Effect of rare earth addition on Cu-Fe/AC adsorbents for phosphine adsorption from yellow phosphorous tail gas

Phosphine(PH3) is a highly toxic air pollutant,commonly produced in phosphorous chemical industry.But it has received less research attention due to its handling difficultly.CO is the main content of the phosphorous chemical industry tail gas,the concentration of which is always more than 80 vol.%,and it can be the feed gas to produce various valuable products such as formate,oxalate,and methanol and so on.But,PH3 is one of the important barriers,which is harmful to the following chemical process.In order to make use of the tail gas,PH3 should be removed firstly,and CO should be covered in the whole purified procedure at the same time.In this work,the modified activated carbon(MAC) was used as the adsorbent to separate PH3 from the mixture tail gas.Series of MAC adsorbents were prepared for the adsorption of PH3,which loaded Cu-Fe and Ce(La),or separately.The PH3 adsorption capacities,chemical and physical properties of MAC were all investigated.The results showed that over 99% PH3 adsorption efficiency was achieved when used MAC adsorbents.The removal efficiency and PH3 adsorption capacity of the Cu-Fe-Ce/AC(20:1:0.4) were both much higher than those modified activated carbons.The maximum PH3 adsorption capacity was 71 mg of PH3/g of MAC on the Cu-Fe-Ce/AC,which were much higher than literature data using CuO only for adsorbing hydride gases.     

Effect of zinc and cerium addition on property of copper-based adsorbents for phosphine adsorption

A series of copper-based activated carbon (AC) adsorbents were prepared in order to investigate the effect of Zn, Ce addition on Cu-based AC adsorbent for phosphine (PH3) adsorption removal from yellow phosphorous tail gas. N2 adsorption isotherm and X-ray diffrac-tion (XRD) results suggested that the addition of Zn could increase the adsorbent ultramicropores, decrease the adsorbent supermicropores and the adsorbent average pore diameter. Therefore it enhanced the PH3 adsorption capacity. Appropriate amoun...     

低温等离子体协同催化脱除NO_x技术研究进展

利用低温等离子体协同催化脱除氮氧化物(NOx)是目前比较有吸引力和发展前景的技术。本文介绍了低温等离子体协同催化脱除NOx技术的反应机理及研究现状。分别讨论了等离子体的外加电压、等离子体内部结构、温度、还原剂和氧化剂、气体组分以及系统优化等因素对NOx脱除效率的影响,并对该技术进行了展望。