Green Tax Reforms and Computational Economics A Do-it-yourself Approach

The double or even triple dividend hypothesis of green tax reforms has beena major issue of dispute in both the scientific community and the politicalarena during the last decade. Theoretical analysis has provided a number ofimportant qualitative insights to the debate but lacks of actual policyrelevance due to very restrictive assumptions. Applied research that takes thestep from stylized analytical to complex numerical models usually comes as ablackbox to non-expert modelers. This paper aims at bridging the gap betweenstylized theoretical work and numerical analysis. We develop a flexible,interactive simulation model which is accessible underhttp://brw.zew.de. Users can specify their own green tax reforms andevaluate the induced economic and environmental effects. Based on illustrativesimulations, we demonstrate the usefulness of our do-it-yourself approach fora better understanding of the double (triple) dividend hypothesis.     

Real-Time Detection of Terahertz Pulse Amplitude and Position

A novel and continuous detection scheme for the pulse amplitude and temporal position of a terahertz time domain system is presented. Currently, we have achieved a sampling time of 25 Hz and a resolution of less than 70 fs. The method is therefore very well suited for online measurements in production processes to monitor the thickness and inhomogeneities in the composition of non-conducting materials.     

Sterol glycosides and cerebrosides accumulate in Pichia pastoris, Rhynchosporium secalis and other fungi under normal conditions or under heat shock and ethanol stress

The occurrence of glycolipids such as sterol glycosides, acylated sterol glycosides, cerebrosides and glycosyldiacylglycerols was examined in the three yeast species Candida albicans, Pichia pastoris and Pichia anomala, as well as in the six fungal species Sordaria macrospora, Pyrenophora teres, Ustilago maydis, Acremonium chrysogenum, Penicillium olsonii and Rhynchosporium secalis. Cerebroside was found in all organisms tested, whereas acylated sterol glycosides and glycosyldiacylglycerols were not found in any organism. Sterol glycosides were detected in P. pastoris strain GS115, U. maydis, S. macrospora and R. secalis. This glycolipid occurred in both yeast and filamentous forms of U. maydis but in neither form of C. albicans. This suggests that sterol glycoside is not correlated with the separately grown dimorphic forms of these organisms. Cerebrosides and sterol glycosides from P. pastoris and R. secalis were purified and characterized by mass spectrometry and nuclear magnetic resonance spectroscopy. The cerebrosides are beta-glucosyl ceramides consisting of a saturated alpha-hydroxy or non-hydroxy fatty acid and a Delta4,8-diunsaturated, C9-methyl-branched sphingobase. Sterol glycoside from P. pastoris was identified as ergosterol-beta-D-glucopyranoside, whereas the sterol glucosides from R. secalis contain two derivatives of ergosterol. The biosynthesis of sterol glucoside in P. pastoris CBS7435 and GS115 depended on the culture conditions. The amount of sterol glucoside in cells grown in complete medium was much lower than in cells from minimal medium and a strong increase in the content of sterol glucoside was observed when cells were subjected to stress conditions such as heat shock or increased ethanol concentrations. From these data we suggest that, in addition to Saccharomyces cerevisiae, new yeast and fungal model organisms should be used to study the physiological functions of glycolipids in eukaryotic cells. This suggestion is based on the ubiquitous and frequent occurrence of cerebrosides and sterol glycosides, both of which are rarely detected in S. cerevisiae. We suggest P. pastoris and two plant pathogenic fungi to be selected for this approach.     

Microblogging

Twitter & Co. sind ein aktuelles Trendthema im Web. Dieser Beitrag stellt das Ph?nomen Microblogging vor, beschreibt, warum das Thema ein gro?es Entwicklungspotenzial aufweist und nennt zukünftige Forschungsaufgaben.     

Mikrohärteprüfung an Spanplatten,Spanplattenbeschichtung und Vollholz

Ohne Zusammenfassung Herrn Dr. Gressel. dem Leiter des Forschungsinstitutes für Holzwerkstoffe und Holzleime, sowie Herrn L. Reiter danken wir für die Bereitstellung von Spanplattenprobenmaterial. Besonders Herrn L. Reiter danken wir für ausführliche Diskussionen Ratschl?ge und für die Durchsicht des Manuskriptes     

Vortex-induced flame extinction in two-phase counterflow diffusion flames with CH planar laser-induced fluorescence and particle-image velocimetry

