significant). Despite the severity of the injury, leading to substantial morbidity and mortality during the experiment, long-term survival of the engrafted NPCs with a predominant differentiation into oligodendrocytes could be observed after eight weeks. While myelination of the injured spinal cord was not significantly improved, NPC treated animals showed a significant increase of intact perilesional motor neurons and preserved spinal tracts compared to untreated Vehicle animals. These findings were associated with enhanced preservation of intact spinal cord tissue. However, reactive astrogliosis and inflammation where not significantly reduced by the NPC-treatment. While differences in the Basso–Beattie–Bresnahan (BBB) score and the Gridwalk test remained insignificant, animals in the NPC group performed significantly better in the more objective CatWalk XT gait analysis, suggesting some beneficial effects of the engrafted NPCs on the functional recovery after severe cervical SCI.     

Multi-mesh and adaptivity in 3D shape optimization

The major drawback in three-dimensional shape optimization is the excessive computational time needed in spite of the use of parametric-type design variables. Therefore, in addition to parametrization we suggest the use of several meshing levels to speed up the obtention of the optimal solution and to check the precision of the analysis by an error estimation. The combination of parametrization, multi-mesh and error estimation allows us to deal efficiently with three-dimensional shape optimization problems.     

Double-Diffusive Natural Convection in a Mixture-Filled Cavity with Walls' Opposite Temperatures and Concentrations

ABSTRACT

This paper deals with natural convection flows evolving inside an ended and differentially heated cavity, which is filled either with an air or an air–CO₂ mixture. The investigation was conducted through the laminar regime to analyze buoyancy ratio changes' effect on heat and mass transfers both in aiding and opposing flows. The thermal Rayleigh number was varied from 10³ to 10⁷. Streamlines, isotherms, iso-concentrations, and local and average Nusselt and Sherwood numbers are provided to demonstrate the convective flow induced. The governing equations are solved by finite volume method using SIMPLEC algorithm to handle the pressure–velocity coupling. The buoyancy ratio effect on dynamic, thermal, and mass fields is noteworthy, exhibiting both the competition between thermosolutal forces and fields' stratification. From the results, it turned out that, in general, when the buoyancy ratio is: (1) positive, thermosolutal buoyancy forces are cooperative, (2) nil, solutal buoyancy forces are weak and the flow is merely thermoconvective, (3) negative and greater than ?1, buoyancy effects are competing and thermal convection dominates, (4) ?1, buoyancy effects are canceled and heat and mass transfers are driven only by diffusion, and (5) less than ?1, buoyancy forces compete with a dominant solutal convection.     

Numerical Simulation of Vacuum Drying by Luikov's Equations

A two-dimensional mathematical model was developed to simulate coupled heat and mass transfer in apple under vacuum drying. Luikov's equations are the governing equations in analyzing heat and mass diffusion problems for capillary-porous bodies. The model considers temperature- and moisture-dependent material properties. The aim of this study is to analyze the influence of some of the most important operating variables, in particular, pressure and temperature of drying air, on the drying of apple. The resulting system of unsteady-state partial differential equations has been solved by a commercial finite element method (FEM) package called FEMLAB (COMSOL AB, Stockholm, Sweden). Simulations, carried out in different drying conditions, showed that temperature is more effective than air pressure in determining the drying rate. A parametric study was also carried out to determine the effects of heat and mass transfer coefficients on temperature and moisture content distributions inside apple during vacuum drying. A comparison between the theoretical predictions and a set of experimental results reported in the literature showed very good agreement, especially during the first 4,200 s, when experimental data and theoretical predictions overlapped and relative errors never exceeded 2%.     

Essential Oil and Phenolic Compounds of Artemisia herba-alba (Asso.): Composition,Antioxidant, Antiacetylcholinesterase,and Antibacterial Activities

Total phenols, flavonoids, flavonols, and flavanols of the methanolic extract of the aerial part of Artemisia herba-alba were determined. The extract was analyzed by liquid chromatography with photodiode array coupled with electrospray ionisation mass spectrometry and allowed to identify of 10 phenolic compounds. Apigenin-6-C-glycosyl flavonoids and caffeoylquinic acids were identified. Chlorogenic acid and 1,4 dicaffeoylquinic acid being the major constituents. The essential oil obtained by hydrodistillation was analyzed by gas chromatography–mass spectrometry. Twenty-three compounds, representing 97.8% of the total oil, were identified. The most abundant components were β-thujone (41.9%), α-thujone (18.4%), and camphor (13.2%). Methanolic extract and essential oil exhibited a considerable antioxidant activity as evaluated by 2,2-diphenyl-pycrilhydrazil hydrate scavenging activity, reducing power, β-carotene bleaching test, and chelating ability. The methanolic extract was found to be more efficient, while the essential oil exhibited the highest acetylcholinesterase inhibitory activity. Analysis of the antibacterial activity showed that A. herba-alba methanolic extract and essential oil are efficient against gram positive and gram negative bacteria.