Microscale Patterning of Mesoscopic PZN-PT Single Crystal Films by Crystal ion Slicing and Laser-Induced Etching

Advances in the fabrication of solid-solution single crystal relaxor ferroelectrics have made it possible to produce highly efficient piezoelectric crystals, and have attracted renewed interest in the use of these crystals for a new generation of piezoelectric transducers, actuators and sensors. Of particular interest is their incorporation into micro-electromechanical systems (MEMS). In this paper we report on the laser-induced wet chemical etching of lead zinc niobate-lead titanate (PZN-PT) in hydrochloric acid (HCl). Argon-ion laser radiation at power levels up to 4 W is focused to a spot diameter of about 15μm and results in the chemical etching of grooves at patterning speeds up to 5μm/sec. Crystal ion slicing, an ion-implant-based film separation technique, is used in combination with laser etching to form 5 to 10μm-thick patterned and freestanding films for incorporation into micro-electromechanical devices.     

Consumer knowledge of foodborne microbial hazards and food-handling practices.

A national telephone survey was conducted of 1,620 randomly selected U.S. residents who spoke English, were at least 18 years old, and resided in households with kitchen facilities. Respondents were interviewed about their recognition of foodborne pathogens, foods at risk for transmitting infection, knowledge of safe food handling, and food-handling practices. One-third of the respondents who prepared meals reported unsafe food hygiene practices: e.g., they did not wash hands or take precautions to prevent cross-contamination from raw meat. Unsafe practices were reported more often by men, adults 18 to 29 years of age, and occasional food preparers than by women, persons 30 years old or older, and frequent food preparers. Respondents who identified a food vehicle for Salmonella spp. were more likely to report washing their hands and cleaning cutting boards after preparing raw meat and poultry. The results raise concerns about consumer food-handling practices. The influence of food safety training, food-handling experience, and age on food-handling practices should be studied further. Awareness of a food vehicle for Salmonella spp., for example, may indicate knowledge of the etiology of foodborne disease that promotes safe food handling. Understanding the factors associated with safe food handling will assist in development of effective safe-food instruction programs.     

An analysis of the Slapper worm

We can prove that the Slapper is a variation of the Apache Scalper worm by comparing the source code. Modifications introduced in the Slapper worm improved the robustness and efficiency of its predecessor's simplistic P2P networking capabilities. Slapper's author also removed certain features from the original-either because they were redundant or to reduce the perception that it was a tool developed to cause direct harm to networks. Among the features the author removed from the Slapper were capabilities to update itself from a remotely specified Web server (perhaps to prevent someone else from replacing this version with a new one), to attack and infect a host specified with a controlling program, and to send spans. Interestingly, the ability to execute distributed denial-of-service attacks on a controlling user's behalf was kept intact. Slapper's author attempted to make communications with a remote controlling program as stealthy and untraceable as possible by removing several commands to query status and obtain feedback from Slapper nodes.     

Peripheral intravenous infusion--another cause of air embolism

We report an unusual complication of intravenous infusion. A 4-week-old baby developed acute cardiopulmonary distress because of air embolism caused by improper preparation of peripheral intravenous set. The estimated amount of infused air was 12 ml (approximately 3.5 ml/kg). The infant recovered promptly after short supportive treatment.     

Use of the ARPE-19 cell line as a model of RPE polarity: basolateral secretion of FGF5

PURPOSE: To determine the polarity of fibroblast growth factor 5 (FGF5) secretions from retinal pigment epithelium (RPE) cells and to examine the viability and utility of the ARPE-19 cell line as a model for the study of RPE polarity. METHODS: Influenza infection and adenovirus-mediated gene transfer were used to deliver and express genes encoding influenza hemagglutinin (HA), p75-NTR (a neurotrophin receptor), low-density lipoprotein (LDL) receptor (LDLR), and FGF5 in confluent monolayers of ARPE-19 cells. The localization of HA, p75-NTR, and LDLR was determined by confocal microscopy. Domain selective biotinylation assays were used to quantitatively determine the polarities of p75-NTR and LDLR. The secretion of FGF5 into the apical and basal media of ARPE-19 cultures was examined by immunoblot analysis of conditioned media. RESULTS: Hemagglutinin and p75-NTR were found to be localized on the apical surface of infected and transduced ARPE-19 cells. In contrast, LDLR was associated preferentially with the basolateral membrane of ARPE-19 cells. Biotinylation studies indicated that 84% of p75-NTR was present on the apical surface, and 79% of LDLR was basolaterally polarized. Over the course of 6 hours, more than 90% of the total secreted FGF5 protein accumulated in the basolateral media. CONCLUSIONS: ARPE-19 cells exhibit a polarized distribution of cell surface markers when examined by either confocal microscopy or surface-labeling assays. This indicates that the ARPE-19 cell line is a valid model for studies of RPE cell polarity. FGF5, a secreted protein normally produced by RPE cells, is accumulated preferentially in the basal media after only 6 hours, suggesting that it is vectorially secreted from the basolateral surface of ARPE-19 cells.     

Role of intimin and bundle-forming pili in enteropathogenic Escherichia coli adhesion to pediatric intestinal tissue in vitro

Attaching and effacing (A/E) lesion formation is central to enteropathogenic Escherichia coli (EPEC) pathogenesis. In vitro experiments with human epithelial cell lines have implicated virulence plasmid-encoded bundle-forming pili (BFP) in initial binding and intimin in intimate attachment and A/E lesion formation. This study investigated the role of BFP and intimin in EPEC interactions with pediatric small intestinal biopsy tissue in in vitro organ culture. Organ culture infections (2 to 8 h) were performed with E2348/69 (a wild-type EPEC O127:H6 clinical isolate) and E2348/69 derivatives including CVD206 (eae deficient), CVD206(pCVD438) (eae-complemented CVD206), CVD206(pCVD438/01) (expressing intimin, which is nonfunctional due to a single amino acid substitution), JPN15 (spontaneous EPEC adherence factor virulence plasmid-cured E2348/69), and 31-6-1(1) (E2348/69 with a TnphoA insertion inactivation mutation in the virulence plasmid-encoded bfpA gene). Scanning and transmission electron microscopy revealed that after 8 h E2348/69 and CVD206 (pCVD438) (both Int+ BFP+) adhered to all specimens, causing A/E lesions with surrounding microvillous elongation. JPN15 and 31-6-1(1) (both Int+ BFP-) adhered and caused A/E lesions although bacteria adhered in "flat," two-dimensional groups. CVD206 and CVD206(pCVD438/01) (both Int- BFP+) did not adhere to any sample, and no pathological tissue changes were seen. Thus, in human intestinal organ culture, BFP do not appear to be involved in the initial stages of EPEC nonintimate adhesion but are implicated in the formation of complex, three-dimensional colonies via bacterium-bacterium interactions. Intimin appears to play an essential role in establishing colonization of EPEC on pediatric small intestinal tissue.     

处理器性能推动车载娱乐系统的发展

以前,汽车还只是一种普通而简单的运输工具.随着电子时代的来临,从防刹车死锁到汽车仪表板,电子和半导体器件在汽车领域的应用变得日益广泛.现在,应用在汽车中的电子娱乐设备将更直接的出现在你面前,比如一个后排座的DVD播放器(其实可以把一个车载收音机也称作娱乐设备,但是它不能像DVD播放器那样令人兴奋).实际上,人们已经有能力在汽车中集成具有无线连接能力的DVD播放器、移动电话、全球定位系统、MP3播放器、卫星电台和因特网浏览器,所有这些都可以通过语音识别和中央控制系统来操控.