Here the interaction between a laminar two-phase, non-pre-mixed counterflow flame and a vortex is examined. Special emphasis is given to the influence of different flame and vortex parameters on the extinction behavior of the flame. Simultaneous planar laser-induced fluorescence of the CH radical layer produced by the flame and particle-image velocimetry measurements of the flowfield are used to characterize the flame-vortex interaction. These simultaneous diagnostics are used for the first time in this configuration. The extinction processes occurring during the flame-vortex interaction can be analyzed by this method, especially the influence of strain at the flame surface. The influence of the droplets on the extinction behavior appears clearly compared with a fully gaseous flame. The spray flame is weaker and extinguishes earlier than does a gaseous flame. In the measurements an additional broadband signal in the vicinity of the CH layer is probably due to the induced fluorescence of polycyclic aromatic hydrocarbons, excited at the same wavelength.     

Microstructure and modelling of the deformation behaviour of CoCr22Ni22W14 in hot-tensile- and creep tests

The present study describes the application of hot tension experiments in order to predict the creep and tensile behaviour of the highly loaded superalloy CoCr₂2Ni₂₂W₁₄. The results of mechanical tests and transmission electron microscopy (TEM) investigations have been used as input data in a model which describes the high temperature plastic deformation. A common log - log σ plot of tensile and creep data shows a systematic shift of about 10% towards higher stresses in the case of tensile loading. In creep tests the dislocation densities reach their steady-state values at the points of minimal strain rates, whereas in tensile tests the dislocation densities increase at any given time until the tensile strength is reached at significantly higher strains. Under the condition of equal true stresses subgrain formation is more pronounced after tensile than after creep deformation. By including the experimentally determined dislocation densities, the constitutive model yields qualitatively correct predictions of the creep and tensile behaviour.     

Orchestrated structure evolution: modeling growth-regulated nanomanufacturing

Orchestrated structure evolution (OSE) is a scalable manufacturing method that combines the advantages of top-down (tool-directed) and bottom-up (self-propagating) approaches. The method consists of a seed patterning step that defines where material nucleates, followed by a growth step that merges seeded islands into the final patterned thin film. We develop a model to predict the completed pattern based on a computationally efficient approximate Green's function solution of the diffusion equation plus a Voronoi diagram based approach that defines the final grain boundary structure. Experimental results rely on electron beam lithography to pattern the seeds, followed by the mass transfer limited growth of copper via electrodeposition. The seed growth model is compared with experimental results to quantify nearest neighbor seed-to-seed interactions as well as how seeds interact with the pattern boundary to impact the local growth rate. Seed-to-seed and seed-to-pattern interactions are shown to result in overgrowth of seeds on edges and corners of the shape, where seeds have fewer neighbors. We explore how local changes to the seed location can be used to improve the patterning quality without increasing the manufacturing cost. OSE is shown to enable a unique set of trade-offs between the cost, time, and quality of thin film patterning.     

Structural studies on the lipopolysaccharide from a rough strain of Ochrobactrum anthropi containing a 2,3-diamino-2,3-dideoxy-D-glucose disaccharide lipid A backbone

A degradation protocol using de-O-acylation and subsequent alkaline de-N-acylation was applied to the lipopolysaccharide of Ochrobactrum anthropi rough strain LMG 3301. Three main oligosaccharide bisphosphates containing core-lipid A backbone structures were obtained after fractionation by anion-exchange HPLC. Using 1H and 13C NMR spectroscopy, including two-dimensional COSY, TOCSY, and NOE spectroscopy (ROESY and NOESY), the following structures were established: [formula: see text] where Kdo is 3-deoxy-D-manno-octulosonic acid, D-GlcN3N is 2,3-diamino-2,3-dideoxy-D- glucose and R is H or alpha-D-GalpA or 4-deoxy-beta-L-threo-hex-4-enopyranuronic acid, the latter sugar being derived from alpha-D-GalpA by beta-elimination of a substituent attached to 0-4. This is the first report on the isolation from a lipopolysaccharide of an oligosaccharide containing GlcN3N in the lipid A backbone [beta-D-GlcpN3N4P-(1-->6)-alpha-D-GlcpN3N1 P]. Sugar and methylation analysis confirmed the presence of the GalA-->Kdo disaccharide and non-stoichiometric substitution of GalA. It is suggested that Glc is the substituent at 0-4 in GalA and that in the non-degraded lipopolysaccharide the amino group of GlcN is not acylated.