Applicability of Wireless Sensor Networks in Precision Agriculture: A Review

Wireless Personal Communications - Data security is currently become a serious concern in wireless communication system for both the users and providers. Without a secure medium, the data...     

Features of ultrasonic wave propagation to identify defects in composite materials modelled by finite element method

A two-dimensional plane strain finite element model with absorbing boundary condition has been developed to investigate the ultrasonic wave propagation in isotropic and orthotropic media. It is capable of simulating the experimental pulse echo technique to obtain A-scan data, when a short duration pulse is transmitted into a domain with or without a flaw. The flaw can either be a crack or an inclusion of different material such as a Teflon insert or a resin rich zone. After performing FFT on the A-scan data, frequency domain feature analysis is done. The study provides a guideline regarding the suitability of certain harmonics sensitive to certain types of flaw. The simulation shows other important artifacts of wave propagation such as mode conversion and scattering due to the presence of flaws.     

Structural and electrical measurements of CdZnSe composite

TheI—Vcharacterization and the electrical resistivity of selenium rich Se₈₅Cd_15-xZn_x (x = 0, 3, 7, 11 and 15) system at room temperature have been studied. Samples were obtained using melt cooling technique. So prepared samples were then characterized in terms of their crystal structure and lattice parameter using X-ray diffraction method. The materials were found to be poly crystalline in nature, having zinc blend structure over the whole range of zinc concentration. The measurements ofI—V bdcharacteristics have been carried out at different temperatures from room to 140°C. The electrical resistivity of the samples with composition at room temperature has been found to vary between maximum 2.7 x 10⁸ Ωm and minimum 7.3 x 10⁵ Ωm and shows a maximum at 3 at. wt.% of Zn. The carrier activation energy of the samples with composition has also been determined and found to vary from 0.026 eV to 0.111 eV.     

Deceleration of a porous rotating disk in a viscous fluid

The flow due to a rotating disk decelerating with an angular velocity inversely proportional to time with either surface suction (or injection) which again varies with time is investigated. The unsteady Navier-Stokes equations are transformed to non-linear ordinary differential equations using similarity transformations. The resulting equations are solved numerically using a globally convergent homotopy method. The flow depends on two non-dimensional parameters, namely an unsteadiness parameter $\text{S}$ and a suction (or injection) parameter $\text{A}$. Some interesting numerical results are presented graphically and discussed.     

Geomorphic diversity as a river management tool and its application to the Ganga River,India

Understanding of geomorphic processes and the determination of geomorphic diversity in catchments are prerequisites for the sustainable rehabilitation of river systems and for reach‐scale assessment of river health. The Ganga River system in India is a large, complex system consisting of several long tributaries, some >1,000 km, originating from 2 distinct hinterlands—the Himalaya to the north and the cratons to the south. Traversing through a diverse climatic regime across the Plain and through precipitation zones ranging from 600 mm/year near Delhi to 1,200 mm/year in the eastern plains, the Ganga River system has formed very diverse landform assemblages in 3 major geomorphic domains. We have recognized 10 different river classes for the trunk river from Gangotri (source) to Farakka (upstream of its confluence with the Brahmaputra) based on (a) landscape setting, (b) channel and active floodplain properties, and (c) channel planform parameters. The mountainous stretch is characterized by steep valleys and bedrock channels and is dominated by large‐scale sediment production and transport through hill slope processes. The alluvial part of the river is characterized by 8 different river classes of varying reach lengths (60–300 km) many of which show sharp transitions in landscape setting. We have highlighted the application of this approach for the assessment of habitat suitability, environmental flows, and flood risk all of which have been significantly modified during the last few decades due to large‐scale anthropogenic disturbances. We suggest that the diversity embedded in this geomorphic framework can be useful for developing a sustainable river management programme to “work with” the contemporary character and behaviour of rivers.     

Short‐beam three‐point bend test study in syntactic foam. Part III: Effects of interface modification on strength and fractographic features

Syntactic foam slabs having uncoated microballoons and paraffin oil surface‐treated microballoons were fabricated and tested for short‐beam three‐point bend test. The work points to the role of paraffin oil coating first weakening the interface between the microballoons and the matrix and hence lowering the efficiency of load transfer from matrix to the fillers (i.e., microballoons). This led to an overall decrement of 71% in the experimentally measured strength value compared to the deduced value for uncoated microballoons' specimens. The large strengths for uncoated microballoons specimens can be traced to the presence of the curvilinear marks in the matrix that, incidentally, are absent in the case of paraffin oil coated specimens. These observations are revealed distinctly in the microscopy of test‐failed specimens. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 687–693, 2005     

Magnetoelectrolysis with rough cathode surfaces

In coupled electric/magnetic fields the upward drift of the apparent current density at a rough cathode is increased in proportion to the strength of the imposed magnetic field. The extent of enhancement becomes relatively less as the magnetohydrodynamic body force in the electrolyte becomes larger.     

The effect of a magnetic field on electrolyte conductivity

A simple theory of electrolyte conductance is coupled electric/magnetic fields is presented. The procedure for estimating the relative importance of Hall conductivity is quicker than others hitherto proposed.     

Short beam three point bend tests in syntactic foams. Part I: Microscopic characterization of the failure zones

Scanning Electron Microscopic (SEM) studies were carried out on the failure surface of syntactic foam material tested in a short beam three point bend test (SBT) by employing 21 × 15 × 3 mm³ dimension bearing specimens. The syntactic foams were fabricated using glass microballoons in epoxy binder. The failure of the tensile, compression, and shear dominated regions were studied by SEM at different magnifications. The tensile region had characteristic features, such as partial debonding of the microballoons from the matrix and cracking of glass microballoons, apart from matrix cracking and some river pattern features. The compression side was characterized by crushing and collapsing of microballoons, resulting in accumulation of debris with no apparent river pattern for matrix‐rich regions. The midway positions of the SBT failed surface comprised of deformation bands in the matrix and occasional debonding of microballoons. The morphology recorded in the tensile and compression regions corroborated well with the results obtained on these foam samples in those specimens that were subjected to pure uniaxial tension and compression, respectively. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 673–679, 2005