Solvent fractionation of hard palm stearin to increase the concentration of tripalmitoylglycerol and dipalmitoyl-stearoyl-glycerol as substrates for synthesis of human milk fat substitute

This research aimed to produce triacylglycerols fraction rich in palmitic acid (PA) at the sn-2 position from hard palm stearin (HPS) through acetone fractionation. Fractionations were done at HPS-to-acetone ratios of 1:3, 1:5 and 1:7 (w/v) and at temperatures of 25, 30 and 35 °C for 3 h. Triacylglycerols with PA at the sn-2 position, such as tripalmitoylglycerol (PPP) and dipalmitoyl-stearoyl-glycerol (PPS), were concentrated in the solid fraction, obtained after separation by filtration. The optimal fractionation conditions were at a HPS-to-acetone ratio of 1:5 (w/v) and 30 °C. The total PPP and PPS content was more than 91%, with a corresponding yield of more than 59%. Triacylglycerols obtained were composed of more than 91% PA in which 88% were at the sn-2 position. Conclusively, the solvent fractionation is a suited alternative method for the preparation of triacylglycerols used for the enzymatic synthesis of 1,3-dioleoyl-2-palmitoylglycerol which is the main triacylglycerol for human milk fat substitute.     

A globally convergent BFGS method for pseudo-monotone variational inequality problems

In this paper, we propose a globally convergent BFGS method to solve Variational Inequality Problems (VIPs). In fact, a globalization technique on the basis of the hyperplane projection method is applied to the BFGS method. The technique, which is independent of any merit function, is applicable for pseudo-monotone problems. The proposed method applies the BFGS direction and tries to reduce the distance of iterates to the solution set. This property, called Fejer monotonicity of iterates with respect to the solution set, is the basis of the convergence analysis. The method applied to pseudo-monotone VIP is globally convergent in the sense that subproblems always have unique solutions, and the sequence of iterates converges to a solution to the problem without any regularity assumption. Finally, some numerical simulations are included to evaluate the efficiency of the proposed algorithm.     

Advances in Applying Computer-Aided Drug Design for Neurodegenerative Diseases

Neurodegenerative diseases (NDs) including Alzheimer’s disease, Parkinson’s disease, amyotrophic lateral sclerosis, and Huntington’s disease are incurable and affect millions of people worldwide. The development of treatments for this unmet clinical need is a major global research challenge. Computer-aided drug design (CADD) methods minimize the huge number of ligands that could be screened in biological assays, reducing the cost, time, and effort required to develop new drugs. In this review, we provide an introduction to CADD and examine the progress in applying CADD and other molecular docking studies to NDs. We provide an updated overview of potential therapeutic targets for various NDs and discuss some of the advantages and disadvantages of these tools.     

Nano-sized carbon hollow spheres for abatement of ethylene

In this paper, the ethylene adsorption capacities of the nano-sized carbon hollow spheres (CNB) and active carbon (AC), the Pd (PdCl₂) impregnated CNB or AC (Pd/CNB, Pd/AC) and heat treatment under various conditions, were studied at different ethylene concentrations from 64 to 1060 ppm. The results indicated that AC had a good ethylene adsorption capacity at high ethylene concentration. Pd impregnation decreased the ethylene adsorption capacity of AC. Heat treatment and H₂ activation could increase the ethylene adsorption capacity, but also lowered than AC itself. CNB had lower ethylene adsorption capacity than AC, but heat treatment and H₂ activation could increase its ethylene adsorption capacity markedly. With activating condition from heat treatment in N₂ at 300 °C to activation in H₂/N₂ at 100 °C, to activation in H₂ at 200 °C, and to activation in H₂ at 300 °C, the ethylene adsorption capacity of Pd/CNB was increased regularly. At low ethylene concentration, viz., 64 ppm, the ethylene adsorption quantities (q _a) by Pd/CNB activated in H₂ at 200 or 300 °C were higher than any other adsorbents. So, activated in H₂ atmosphere at higher than 100 °C, Pd/CNB is particularly advantaged for adsorbing low concentration of ethylene. Amongst all the adsorbents used, Pd/CNB activated in H₂ atmosphere at 300 °C for 2 h has the highest ethylene adsorption capacity at lower concentration than 125 ppm. In addition, all the CNB, Pd/CNB, AC, and Pd/AC samples can be easily regenerated in airflow for more than 3 h.     

