High-performance polymer alloys of polybenzoxazine and bismaleimide

Two series of high-performance polymer alloys were prepared by mixing typical benzoxine monomers, 3-phenyl-3,4-dihydro-2H-1,3-benzoxazine (P-a) or 6,6-(1-methylethyliden)-bis-(3,4-dihydro-3-phenyl-2H-1,3-benzoxazine) (B-a), with a typical bismaleimide, 4,4-bismaleimidodiphenyl methane by various ratios followed by thermal treatment up to 240 °C. DSC and IR of the alloys were examined to follow the curing reaction. These analyses showed that the obtained polymer alloys are AB co-cross-linked polymer networks through the formation of ether linkage between the hydroxyl group of polybenoxazine and the double bond of bismaleimide. Viscoelastic analysis and softening temperature measurement revealed that the polymer alloys have much higher glass transition temperatures than those of each homopolymer. The thermal stability also increased with the increase of bismaleimide content as evidenced by TGA.     

Heavy arsenic doping of silicon grown by atmospheric pressure selective epitaxial chemical vapor deposition

Selective epitaxial Si with a high arsenic concentration of 2.2×10¹⁹ atoms/cm³ was deposited at a high growth rate of 3.3 nm/min under atmospheric pressure. It was confirmed that this method had excellent selectivity and produced films having good crystalline quality, abrupt dopant profiles at the interfaces, and smooth surfaces. The growth mechanism is discussed in terms of the relationship between the effects of arsenic surface segregation and etching by hydrogen chloride.     

A new non-random chromosomal translocation t(3;6)(q27;p21.3) associated with BCL6 rearrangement in two patients with non-Hodgkin's lymphoma

We describe two cases of non-Hodgkin's lymphoma associated with t(3;6)(q27;p21.3) and BCL6 rearrangement. The first case was in a 78-year old woman, whose performance status (PS) was 1, the serum lactate dehydrogenase (LDH) level was elevated, and the Ann Arbor stage was IIIA with no extra nodal lymphomatous site. The pathological diagnosis from a biopsy of the inguinal lymph node was 'malignant lymphoma (ML), follicular, small cleaved' according to the Working Formulation. Complete remission was achieved. Although she had relapse in 1992, remission was obtained again. The second case was in a 62-year old man, whose PS was 1, the serum LDH was normal, and Ann Arbor stage was IVA with the involvement of the small intestine. Histological diagnosis of the cervical lymph node was 'ML, diffuse, large cell'. Complete remission was obtained without relapse. The 3q27 translocations, found in 20-30% of non-Hodgkin's lymphoma, are unique in having multiple chromosomal translocation partners. Chromosome band 6p21.3 is one of these partner sites that may be the site of a novel gene. The two cases presented here show that this translocation is a non-random chromosomal change involving 3q27 and BCL6. Since t(3;6) was the sole karyotypic abnormality in one case, this translocation may play a role in lymphomagenesis.     

The effect of inorganic additives on the formation,composition, and combustion of cellulosic char

At temperature above 300°C the glycosyl units of cellulose are simultaneously depolymerized to a tar and decomposed to a char by evolution of H₂O, CO, and CO₂. When the glycosyl units are depleted, a stable char is formed containing about 30% aliphatic and 70% aromatic components. The aliphatic component is formed first, but on further heating is converted to polycyclic aromatic structures. The chars formed at lower temperatures are more combustible because the aliphatic component of the char is highly pyrophoric and is oxidized almost at the same temperature at which it is formed (～360°C). The aromatic component, however, is less reactive and is oxidized at ～520°C. Consequently, the chars formed at higher temperatures are less combustible. It has been shown that (NH₄)₂HPO₄, which is a well-known flame retardant and smoldering inhibitor, lowers the pyrolysis temperature and increases the char yield by accelerating the decomposition reactions. This affects the composition of the intermediate chars but the final products have about the same composition irrespective of additives. (NH₄)₂HPO₄ also lowers the rate of oxidation of the aromatic component and the corresponding heat release. NaCl, which is an enhancer of smoldering combustion, has a slight stabilizing effect on pyrolysis of cellulose. It lowers the oxidation temperature of the aromatic component and dramatically increases its rate. The corresponding heat release is also increased due to complete oxidation to CO₂. The rate of oxidation calculated from the dynamic thermal analysis data is more than tripled by NaCl and significantly reduced by (NH₄)₂HPO₄.     

