Coating of hydroxyapatite on metal plates using thermal dissociation of calcium-EDTA chelate in phosphate solutions under hydrothermal conditions

Coating of hydroxyapatite on various metal plates was carried out by a homogeneous precipitation technique using hydrothermal reactions in Ca(edta)^2-–NaH₂PO₄ at 140–200°C and pH 3.4–10.0. Hydroxyapatite films were formed on the surface of the iron plates in solutions at an initial pH above 4.7, whereas aggregates consisting of needle-like hydroxyapatite crystal radiating from a point in the form of flower deposited as islands on the surface of aluminum, copper and titanium plates. The upper part of the film formed on the surface of the iron plates consisted of needle-like hydroxyapatite particles whereas the bottom of the film consisted of spherical hydroxyapatite particles. The length of the needle-like hydroxyapatite particles increased with decreasing concentration of Ca(edta)^2-.     

Oligosaccharide structures formed during the hydrolysis of lactose by Aspergillus oryzae β-galactosidase

Di-, tri-, tetra-, penta- and hexasaccharides were formed during the hydrolysis of lactose by transgalactosylation reaction of Aspergillus oryzae β-galactosidase. In this study the isolation and characterization of the major constituents of tri-, tetra- and pentasaccharides are described. The structure elucidation of 3 tri-, 2 tetra- and 1 pentasaccharides was carried out by methylation analysis, mass spectrometry and ¹³C-nmr spectrometry. The trisaccharides are $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 3)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-}\text{d}\text{-}\text{glucose}\text{(3′-}\text{galactosyl-lactose}\text{)}$, $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-}\text{d}\text{-}\text{glucose}\text{(6′-}\text{galactosyl-lactose}\text{)}$ and $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-O-[β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)]-}\text{d}\text{-}\text{glucose}\text{(4,6-}\text{digalactosyl-glucose}\text{)}$. Tetrasaccharides are $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-}\text{d}\text{-}\text{glucose}$ and $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 3)}$ [or $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 3)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)]-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-}\text{d}\text{-}\text{glucose}$. Pentasaccharide is $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-}\text{d}\text{-}\text{glucose}$.     

Preparation of micaceous iron oxide by the oxidation of iron with pressurized oxygen in concentrated sodium hydroxide solution at elevated temperatures

Iron powders were oxidized in NaOH solutions of 5–25 mol kg^–1 at 403–563 K and 5 MPa of oxygen partial pressure. Various types and morphologies of iron compounds such as fine particles of Fe₃O₄, micaceous -Fe₂O₃, and coagulated particles of -NaFeO₂ were formed depending on the experimental conditions. The observed critical concentrations of NaOH above which -NaFeO₂ was formed was in good agreement with those thermodynamically calculated for the hydrolysis equilibrium of -NaFeO₂.     

Synthesis of metal nitrides and carbide powders by a spark discharge method in liquid media

Metal nitrides and carbides powders were synthesized by the spark discharge method in liquid ammonia at 100 °C and 11 kV of the spark discharge voltage and in n-heptane at 25 °C and 7.5 kV using the pellets of aluminum, titanium, iron and chromium as the starting material. The main products were AlN, TiN_0.51, -Fe, -Cr₂N in liquid ammonia, and Al₄C₃, TiC, -Fe, Fe₂C and Cr₇C₃ in n-heptane. The agglomerated particle size decreased with increasing melting point of the metal used as the starting material.     

Sintering of Ceria-Doped Tetragonal Zirconia Crystallized in Organic Solvents, Water, and Air

Amorphous CeO₂–ZrO₂ gels were prepared by coprecipitation in ammonia solutions. The onset of crystallization of the gels, from calcining in air, was 420°C, while 200° to 250°C in the presence of water and organic solvents such as methanol and ethanol. The sintering behaviors of CeO₂–ZrO₂ powders were sensitive to the crystallizing conditions, since hard agglomerates formed when the precipitated gels were crystallized by normal calcination in air, whereas soft agglomerates formed when they were crystallized in water or organic solvents. CeO₂–ZrO₂ powders crystallized in methanol and water at 250°C were sintered to full theoretical density at 1150° and 1400°C, respectively, whereas that crystallized by calcination in air at 450°C was sintered to only 95.2% of theoretical density, even at 1500°C.     