Feature Selection for Detecting ICMPv6-Based DDoS Attacks Using Binary Flower Pollination Algorithm

Internet Protocol version 6 (IPv6) is the latest version of IP that goal to host 3.4 × 10³⁸ unique IP addresses of devices in the network. IPv6 has introduced new features like Neighbour Discovery Protocol (NDP) and Address Auto-configuration Scheme. IPv6 needed several protocols like the Address Auto-configuration Scheme and Internet Control Message Protocol (ICMPv6). IPv6 is vulnerable to numerous attacks like Denial of Service (DoS) and Distributed Denial of Service (DDoS) which is one of the most dangerous attacks executed through ICMPv6 messages that impose security and financial implications. Therefore, an Intrusion Detection System (IDS) is a monitoring system of the security of a network that detects suspicious activities and deals with a massive amount of data comprised of repetitive and inappropriate features which affect the detection rate. A feature selection (FS) technique helps to reduce the computation time and complexity by selecting the optimum subset of features. This paper proposes a method for detecting DDoS flooding attacks (FA) based on ICMPv6 messages using a Binary Flower Pollination Algorithm (BFPA-FA). The proposed method (BFPA-FA) employs FS technology with a support vector machine (SVM) to identify the most relevant, influential features. Moreover, The ICMPv6-DDoS dataset was used to demonstrate the effectiveness of the proposed method through different attack scenarios. The results show that the proposed method BFPA-FA achieved the best accuracy rate (97.96%) for the ICMPv6 DDoS detection with a reduced number of features (9) to half the total (19) features. The proven proposed method BFPA-FA is effective in the ICMPv6 DDoS attacks via IDS.     

A multi-step differential transform method and application to non-chaotic or chaotic systems

The differential transform method (DTM) is an analytical and numerical method for solving a wide variety of differential equations and usually gets the solution in a series form. In this paper, we propose a reliable new algorithm of DTM, namely multi-step DTM, which will increase the interval of convergence for the series solution. The multi-step DTM is treated as an algorithm in a sequence of intervals for finding accurate approximate solutions for systems of differential equations. This new algorithm is applied to Lotka–Volterra, Chen and Lorenz systems. Then, a comparative study between the new algorithm, multi-step DTM, classical DTM and the classical Runge–Kutta method is presented. The results demonstrate reliability and efficiency of the algorithm developed.     

Using bent carbon nanotubes for the fabrication of electromechanical switches

An electromechanical switch based on bent carbon nanotubes was fabricated. The shape and structure of the bent carbon nanotubes allows one to produce a low cost and low working voltage switch. The fabrication process is free of any nanolithography. The electrical characteristics of the fabricated device were investigated, both experimentally and theoretically. Actuation of the fabricated device shows hysteresis behavior in the measured I–V curves depending on the structural parameters of the bent nanotubes. The relationship between the pull-in voltage and the morphology of the bent nanotubes was studied by the obtained hysteresis curves. A scanning electron microscope was used for structural analysis. This study introduced an easy way to fabricate electromechanical switches with controllable on/off states.     

Phase Transformations of α-Alumina Made from Waste Aluminum via a Precipitation Technique

We report on a recycling project in which α-Al₂O₃ was produced from aluminum cans because no such work has been reported in literature. Heated aluminum cans were mixed with 8.0 M of H₂SO₄ solution to form an Al₂(SO₄)₃ solution. The Al₂(SO₄)₃ salt was contained in a white semi-liquid solution with excess H₂SO₄; some unreacted aluminum pieces were also present. The solution was filtered and mixed with ethanol in a ratio of 2:3, to form a white solid of Al₂(SO₄)₃·18H₂O. The Al₂(SO₄)₃·18H₂O was calcined in an electrical furnace for 3 h at temperatures of 400–1400 °C. The heating and cooling rates were 10 °C/min. XRD was used to investigate the phase changes at different temperatures and XRF was used to determine the elemental composition in the alumina produced. A series of different alumina compositions, made by repeated dehydration and desulfonation of the Al₂(SO₄)₃·18H₂O, is reported. All transitional alumina phases produced at low temperatures were converted to α-Al₂O₃ at high temperatures. The X-ray diffraction results indicated that the α-Al₂O₃ phase was realized when the calcination temperature was at 1200 °C or higher.