Reliability and mechanical durability tests of flexible OLED with ALD coating

To improve the reliability and mechanical durability of a flexible organic light‐emitting diode display, the entire flexible display is coated with an aluminum oxide film by atomic layer deposition (ALD). Because the step coverage of ALD is excellent, the AlO_x film was deposited not only on the front and back surfaces but also on the side surfaces of the display. A high‐temperature and high‐humidity preservation test, repetitive bending tests, and a pencil hardness test were conducted on the flexible display with ALD‐AlO_x coating. The display survived 500 h of a 65°C, 95% preservation test, endured a 100,000‐time repetitive bending test with a curvature radius of 4 mm, and was found to have a pencil hardness of 4H.     

Computational design of iris folding patterns

Computational Visual Media - Iris folding is an art-form consisting of layered strips of paper, forming a spiral pattern behind an aperture, which can be used to make cards and gift tags. This...     

Polytetrafluoroethylene processing characteristics using high-energy X-ray

Polytetrafluoroethylene (PTFE) microstructures’ processing characteristics using X-ray photo dcomposition and desorption are studied in the highest energy region (2 keV to >12 keV). While the exposed surface states are seen melting and boiling from the remaining bubble structure of the irradiated surface, basic photochemistry of PTFE is also same as previous reports and high-aspect ratio structures are successfully formed. We developed new Ni stencil electroformed stencil masks and successfully fabricated first and practical example of PTFE micro fluidic parts. The characteristics of fabricated micro fluidic parts, a PTFE fluid filter for vertical fluid flow operation which works as passive valve, agreed with the calculated results. This suggests that the accuracy of patterning is adequate to apply this technique to fabricate microfluidic parts and other various microparts.     

Enzyme-linked immunosorvent assay using vertical microreactor stack with microbeads

The advantages of vertical microreactor stack with three-dimensional (3D) structure for immunoassay are discussed. The vertical microreactor stack uses vertical fluid flow operation with multifunctional fluid filters. The multi function of fluid filter is very effective for micromixing and passive valve operation. The mechanism of micromixing is discussed by using computational fluid dynamics (CFD), and we know that the mixing mechanism based on Coanda effect. To evaluate the micromixing performance of fluid filter, we demonstrated enzyme reaction with unique repeat mixing operation. As the results, we proved that the fluid filter has very effective mixing performance. The detection limit, which demonstrated by competition enzyme-linked immunosorvent assay (ELISA), is comparable with recommended detection limit, which suggested by Japanese ministry for the environment.     

High efficiency mixing by the use of cross-linked micro capillary fluid filter

A novel type passive mixing device that causes the three-dimensional flow was proposed. This mixer consists of the integrated capillary bundle structure. And the capillaries ware cross-linked each other. So it is called cross-linked micro capillary filter. The mixing effect of the cross-linked micro capillary filter was calculated by the computational fluid dynamics (CFD). The fluid behaviour in the fine three-dimensional structure could be analysed by the use of CFD. In the result of CFD calculation, the cross-linked micro capillary filter estimated high mixing effect. Moreover, the mixing efficiency was become higher by change the cross-linked form. The calculation result was decided the form of the cross-linked micro capillary filter. And this filter was fabricated by application of the Deep X-ray lithography. To form the cross-linked capillary, it was operated twice exposures. In these exposures, respectively the exposure stage was tilted to difference angle. The cross-linked capillary filter fabricated in this way was applied to vertical fluid flow operation. This cross-linked capillary filter could hold and transmit the fluid by the switchover of in impressed pressure. Herewith the cross-linked micro capillary filter showed availability as high efficiency mixing device.     

Revolving Vernier Mechanism Controls Size of Linear Homomultimer

A new kind of the Vernier mechanism that is able to control the size of linear assembly of DNA origami nanostructures is proposed. The mechanism is realized by mechanical design of DNA origami, which consists of a hollow cylinder and a rotatable shaft in it connected through the same scaffold. This nanostructure stacks with each other by the shape complementarity at its top and bottom surfaces of the cylinder, while the number of stacking is limited by twisting angle of the shaft. Experiments have shown that the size distribution of multimeric assembly of the origami depends on the twisting angle of the shaft; the average lengths of the multimer are decamer, hexamer, and tetramer for 0°, 10°, and 20° twist, respectively. In summary, it is possible to affect the number of polymerization by adjusting the precise shape and movability of a molecular structure.