Development of flexible organic light‐emitting diode on barrier film and roll‐to‐roll manufacturing

To come out with a successful organic light‐emitting diode (OLED) lighting business, it is very important to have clear differentiation of OLED from LEDs. Flexible OLED has merits, such as capability to be mounted on the curved wall, which is not easy for LEDs to achieve the feature. There are several approaches to make flexible OLEDs especially among those plastic barrier films that can bring high level of flexibility, which could not be achieved by any conventional lighting method. In this paper, barrier films with various water vapor transmission rate values, including 10^{? 6} order, are applied, and the conditions to have almost no dark spot growth under 85 °C and 85% high temperature/humidity test are shown. Flexible OLED panels are manufactured with the world's first roll‐to‐roll equipment using plastic barrier film.     

Determination of standard gibbs energies of formation of Cr2N and CrN

The standard Gibbs energies of formation of Cr₂N and CrN have been measured by an equilibration technique and by using thermogravimetry and differential thermal analysis (TG-DTA) at temperatures ranging from 1232 to 1523 K. The results are expressed as follows:

Germline mutations of the RET proto-oncogene in pedigree with MEN type 2A: DNA analysis and its implications for pediatric surgery

To assess the feasibility of screening for multiple endocrine neoplasia type 2A (MEN 2A), the authors used DNA sequence analysis to evaluate the RET proto-oncogene in a kindred with MEN 2A. The kindred consisted of 95 members (1 to 79 years of age) and their spouses, and spanned five generations. Genomic DNA was extracted from peripheral blood lymphocytes or lymphoblastoid cell lines established from the family members, and the RET gene was amplified by polymerase chain reaction (PCR) using RET-specific primers (10q 11.2) and was sequenced. Periodic endocrine screening also was performed, by measuring the plasma calcitonin concentration after provocation with pentagastrin (0.5 microgram/kg intravenously) to assess its reliability for detecting the associated neoplasms. Nineteen patients were confirmed to have MEN 2A by medical records or the screening program. The DNA sequence of the PCR products from clinically established MEN 2A patients showed a mutation at codon 634 (TGC-->CGC) that resulted in an amino acid change from cysteine to arginine. Endocrine screening tests showed that six other family members had a mutated RET protooncogene. DNA sequencing can detect high-risk cases at a preclinical stage of the disease. The establishment of mutated MEN 2A gene carriers allows pediatric surgeons to consider total thyroidectomy at a very early stage of neoplasm development (C-cell hyperplasia) or even prophylactically.     

Applicability of Ozonation Combined with Electrolysis to 1,4-Dioxane Removal from Wastewater Containing Radical Scavengers

In this paper, applicability of ozonation combined with electrolysis as an advanced oxidation process for the removal of 1,4-dioxane from synthetic wastewater, has been studied. The combined process easily decomposed 1,4-dioxane, and two byproducts were detected in treated water. Although bicarbonate alkalinity was a strong radical scavenger, its influence was abated by air-stripping of carbon dioxide at the anodic compartment of the reactor. Free chlorine produced through anodic oxidation of chloride ion accelerated the COD removal from wastewater, despite the fact that this ion acted as a weak radical scavenger. The combined process was demonstrated to be applicable to the treatment of wastewater containing high concentration of bicarbonate alkalinity and chloride ions.     

Influence of Warm Tempforming on Microstructure and Mechanical Properties in an Ultrahigh-Strength Medium-Carbon Low-Alloy Steel

A 0.4 pct C-2 pct Si-1 pct Cr-1 pct Mo steel was quenched and tempered at 773 K (500 °C) and deformed by multi-pass caliber rolling (i.e., warm tempforming). The microstructures and the mechanical properties of the warm tempformed steels were investigated as a function of the rolling reduction. At rolling reductions of more than 28 pct, not only extension of the martensite blocks and/or the packets in the rolling direction (RD) but also a grain subdivision became more significant, and an ultrafine elongated grain (UFEG) structure with a strong ??110??//RD fiber deformation texture was formed after 78 pct rolling. The tensile deformation behavior became significantly anisotropic in response to the evolution of UFEG structure. The longitudinal yield strength (??_y) of the quenched and tempered sample increased from 1480 to 1860 MPa through the 78 pct rolling, while the transverse ??_y leveled off at around 1600 MPa up to 28 pct rolling. The transverse true fracture stress was also markedly degraded in contrast to the longitudinal one. Charpy impact properties were enhanced at a rolling reduction of 52 pct or more. The 52 pct-rolled sample underwent a ductile-to-brittle transition in the temperature range from 333 K to 213 K (60 °C to ?60 °C), while the 78 pct-rolled sample showed an inverse temperature dependence of the impact toughness because of brittle delamination. The tensile and Charpy impact properties are discussed in association with the microstructural evolution.     

Effect of initial notch orientation on fracture toughness in fail-safe steel

A 0.4C–2Si–1Cr–1Mo steel bar with an ultrafine-elongated grain (UFEG) structures was produced by multi-pass warm caliber rolling. The test sample was machined from the rolled bar with 0°, 45°, and 90° rotation along the rolling direction, and a static three-point bending test was conducted at ambient temperature. The toughness anisotropy on the steel with UFEG structures were studied, including the crack propagation on the basis of the microstructural features. The strength and toughness decreased with an increase in the rotation angle along the rolling direction. The toughness decreased drastically, compared to the strength. The notch orientation dependence on toughness is due to differences in the spatial distribution of weak sites such as {100} cleavage planes and boundaries of elongated grains. For the toughness design in ultrafine-grained materials, it is essential to understand the spatial distribution of these weak sites as well as the grain size.     

A Design of a Low-Voltage Current-Mode Fully-Differential Analog CMOS Integrator Using FG-MOSFETs and Its Implementation

In the field of analog signal processing, there is a strong need for low-voltage and low-power integrated circuits. Especially in the mobile communication circuitry, an analog signal processing circuit must be fed by dry batteries of 1–1.5 V. This paper presents a design and implementation of a current-mode fully-differential analog CMOS integrator operable with such a low supply voltage. This integrator is built with a cross-coupled matched pair of 3-input FG(Floating Gate)-MOSFETs, a matched pair of 2-input FG-MOSFETs, and four bias current sources. In this circuit, both a low apparent threshold voltage of FG-MOSFETs and voltage signal summation at the floating gates are effectively utilized to enable the circuit operation with a low supply voltage and to simplify the circuit configuration. The influence of the common-mode signal and noise to the signal processing are minimized by adopting fully-differential structure. The performance of the proposed integrator circuit is predicted by theoretical analysis and by HSPICE simulations. The circuit works as an integrator in the frequency range 4–750 MHz at a 1.5 V supply voltage and dissipates DC power of about 70 W. The proposed circuit was fabricated by a Motorola 1.2 m double-poly CMOS process in the chip fabrication program of VLSI Design and Education Center (VDEC).     

Rhombohedral Phase in Y2O3-Partially-Stabilized ZrO2

Tetragonal-to-rhombohedral stress-induced phase transformation was studied by X-ray diffraction on the ground surfaces of tetragonal zirconia polycrystals and partially stabilized zirconia containing 2.0 to 5.0 mol% Y₂O₃ prepared by hot isostatic pressing. The rhombohedral phase increased with Y₂O₃ content and also with hot isostatic pressing temperature. The stability of the rhombohedral phase was studied with regard to surface finish and thermal annealing. The subsequent heat treatment of the specimens was found to cause the reverse rhombohedral-to-tetragonal transformation.