利用补充分组编码降低MIMO-OFDM系统峰均比

多输入多输出正交频分复用（MIMO—OH）M）系统已成为第四代移动通信系统研究中的热点，而OFDM系统产生的高峰均功率比（PAPR）是限制MIMO—OFDM技术实用化的主要障碍之一。详细介绍了补充分组编码技术的基本原理，并通过仿真与测试的结论与其他编码技术进行了比较，验证了此编码技术对降低峰均功率比确实具有很好的效果。     

菱镁矿固硫特性的理论分析

对菱镁矿在固体燃料燃烧过程中的固硫特性进行了理论研究，所得结论对进一步将菱镁矿作为固体燃料燃烧过程中的固硫剂具有非常重要的意义。     

八尺门特大桥φ2.8 m桩基施工质量控制

介绍了八尺门特大桥的工程建况、水文地质情况和施工方案的确定，并较为系统、全面地阐述了该大桥φ2.8m大直径钻孔桩的施工过程。从钢护筒沉桩到灌注过程、每道施工程序、采用的方法、质量的控制要点以及施工中的其它问题进行了较具体的讨论与分析，取得了良好的施工效果。     

NUMERICAL SIMULATION OF STREAMBED HEAT TRANSFER

１．　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｓｉｍｕｌａｔｉｏｎｏｆｓｔｒｅａｍｗａｔｅｒｔｅｍｐｅｒａｔｕｒｅｉｓｓｉｇｎｉｆｉｃａｎｔｌｙｉｍｐｏｒｔａｎｔｆｏｒｔｈｅｓｔｕｄｙｏｆｎｕｍｅｒｉｃａｌｍｏｄｅｌｉｎｇｏｆｒｉｖｅｒｉｃｅｐｒｏｃｅｓｓｅｓ［１］　．Ｈｉｓｔｏｒｉｃａｌｌｙ，ｔｈｅｍａｔｈｅｍａｔｉｃａｌｍｏｄｅｌｉｎｇｏｆｔｈｅｔｒａｎｓｐｏｒｔａｎｄｆａｔｅｏｆｈｅａｔｉｎａｗａｔｅｒｂｏｄｙｈａｓｂｅｅｎｔｈｅｓｕｂｊｅｃｔｏｆｅｘｔｅｎｓｉｖｅｓｔｕｄｙｆｏｒｖａｒｉｏｕｓｒｅ…     

前馈和反馈相结合的控制策略在宝钢线材厂控冷轧线上的应用实践

在详细分析料坯在水箱内冷却热过程特点的基础上，提出了前馈和反馈相结合的水流量优化控制策略，并将该策略应用于宝钢线材厂控冷轧线上。实际运行结果表明：该策略能够合理地控制水箱水流量，从而保证了线材水箱出口处的温度满足工艺要求，大大提高了线材成品的质量。所做工作对国内同类企业有重要的意义。     

部分可渗透直立圆柱的消波作用研究

本文导出了线性波浪作用于上部可渗透的直立刚性圆柱体上的水动力的解析解。在线性有势流的假定下，用特征函数展开方法求出了内部和外部流场的解。给出了不同波浪要素及结构尺寸参数下的数值结果。由结果可知，提高可渗透性可以有效消减波幅。     

冬冷夏热地区户式空调设计与节能分析

以一单元式住宅的风道式户式空调系统为例，探讨了冬冷夏热地区户式空调的新风量确定方法，分析了户式空调的负荷特性，节能设计及户式空调系统的设计负荷与设计风量。     

Analytical general results for handoff dwell time distribution in wireless networks

1 Introduction The calling dwell time characteristic is critical for the user network planning and deployment, e.g., global system for mobile communications (GSM), as well as the next generation wireless multimedia networks, such as, the currently standar…     

减小OFDM信号出现大峰平比的研究方法PTS法

介绍OFDM系统的OFDM信号峰平比 (PAPR)的概念 ,研究减小OFDM信号PAPR值方法的Par tialTransmitSequences(PTS)。     

Comparative study of the elimination of toluene vapours in twin biotrickling filters using two microorganisms Bacillus cereus S1 and S2

BACKGROUND: To investigate the microbial degradation performance of organic pollutants in the atmosphere using a biotrickling filter, two microorganism strains, Bacillus cereus S1 and Bacillus cereus S2, were selected, identified and inoculated into a twin biotrickling filter for comparison. RESULTS: Both strains showed good performance towards the degradation of model organic pollutants when gas flow rates ranged from 100 to 600 L h⁻¹. For S1, the total maximum removal efficiency (RE) of toluene was maintained nearly 100% not only at gas flow rates of 100 L h⁻¹ corresponding to empty bed residence time (EBRT) 199.44 s, but also at gas flow rates of 200 L h⁻¹ (EBRT = 99.72 s) and 300 L h⁻¹ (EBRT = 66.48 s). However, S2 had a much lower degradation capability; near 100% removal efficiency was obtained only at the gas flow rate of 100 L h⁻¹ although both bacteria belong to the same Bacillus cereus. With further increase in gas flow rate, the total REs for both S1 and S2 decreased slightly at first and then dropped sharply to 46% and 35%, respectively, at an EBRT of 33.24 s, corresponding to a gas flow rate of 600 L h⁻¹. Starvation for between 2 and 10 days resulted in the re‐acclimation times of both strains ranging between 1.0 and 15.5 h. CONCLUSION: Strain S1 would be a better choice for inoculation into a biotrickling filter than strain S2, because of its much higher toluene removal capacity and rapid recovery to full performance. Copyright © 2008 Society of Chemical Industry