排序方式: 共有32条查询结果,搜索用时 31 毫秒
1.
2.
3.
Aero-engine blisk welded by electron beam welding(EBW) method is a complicated structure. Fixtures were used to control the deformation of blisk during its manufacturing process. Finite element method was utilized to study the evolution of the welding residual stress and deformation of this structure. In which an attenuation function was applied to the double ellipsoid heat source model based on the characteristic of EBW, and the effects of fixtures on the welding residual stresses and deforamtion were also reserached. The simulation results showed that the temperature contour of weld cross section vertical to the weld centerline followed a “V” shape. Moreover, large welding residual stress and distortion were found in the interface between blisk and fixtures. The stress concentration was reduced sufficiently in starting and end part of weldment as the fixtures were removed after welding process, while the removing operation had almost no effects on the welding residual stress in the middle section of weld bead. 相似文献
4.
采用多种软件的综合运用建立了整体叶盘的有限元模型,并基于焊接过程中温度之间相互影响程度选取了顺序依次焊接、90°和180°三种典型的焊接顺序,通过有限元分析的方法对不同焊接顺序产生的变形进行计算和分析.结果表明,以往使用的180°最远距离焊接顺序并不是最合理的焊接顺序,在相同的焊接工艺条件下,顺序依次焊接对整体叶盘圆度的影响相对较小.该分析结果说明在材料不同、焊接方法及结构不同的情况下,焊接顺序没有固定的模式,为整体叶盘及大型复杂结构件焊接顺序的合理选择提供了理论依据. 相似文献
5.
曲伸 《仪表技术与传感器》1988,(2)
美国杂志《激光集锦与光电工艺》1987年第三期发表文章说,通过对有代表性的13家厂商的调查结果表明,光学镀膜设备制造业仍是一个处于兴旺、发展的行业。 一、发展趋势 Danavac公司的Willian F.Murphy指出在镀膜工业中的最新趋势有:采用隔离的净化房、自动化、监控系统、低温泵系统 相似文献
6.
7.
8.
GH4169高温合金惯性摩擦焊接温度场的数值模拟 总被引:3,自引:0,他引:3
根据惯性摩擦焊接过程的特点,结合摩擦学理论在研究了摩擦焊接摩擦面生热变化规律的基础上,建立了一个基于二维轴对称的有限元法传热计算模型.利用该模型可以模拟计算惯性摩擦焊接瞬态温度场的分布.并对同质材料GH4169-GH4169焊接进行了实例计算.用热电偶点焊在工件的表面的方法对GH4169-GH4169焊接过程中的温度变化进行了计算机实时多点测量.结果证实计算结果与试验数据符合良好.从而该模型可为进一步研究惯性摩擦焊接应力场、应变场和缩短量以及优化焊接工艺参数提供有效的依据. 相似文献
9.
10.
采用圆波和三角波两种扫描模式,在不同的扫描幅度下对高温合金GH4169进行电子束焊接试验,分析焊接接头的成形情况、焊缝尺寸、接头横截面的宏观形貌和显微组织。结果表明,圆波比三角波扫描模式焊缝成形差,随着扫描幅度的增加,两种扫描模式下焊缝成形均变差。当扫描幅度超过2 mm时,容易产生咬边缺陷。随着扫描幅度的增加,焊缝的成形系数增加。非扫描情况下,焊缝中心两侧柱状晶夹角接近180°,而在扫描情况下,焊缝中心两侧柱状晶夹角接均小于180°,圆波模式比三角波模式柱状晶夹角大。 相似文献