Isolation and characterization of a novel gene encoding alpha-L-arabinofuranosidase from Aspergillus oryzae

We cloned and characterized a novel gene (abfA) encoding alpha-L-arabinofuranosidase (alpha-L-AFase) from Aspergillus oryzae. One clone homologous to the alpha-L-AFase gene of Thermotoga maritima was found in an expressed sequence tag (EST) library of A. oryzae and a corresponding gene was isolated. Molecular analysis showed that the abfA gene carried six exons interrupted by five introns and had an open reading frame encoding 481 amino acid residues. The amino acid sequence similarity at active sites to the alpha-L-AFases from other organisms indicated that the alpha-L-AFase encoded by abfA was classified as a family 51 glycoside hydrolase. When the abfA was overexpressed in the homologous hyperexpression system of A. oryzae, a large amount of alpha-L-AFase was produced as intracellular protein. The apparent molecular mass of the purified enzyme was estimated to be 228,000 by gel filtration and that of its subunit as 55,000 by SDS-PAGE, suggesting that the enzyme is a tetramer. The enzyme hydrolyzed p-nitrophenyl-alpha-L-arabinofuranoside but not other p-nitrophenyl glycosides. These results demonstrated that the abfA gene encodes a functional alpha-L-AFase.     

Cloning and expression analysis of two catalase genes from Aspergillus oryzae

Fungi contain distinct genes encoding the same class of enzyme that are differentially regulated according to conditions. We cloned two catalase genes, catA and catB, from Aspergillus oryzae. The catA gene predicts a 747-amino-acid polypeptide sharing 81% identity with Aspergillus fumigatus catalase (catA) and 77% with Aspergillus nidulans catalase (catA). The catB gene predicts a 725-amino-acid polypeptide sharing 82% identity with A. fumigatus catalase (catB) and 75% with A. nidulans catalase (catB). However, the catA and catB genes share little homology (41%) with one another, suggesting that each gene belongs to a distinct gene family. Overexpression studies demonstrated that both genes encode a functional catalase. Promoter assays indicated that the catA gene is developmentally regulated as it was preferentially expressed in solid-state cultures undergoing sporulation. However, its expression was not affected by hydrogen peroxide treatment. Conversely, the catB gene was highly expressed under all culture conditions tested, and it was induced by hydrogen peroxide treatment. These results suggest that the catB gene may be mainly used for detoxification of oxidative stress while the catA gene may have another role such as chaperoning proteins in the spore.     

Self‐Degradable Lipid‐Like Materials Based on “Hydrolysis accelerated by the intra‐Particle Enrichment of Reactant (HyPER)” for Messenger RNA Delivery

RNA‐based therapeutics is a promising approach for curing intractable diseases by manipulating various cellular functions. For eliciting RNA (i.e., mRNA and siRNA) functions successfully, the RNA in the extracellular space must be protected and it must be delivered to the cytoplasm. In this study, the development of a self‐degradable lipid‐like material that functions to accelerate the collapse of lipid nanoparticles (LNPs) and the release of RNA into cytoplasm is reported. The self‐degradability is based on a unique reaction “Hydrolysis accelerated by intra‐Particle Enrichment of Reactant (HyPER).” In this reaction, a disulfide bond and a phenyl ester are essential structural components: concentrated hydrophobic thiols that are produced by the cleavage of the disulfide bonds in the LNPs drive an intraparticle nucleophilic attack to the phenyl ester linker, which results in further degradation. An oleic acid‐scaffold lipid‐like material that mounts all of these units (ssPalmO‐Phe) shows superior transfection efficiency to nondegradable or conventional materials. The insertion of the aromatic ring is unexpectedly revealed to contribute to the enhancement of endosomal escape. Since the intracellular trafficking is a sequential process that includes cellular uptake, endosomal escape, the release of mRNA, and translation, the improvement in each process synergistically enhances the gene expression.